ROWENTA VU2460 Turbo Silence Table Fan User Manual
- June 5, 2024
- Rowenta
Table of Contents
ROWENTA VU2460 Turbo Silence Table Fan
WARNINGS
It is essential that you read these instructions carefully and comply with the following recommendations.
- For your safety, this appliance complies with the applicable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility,
- Before using, always check the condition of the appliance, the power socket, and the power lead.
- Do not pull on the power cable or the appliance, even to unplug it from the wall socket.
- Never insert objects into the appliance (e.g. needles…).
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- *Do not use your appliance in a dusty room or a room where there is a risk of ire.
- This appliance is intended for domestic use only. It must therefore not be used in industrial applications.
- The warranty will be void in the event of damage arising from improper use.
- if the power cable is damaged, it must be replaced by the manufacturer, its after-sales service, or a person with similar qualifications to avoid any danger.
THIS FAN IS EQUIPPED WITH AN ANTI-MOSQUITO SYSTEM
- use only commercial solid refills, compatible with electric vaporizers,
- comply with the manufacturer’s instructions for the use of the refills (some products used by the refill manufacturers are damaging to the environment).
- The cartridge refills are not supplied with the appliance.
- do not operate the anti-mosquito system without a refill,
- allow the anti-mosquito system to cool before handling.
VERY IMPORTANT
- Keep the appliance 50 cm away from any objects (curtains, walls, aerosols, etc.)
- NEVER ALLOW WATER TO PENETRATE THE APPLIANCE.
- Do not touch the appliance with wet hands.
- Before operating, please ensure that :
- The appliance is assembled according to the manufacturer’s instructions.
- The appliance is placed on a stable and firm surface
- The appliance is in a normal operating position (in an upright position on its feet).
- This appliance must not be used in a damp room.
- Only substances recommended for diffusion with the appliance should be used.
- The use of other substances can lead to a risk of toxicity or fire.
VOLTAGE
Before using it for the first time, check that the voltage of your main supply is the same as that shown on the appliance and that your main supply is suitable for the power indicated on the appliance. Your appliance can be used with a power plug without an earth connection. It is a class II appliance (dual electrical insulation ).
ASSEMBLING
- Your appliance is supplied unassembled. For your safety, it is essential to assemble it correctly.
- You must set and use your appliance in compliance with the standards in force in your country.
OPERATION
- Do not try to raise the button (E) when the appliance is in use, as you could damage the oscillation mechanism.
- When you switch the appliance on (plugged into the mains socket), the appliance is in the “STAND BY” Mode (STOP). The electricity consumption is less than 0.5W.
- Operate the fan using the “ON / STAND-BY button (A).
- Then choose the speed you require by pressing once, twice, or three times on the selection +/- button (B).
- For high-performance ventilation, press directly on the TURBO BOOST (C) button which will light up in blue.
OPERATION OF THE ANTI-MOSQUITO SYSTEM
Before handling the anti-mosquito system, it is recommended to allow it to cool and to turn off the appliance.
- Open the protective cover of the anti-mosquito system (fig. 1)
- Insert the refill under the protective grill of the diffuser, taking into account the refill supplier’s recommendations (fig. 2)
- Check that the refill is properly inserted (fig. 3)
- Close the cover (fig. 4) / (fig. 5)
To activate the anti-mosquito function, after the fan has been switched on, press directly on the ANTI-MOSQUITO (D) button which will light up in orange. Your fan will then operate automatically at speed 2 which has been specially designed to provide optimal insecticide spraying. You can switch off this function by selecting any other speed.
You can stop the fan by using the ON / STAND BY (A) button. IMPORTANT We
advise you to unplug your appliance when you are not using it.
PLEASE NOTE The anti-mosquito function is only effective when the anti-
mosquito function is activated. To change the refill, the steps are exactly as
indicated above. In step 2, the new refill will automatically eject the used
one (fig. 6). Throw away the used refill.
CLEANING
- Your appliance must be unplugged before proceeding with any cleaning work.
- You can clean it with a slightly damp cloth.
- Never use abrasive products which might damage the appearance of your appliance
STORAGE
- When you are not using your appliance, store it in a dry place.
- When not using the anti-mosquito system, do not leave a refill in the system.
IN THE EVENT OF PROBLEMS
- Never dismantle your appliance yourself. A poorly repaired appliance maybe dangerous for the user.
- If the appliance ceases to operate or is damaged in any way, contact one of our authorized service centers.
ENVIRONMENT PROTECTION FIRST !
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>