BLNAN LD-GB-029WM Battery Operated Wireless Motion Sensor LED Ceiling Light User Manual
- June 16, 2024
- BLNAN
Table of Contents
Rechargeable Motion Sensor LED Light
Model:LS-CL-G180-CHG User Manual
Introduction
Dear customer,
Thank you for purchasing our ceiling light. In order to use this product
correctly, please read and keep this instruction for future reference
lf you have any questions, please contact the following
Email address: support@blnan.net
Product Introduction
This is an Infrared Motion Sensor Ceiling Light, featuring both an infrared
motion sensor and light sensor. With its three color temperature options
(3000K/4000K/6000K) and four modes (Auto/OFF/G/ON), this ceiling light is
versatile and can be tailored to your specific needs.
Additionally, it offers two lighting durations (30S/120S) for further
customization.
Product Specifications
Size | 183CM/7.11.2inch |
---|---|
Input voltage | 5V / 2A |
Battery capacity | 7000mAh |
Luminous Flux | 300LM |
Color Temperature | 3000K / 4000K / 6000K |
Material | PC |
Water resistance rating | IP40 |
CRI | 90 |
Detection Angle | 120° |
Detection Range | 8-16 Feet / 2.4-4.8m |
Charging time | 6-8 Hours |
Charging Port | Type C |
Sensor type | Motion & Light Sensor |
Hold Time | 30S /120S |
Mode | Auto / OFF / G / Always ON |
Life Span | 30000H |
FUNCTION INTRODUCTION
![BLNAN LD-GB-029WM Battery Operated Wireless Motion Sensor LED Ceiling Light
-
Parts 1](https://manuals.plus/wp-content/uploads/2024/01/BLNAN-LD-GB-029WM- Battery-Operated-Wireless-Motion-Sensor-LED-Ceiling-Light-Parts-1.png)
- Infrared motion sensor
- PD: light sensor
- Low Battery: low battery indicator light
- Charge: charging indicator light (red: charging, green: fully charged)
- Type-C charging port
- G (only motion activated)
- OFF: power off
- AUTO (Motion Activated + Light Sensor)
- 120S Hold time
- ON (Always ON mode)
- 30S Hold Time
Working Modes
-
G (ONLY Motion Activated)
Once movements are detected, the ceiling light will automatically turn on regardless
of day or night. -
OFF: Power off.
Power off the light when not in use to save energy. -
AUTO (Motion Activated + Light Sensor)
The ceiling light will only automatically turn ON in darkness when motion is detected. -
ON: Always ON
The light remains on continuously. (Select this mode by adjusting the button on the other side to G or AUTO)
TOGGLE SWITCH INTRODUCTION:
3colors in 1 3000K/ 4000/ 6000K color selectable before installation
C Cool White 60oo
N Nature white 400OK
WWarm White 3OOOK
NOTE:
- This light takes approximately 6-8 hours to fully charge. In constant on mode, the light can work for about 10 hours when fully charged. In induction mode, depending on usage frequency and different light settings, the working time of the ceiling light can range from 30 to 60 days when it is fully charged. The specific duration depends on usage frequency and light settings.
- When the battery level of the motion sensor light is below 3%, a low battery alert will be triggered (red indicator light flashing). Then, the light will only stay on for an additional 15 minutes.
- If you do not use the motion sensor light for an extended period of time, we recommend charging it once every six months to protect the battery life.
DETECTION INTRODUCTION:
![BLNAN LD-GB-029WM Battery Operated Wireless Motion Sensor LED Ceiling Light
- introduction 2](https://manuals.plus/wp-content/uploads/2024/01/BLNAN-LD-GB- 029WM-Battery-Operated-Wireless-Motion-Sensor-LED-Ceiling-Light- introduction-2.png)
Package Contents
![BLNAN LD-GB-029WM Battery Operated Wireless Motion Sensor LED Ceiling Light
- Package](https://manuals.plus/wp-content/uploads/2024/01/BLNAN-LD-GB-029WM- Battery-Operated-Wireless-Motion-Sensor-LED-Ceiling-Light-Package.png)
Installation Steps
-
Remove the back bracket fromthe light: pllease place your handon the back bracket and rotate counterclockwise
-
Install screws on the back bracket and securely fasten it to a flat surface . (The distance between the two holes on the bracket is 2.75 to 3.54 inches.)
-
Align the light with the back bracket and rotate clockwise to secure the light in place.
Safety Precautions:
-
If the light cannot turn on, please check if the battery is charged.
If everything is in order and it still doesn’t work, please contact us. -
To avoid the risk of electric shock or fire. do not disassemble modify, or replace parts of the lamp.
-
If the ambient temperature is above 37C the infrared motion sensor ceiling light’s detection range will be affected.
-
Keep the product away from a source of fire. Do not place it in aocation with high temperatures.
![BLNAN LD-GB-029WM Battery Operated Wireless Motion Sensor LED Ceiling Light
- ce](https://manuals.plus/wp-content/uploads/2024/01/BLNAN-LD-GB-029WM- Battery-Operated-Wireless-Motion-Sensor-LED-Ceiling-Light-ce.png)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>