SHENZHEN JIDING ELECTRONIC CO LTD GW06 Smart Water Timer Instruction Manual
- June 12, 2024
- SHENZHEN JIDING ELECTRONIC CO LTD
Table of Contents
SHENZHEN JIDING ELECTRONIC CO LTD GW06 Smart Water Timer
Product Information
- Specifications:
- Product Name: Smart Water Timer
- Water Valve Type: Intelligent
- Water Inlet: NH3/4-11.5in
- Operating Temperature Range: 1°C to 55°C
- Operating Pressure Range: 0.02 to 0.8 Mpa
- Battery Type: 4 x AA batteries (DC1.5V)
- Protection Level: IP55
- Compatibility: Only for outdoor tap water, not for drinking water
Product Usage Instructions
- Initial Setup for Smart Water Valve:
- Install AA batteries:
- Make sure to use four AA batteries to power the smart water valve.
- Do not mix different types of batteries.
- Remove used or depleted batteries from the valve.
- Download the Smart Life App:
- Search for Smart Life in your phone’s app store and install the application.
- Gateway Network Configuration:
- Ensure the gateway is compatible with a 2.4GHz Wi-Fi network.
- If necessary, clear the network configuration to bind to another phone.
- Gateway Power On:
- Connect the gateway to a Type-C charging cable. The indicator light will blink blue when in an unconnected state and turn constantly on when the network configuration is successful.
- Opening the Application:
- Click the + icon in the top right corner of the app.
- Select Add Device to add a new gateway.
- Connect to your home Wi-Fi (compatible with 2.4GHz only).
- Water Valve Irrigation Plan Settings:
- The irrigation plan allows automatic operation of the water valve at specific times each day. Set master irrigation plans for all valves or individual plans for specific valves. A maximum of 3 plans can be set.
FAQs
- Q: Can I use rechargeable batteries with the smart water valve?
- A: No, it is recommended to use only non-rechargeable AA batteries with the smart water valve.
- Q: How many water valves can be connected to the Smart Life App?
- A: The Smart Life App can connect up to 8 water valves.
Intelligent Water Valves Overview
- Operating temperature range: 1℃~55℃
- Operating pressure range: 0.02~0.8Mpa
- Batteries : DC1.5V X4 AA batteries
- protection level: IP55
- Only for outdoor tap water, not for drinking water.
- Input: DC5V
- Protocol: IEEE 802.11b/g/n
- Number of connectable water valves: 8
- Operating temperature: -10℃~45℃
- Wi-Fi Frequency: 2.4GHz
- APP Program: Smart Life
- Connector: TYPE-C
Initial Setup for Smart Water Valve
- Please install AA batteries.
- Please note that the batteries are not included when you receive the product. You will need four AA batteries to power your smart water valve.
- Do not mix alkaline batteries, standard batteries (carbon-zinc), or rechargeable batteries (nickel-cadmium). Used or depleted batteries must be removed from the smart water valve.
- Battery installation direction
- Battery compartment installation direction
- Initial Setup for the Smart Water Valve App
- Download the Smart Life App
* Please search for “Smart Life” in your phone’s built-in app store to install the application.- Gateway Network Configuration
- Gateway Requirements
* The gateway is compatible with 2.4GHz Wi-Fi networks.
* If your current network is 5G, please switch to a 2.4GHz network.
* Each gateway can only be bound to one phone at a time.
* If you need to bind another phone, you will need to clear the network configuration by pressing and holding the gateway’s power button for 5 seconds, waiting until the indicator light starts blinking, then the Gateway can be bound again.
2. **Gateway Power On**
* Please connect the gateway to a Type-C charging cable.
* When the gateway is powered on, the indicator light will blink blue, indicating that it is unconnected and can be connected to the app for network configuration.
* If the gateway’s indicator light is constantly on, it means that the network configuration already works.
3. **Opening the Application**
1. Click the “+” icon in the top right corner
2. Select “Add Device” to add a new gateway.
3. Connect to Your Home Wi-Fi Compatible with 2.4GHz Only
4. Once the device is successfully added， you will be prompted with a connection success message.
5. Press and hold the button on the valve for 5s until the LED blinks, then click “Add valve” to add the valve
6. After successful addition, a valve icon will appear, indicating that the water valve has been successfully connected
7. Icon explanation
* master Water Valve Switch (Gray for Off, Blue for On)
* Set master Watering Plan
* Display master Watering Plan
* Water Valve Status Display (OFF indicates the water valve is closed, ON indicates the water valve is open. A black water valve icon means the water valve is offline.)
* Click to Edit Device Name
* Single water valve switch (grey off, blue on)
* Delete Water Valve – Click to confirm deletion of a paired water valve
* (The battery indicator displays the remaining battery )
* Add Water Valve
* When the water valve icon is bright blue, clicking on it will enter the detailed information display area.
* **The detailed display area of the water valve includes the following information:**
1. The area displays the water valve name, battery level, and on/off status.
2. The area displays the weather status.
3. The area is for setting the irrigation plan
4. The area is for manually switching the water valve on/off.
5. The area displays the irrigation plan
6. The area shows the last irrigation time
7. The area shows the next irrigation time
4. **Water Valve Irrigation Plan Settings**
* The irrigation plan refers to the automatic operation of the water valve at a specific time each day.If a master irrigation plan is set, all water valves will open when the scheduled time arrives.
* If an individual irrigation plan is set for a specific water valve, that water valve will also open when its own irrigation plan time is reached. The limitation of plans is 3.
5. **Precautions**
1. Both the battery and the battery compartment have a specific installation direction. Please follow the instructions for installation.
2. The device should not be used while submerged in water or an environment with a temperature below 1℃.
3. When the battery level is below 10%, please replace all batteries.
4. If the water output decreases significantly, please clean the filter.
5. When the water valve is offline, it may be due to a bad network or low battery level. If the water valve still has power, you can click on the water valve switch to bring it back online. If the water always keeps grey, please move it to a new place closer to the gateway, if still no response, please change the battery
6. When setting the irrigation plan, the start time must be earlier than the end time.FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
co‐located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warranty Plan
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>