OPT7 AURA PRO Golf Cart Installation Guide
- June 17, 2024
- OPT7
Table of Contents
OPT7 AURA PRO Golf Cart
INSTALLATION
STEP 1: Inspect the kit to ensure all contents are included.
STEP 2: Decide where to locate the light strips and ensure the wiring has enough length for the control box to be installed in the desired location .
WARNING
- Connecting to more than 10 AMPs will override the kit and cause early failure, ensure it is 10AMPs or less!!
- Please ensure that the LED bars or strips/control box/wiring all are mounted in areas that will not exceed 85℃ or 185℉.
IMPORTANT NOTE! Before You Start
- We provide multiple sets of extension wires for you to configure. You can quickly extend them wherever you want to install them.
AUX WIRING FOR A BRAKE LIGHT
- You may choose the desired color choice directly on the OPT7 Connect app This feature will activate when the aux wiring is connected to the trigger wire for the positive (+) wire of your brake light wire.
WARNING NOTE: You should ONLY set the color of your aux wire to “red” in color choices within the app. If you plan on connecting the aux wire to your brake signal wire.
- STEP 3: Scan the QR code on the back of the control box to download the app.
- STEP 4: Secure the Control box in the desired location with Velcro or zip ties.
- The control box is NOT waterproof. Tuck it away from the elements.
- STEP 5: Secure the light strips using the zip ties to tie all the wiring away from the moving components.
- IMPORTANT: The LED connectors are not waterproof. You will need to use HEAT SHRINK TUBE or ELECTRICAL TAPE around the LED connectors to ensure the longevity of the lighting kit.
- STEP 6: Open the “OPT7 Connect” App, pair your smartphone to the control box, and pick your desired color!
OPT7 CONNECT APP
- Colors
- Modes
- Door Assist
- Support
- Ability to control up to 4 devices at once
QR CODE TO DOWNLOAD
Download the free “OPT7 CONNECT” App
- App iOS (12+) available on the App Store
- Android (6 +) available on Google Play
DISCLAIMER
OPT7 Lighting is not liable for damages or personal injuries while installing
this product. The Installation Guide is intended as assistance to reduce setup
time. OPT7 Lighting assumes no responsibility for improper installation.
If you are unfamiliar with your vehicle or inexperienced with aftermarket
upgrades, please seek professional assistance.
- OPT7 recommends installation for safety and guidance.
- Modified installations or installation recommendations not specified by OPT7 Lighting will void product warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>