BLNAN LD-GB-029WM Motion Sensor Ceiling Light Wired User Manual
- June 17, 2024
- BLNAN
Table of Contents
BLNAN LD-GB-029WM Motion Sensor Ceiling Light Wired
User Manual
LS-CL-GlBW-M-5 
Introduction
Dear customer,
Thank you for purchasing our ceiling light. In order to use this product
correctly, please read and keep this instruction for future reference.
If you have any questions, please contact the following
Email address: support@blnan.net
Product Introduction
This is an infrared motion sensor & light sensor ceiling light. There are 3
modes (Auto/ ON/ G), 3 color temperatures selectable (30001</ 40001</ 5000K),
and optional time (30s/ 1205/ 180S). We are committed to bringing a convenient
and comfortable experience to customers.
Product Specifications
Precautions
Precautions Before Installation:
- Power off before installation.
- Do not exceed the rated voltage.
- Do not install it on the surfaces where are not stable or deformed.
- Do not install it on or above the surface with high temperature.
- Please make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
Precautions During Installation:
-
There must be no corrosive, explosive or flammable materials around the lamp.
-
User should connect the cable correctly, and the lamp should be installed by qualified electrician.
-
Please pay attention to connect the wires correctly, and make sure the cable connection comply with national regulations.
(Description of the supply terminals: Black: Live Wire, White=Neutral Wire, Green=Earth Wire.) -
Please make sure that the lampshade is clear in case of low luminous efficiency.
-
Please make sure that illuminants are securely fixed during the installation.
Precautions About the Product:
- It is not suitable for dimmer switches.
- The LED light source inside the lamp body can not replaceable.
- The lampshade cannot be opened.
- Do not look straight into the light source (illuminant, LED, etc.).
- Pets with larger body shape can trigger lights on.
- During the installation, please avoid close to heating objects (electric heaters, heater, etc.).
Package Contents
Installation Steps
- Rotate and remove the base plate,fix the base plate to junction box with screws(provided)
- Please use the correct size junction box. The screw hole distance of the junction box is: 2.75-3.54 inches.
- Connect power cord and plug the excess wire back into the junction box. (Description of the supply terminals: Black: Live Wire, White: Neutral Wire, Green: Earth Wire.)
- Push and rotate the lamp and install onto base plate.
DETECTION INTRODUCTION:
THREE MODES INTRODUCTION:
- AUlD(Motion & Light Sensor):The light will tum on when detecting movement in DARK enough condition,
- ON(Light Always): The light will keep on all the time.
- G(Only Motion Sensor Mode): The light will turn on as long as it detects human’s movement, not only in the dark but also in the daytime.
TOGGLE SWITCH INTRODUCTION:
3 colors in 1: 3000K/ 4000K/ 5000K color selectable before installation.
MADE IN CHINA
Documents / Resources
|
BLNAN LD-GB-029WM Motion Sensor Ceiling Light
Wired
[pdf] User Manual
LD-GB-029WM Motion Sensor Ceiling Light Wired, LD-GB-029WM, Motion Sensor
Ceiling Light Wired, Sensor Ceiling Light Wired, Ceiling Light Wired, Light
Wired, Wired
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>