BLNAN LD-GB-029WM Motion Sensor LED Ceiling Light User Manual
- June 15, 2024
- BLNAN
Table of Contents
Motion Sensor Ceiling Light
User Manual
LS-CL-G18W-M-S
Introduction
Dear customer,
Thank you for purchasing our ceiling light. In order to use this product
correctly, please read and keep this instruction for future reference.
If you have any questions, please contact the following Email address:
support@binan.net
Product Introduction
This is an infrared motion sensor & light sensor ceiling light. There are 3
modes (Auto/ ON/ G), 3 color temperatures selectable (3000K/ 4000K/ 5000k),
and optional time (30s/ 120S/ 180S).
We are committed to bringing a convenient and comfortable experience to
customers.
Product Specifications
Light Size | ø22025mm/ 08.660.9 8i n |
---|---|
Wattage | 18W |
Voltage | AC120V 60Hz |
Luminous Flux | 1800LM |
Color Temperature | 3000K / 4000K / 5000K |
LED Quantity | 108 PCS |
LED Type | 2835 |
CRI | 90 |
Material | High-quality PC (fireproof) |
Waterproof | IP40 |
Detection Angle | 120° |
Remote Control Frequency | Infrared |
Life Span | 30000H |
Sensor | Motion sensing and light sensing |
Sensor Mode | Auto/ ON/ G |
Delay Time | 30S/120S/180S |
Precautions
Precautions Before Installation:
- Power off before installation.
- Do not exceed the rated voltage.
- Do not install it on the surfaces where are not stable or deformed.
- Do not install it on or above the surface with high temperature.
- Please make sure that no gas, water or electricity pipes and wires can be drilled through or damaged in your chosen mounting location.
Precautions During Installation:
- There must be no corrosive, explosive or flammable materials around the lamp.
- User should connect the cable correctly, and the lamp should be installed by qualified electrician.
- Please pay attention to connect the wires correctly, and make sure the cable connection comply with national regulations. (Description of the supply terminals: Black: Live Wire, White=Neutral Wire, Green=Earth Wire.)
- Please make sure that the lampshade is clear in case of low luminous efficiency.
- Please make sure that illuminants are securely fixed during the installation.
Precautions About the Product:
- It is not suitable for dimmers and electronic switches.
- The LED light source inside the lamp body can not replaceable.
- The lampshade cannot be opened.
- Do not look straight into the light source (illuminant, LED, etc.).
- Pets with larger body shape can trigger lights on.
- During the installation, please avoid close to heating objects (electric heaters, heater, etc.).
Package Contents
Installation Steps
-
Rotate and remove the base plate, fix the base plate to junction box with screws(provided)
-
Please use the correct size junction box. The screw hole distance of the junction box is: 2.75-3.54 inches.
-
Connect power cord and plug the excess wire back into the junction box.
(Description of the supply terminals: Black: Live Wire, White: Neutral Wire, Green: Earth Wire.) -
Push and rotate the lamp and install onto base plate.
DETECTION INTRODUCTION
THREE MODES INTRODUCTION
| |
---|---|---
AUTOCMotion & Light
Sensor):The light will turn on when detecting movement in DARK enough
condition.| ON(Light Always): The light will keep on all the time.| G(Only
Motion Sensor
Mode): The light will turn on as long as it detects human’‘s movement, not
only in the dark but also in the daytime.
TOGGLE SWITCH INTRODUCTION:
3 colors in 1; 3000K/ 4000K/ 5000K color selectable before installation.
MADE IN CHINA
Documents / Resources
|
BLNAN LD-GB-029WM Motion Sensor LED Ceiling
Light
[pdf] User Manual
LD-GB-029WM, LD-GB-029WM, LD-GB-029WM Motion Sensor LED Ceiling Light, LD-GB-
029WM, Motion Sensor LED Ceiling Light, Sensor LED Ceiling Light, LED Ceiling
Light, Ceiling Light, Light
---|---