KUZCO WS90424 LED Wall Sconce Instruction Manual
- June 17, 2024
- KUZCO
Table of Contents
KUZCO WS90424 LED Wall Sconce
Specifications
- Model: WS90424
- Product Type: LED Wall Sconce
- Dimensions: Not specified
- Weight: Not specified
- Power Source: Hardwired
- Voltage: Not specified
- Wattage: Not specified
- Color Temperature: Not specified
- Lumens: Not specified
- Finish: Not specified
- Material: Not specified
Step 1: Unpackaging
Remove the LED Wall Sconce from its original package.
Step 2: Separating Mounting Plate and Canopy
- Locate the mounting plate (1c) and canopy (2a).
- Remove the canopy screws (2b) to separate the mounting plate from the canopy.
Step 3: Electrical Connections
Make proper electrical connections using the wire nuts (1b) provided in the hardware package:
- Connect the black wire to the hot L.
- Connect the white wire to the neutral N.
- Connect the ground wire to GND.
Step 4: Attaching Mounting Plate
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package.
Step 5: Attaching Canopy
- Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
Contact Information
For technical support, please call: 1-855-855-8926
FAQ:
Q: What should I do if the LED Wall Sconce does not turn on?
- A: Please check the electrical connections and ensure that power is properly supplied to the fixture.
- If the issue persists, contact our technical support for further assistance.
Q: Are the dimensions and specifications of the LED Wall Sconce available?
- A: Unfortunately, the user manual does not provide specific dimensions or specifications.
- Please refer to the product packaging or contact our customer support for detailed information.
Q: Can this LED Wall Sconce be used in outdoor environments?
- A: The user manual does not mention if the LED Wall Sconce is suitable for outdoor use.
- It is recommended to check the product specifications or contact our customer support for clarification.
START FROM HERE
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- This Kuzco LED fixture comes with pre-wired LED module(s)
- Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
- Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application
- 120V input
INSTALLATION INSTRUCTION
- Technical Support: 1-855-855-8926
- Remove fixture from its original package
- Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package
- Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package
- Attach canopy (2a) to mounting plate (1c) with canopy screws (2b)
- 19054 28th Avenue Surrey, BC Canada V3Z 6M3
- T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196 W:kuzcolighting.com
- 20240109
Documents / Resources
|
KUZCO WS90424 LED Wall
Sconce
[pdf] Instruction Manual
WS90424 LED Wall Sconce, WS90424, LED Wall Sconce, Wall Sconce, Sconce
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>