BLNAN LS-CL-K24W-Dim LED Ceiling Light Dimmable User Manual

DIMMABLE CEILING LIGHT
User Manual
Product Model: LS-CL-K24W-Dim

INTRODUCTION

Dear customer, Thank you for purchasing our ceiling light. In order to use this product correctly, please read and keep this instruction for future reference.
If you have any questions, please contact the following
Email address: support@thInan.net

PRODUCT INTRODUCTION

The product is a dimmable LED ceiling light.
You could directly use the remote control to set the functions.
We are dedicated to the customers to bring a convenient and comfortable experience.

SPECIFICATIONS

IR REMOTE CONTROL OPERATION INSTRUCTIONS

1. ON/OFF
2. Tum off the light after 30 seconds
3. Steplessly up to 100% brightness
4. Steplessly down to 10% brightness
5. Steplessly down to 3000k
6. Steplessly up to 6500k
7. Natural white:4000k
8. .Night light mode
9. Change to 50% brightness
10. Different Color temperature cycle
11. Warm white:3000k
12. Cold white: 6500k

NOTE

• The infrared remote control, need to be aimed at the light.
• The remote control distance is 3-5 meters.
• The color temperature can be changed by the wall switch. (Do not fit for home dimmer!)
• Brightness only can be adjusted by remote control, not by wall switch.

WALL SWITCH OPERATION
You can change the color temperatureaast Settings/4000K/3000K/6500K) by continuously turning on and off (within 5 seconds).
MEMORY FUNCTION
If you keep the current settings for 1 minute and turn off the ceiling light for more than 10 seconds, the light will remember the previous setting when it’s turned back on.

ACCESSORIES LIST

INSTALLATION STEPS

1. Please switch off the power to the entire house. Kindly press the “ ” on the cover and take off the cover.
2. Secure the ceiling light’s bottom to the junction box using the screws provided. Ensure the junction box used is of the correct size. The distance between screw holes on the junction box should be 2.75-4.33 inches.
3. Join the wires of the corresponding colors. Ensure all wires are properly placed. (Supply terminal description: Black Live Wire; White: Neutral Wire; Green: Ground Wire.
4. After connecting the wires, align the 2 protruding corners on the light cover with the holes, and press the “ ” to fix it in place.

PRECAUTIONS

Precautions Before installation:

1. Power off before installation.
2. Do not exceed the rated voltage.
3. Do not install it on the surfaces where are not stable or deformed.
4. Do not install it on or above the surface with high temperature.
5. Please make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.

Precautions During installation:

1. There must be no corrosive, explosive or flammable materials around the lamp.
2. User should connect the cable correctly, and the lamp should be installed by qualified electrician.
3. Please pay attention to connect the wires correctly, and make sure the cable connection comply with national regulations.
4. Please make sure that the lampshade is clear in case of low turninous efficiency.
5. Please make sure that illuminants are securely fixed during the installation.

Precautions About the Product:

1. It is not suitable for dimmers and electronic switches.
2. The LED light source inside the lamp body can not replaceable.
3. The lampshade cannot be opened.
4. Do not look straight into the light source (illuminant, LED, etc.).

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>