American Standard PLA-A18EA8 Advanced Clean AC 3.0 SpaLet Bidet Seat Instruction Manual

June 17, 2024
American Standard

American Standard PLA-A18EA8 Advanced Clean AC 3.0 SpaLet Bidet Seat

Product Information

Specifications

  • Model: PLA-A18EA8 & PUZ-A18NKA7
  • BTU/H: 18,000
  • Ceiling Cassette Size: 3′ x 3′
  • Heat Pump Universal Outdoor

Indoor Unit
The indoor unit has the following specifications:

  • Operating Temperature Range: test
  • BTU/H: 18,000
  • W: 18,000
  • Pints/h: 8,000
  • Indoor Unit Dimensions (W x D x H): In. [mm]
    • Width: 33-1/16 [840]
    • Depth: 33-1/16 [840]
    • Height: 10-3/16 [258]
  • Weight: Lbs. [kg]
    • Lbs.: 46 [21]
    • Kg: 77 [34.8]

Outdoor Unit
The outdoor unit has the following specifications:

  • Operating Temperature Range: test

  • Refrigerant Piping Size: A A A W CFM

  • Outdoor Unit Dimensions (W x D x H): In. [mm]

    • Width: 31-13/16 x 11-13/16 x 24-13/16 [809 (+62) x 300 x
      630]

    • Depth: 37-1/16 x 16-3/16 x 27-7/16 [941 x 411 x 697]

    • Height: 100 [45]

  • Weight: Lbs. [kg]

    • Lbs.: 112 [51]
    • Kg: 115

Indoor Unit Accessories: PLA-A18EA8

  • Control Interface: Remote Sensor Wired Remote Controller (PAC-SF40RM-E)

Outdoor Unit Accessories: PUZ-A18NKA7

  • PAC-SJ07SG-E
  • PAC-SG63DP-E
  • PAC-SG64DP-E
  • PAC-SK52ST
  • M21EC0397
  • M21EC1397
  • MAC-871DS
  • HG-A5
  • PAC-SJ96MA-E
  • S144-250
  • S144-50
  • S164-250
  • S164-50
  • ULTRILITE1
  • QSMS1801M
  • QSMS2401M
  • QSWB2000M-1
  • QSWBSS
  • QSMS1201M
  • WB-PA4
  • WB-RE4
  • WB-SD4

Product Usage Instructions

Installation
Follow these steps to install the product:

  1. Choose a suitable location for the indoor unit.
  2. Mount the indoor unit on the ceiling using the provided accessories.
  3. Connect the refrigerant piping between the indoor and outdoor units.
  4. Install the outdoor unit in a well-ventilated area.
  5. Connect the electrical wires according to the provided diagram.
  6. Test the system to ensure proper installation.

Operation
To operate the product, follow these steps:

  1. Turn on the power supply.
  2. Select the desired mode (cooling, heating, etc.) using the remote control or wired controller.
  3. Adjust the temperature and fan speed as desired.
  4. The product will automatically maintain the set temperature and provide comfortable air conditioning.

FAQ

Q: Can I use a wireless remote controller with the PLA-A18EA8 indoor unit?
A: No, the PAC-SF40RM-E wired remote controller is not compatible with wireless remote controllers.

Q: What is the recommended ceiling height for the indoor unit?
A: The minimum recommended ceiling height is 118-1/8″ (3000mm) or more.

Q: Can I install the outdoor unit in a small space?
A: No, there should be at least 17-11/16″ (450mm) of space in the ceiling for proper installation.

INDOOR UNIT FEATURES

  • Space-efficient ductless installation
  • Equipped with 3D i-see Sensor® for enhanced comfort and energy efficiency
  • Airflow settings for high and low ceiling applications
  • Individual vane settings for direct/indirect airflow control or variable airflow patterns
  • Knockouts for outside-air intake and branch-duct run
  • Filter indicator signal
  • Easy-to-clean, washable filter (optional high-efficiency filter available – requires multi-function casement)
  • Built-in condensate lift mechanism
  • Ideal for retail shops, classrooms, office spaces, conference centers, building lobbies, and more
  • Multiple control options available:
    • kumo cloud® smart device app for remote access
    • Third-party interface options
    • Wired or wireless controllers

OUTDOOR UNIT FEATURES

  • Variable speed INVERTER-driven compressor
  • Pre-charged with refrigerant volume for piping length up to 70 ft
  • Low ambient cooling down to 0°F providing 100% capacity
  • 24-hour continuous operation (cooling mode)
  • High pressure protection
  • Fast restart
  • Superior energy and operational efficiency
  • Seacoast protection*
    • External Outer Panel: Phosphate coating + Acrylic-Enamel coating
    • Fan Motor Support: Epoxy resin coating (at edge face)
    • Separator Assembly Valve Bed: Epoxy resin coating (at edge face)
    • Blue Fin treatment is an anti-corrosion treatment that is applied to the Heat exchanger coil to protect it against airborne contaminants.
    • Heat exchanger coil and base panel rated for 2,000 hours in accordance with ASTM B117 testing

*Seacoast protection standard from 2022 production

SPECIFICATIONS

PLA-A18EA8 & PUZ-A18NKA7

Cooling at 95°F1

| Maximum Capacity| BTU/H| 18,000
---|---|---|---
Rated Capacity| BTU/H| 18,000
Minimum Capacity| BTU/H| 8,000
Maximum Power Input| W| 1,250
Rated Power Input| W| 1,250
Moisture Removal| Pints/h| 2.4
Sensible Heat Factor| 0.85
Power Factor [208V / 230V]| %| 95.3 / 95.3

Heating at 47°F2

| Maximum Capacity| BTU/H| 23,000
Rated Capacity| BTU/H| 19,000
Minimum Capacity| BTU/H| 7,900
Maximum Power Input| W| 1,700
Rated Power Input| W| 1,300
Power Factor [208V / 230V]| %| 95.8 / 95.8

Heating at 17°F3

| Maximum Capacity| BTU/H| 13,500
Rated Capacity| BTU/H| 11,000
Maximum Power Input| W| 1,390
Rated Power Input| W| 1,300

Efficiency

| SEER2| 25.0
EER21| 14.4
HSPF2 [IV]| 9.2
COP at 47°F2| 4.28
COP at 17°F at Maximum Capacity3| 2.85
ENERGY STAR® Certified| Yes

Electrical

| Voltage, Phase, Frequency| 208/230, 1, 60
Guaranteed Voltage Range| V AC| 198 – 253
Voltage: Indoor – Outdoor, S1-S2| V AC| 208/230
Voltage: Indoor – Outdoor, S2-S3| V DC| 24
Short-circuit Current Rating [SCCR]| kA| 5
Recommended Fuse/Breaker Size (Oudoor)| A| 15
Recommended Wire Size [Indoor – Outdoor]| AWG| 14
Power Supply| Indoor unit is powered by the outdoor unit

Indoor Unit

| MCA| A| 1.0
Fan Motor Full Load Amperage| A| 0.28
Fan Motor Type| DC Motor
Airflow Rate at Cooling, Dry| CFM| 460–490–570–600
Airflow Rate at Cooling, Wet| CFM| 380–420–530–560
Airflow Rate at Heating, Dry| CFM| 420–460–570–600
Sound Pressure Level [Cooling]| dB[A]| 28–29–31–32
Sound Pressure Level [Heating]| dB[A]| 28–29–31–32
Drain Pipe Size| In. [mm]| 1-1/4 [32]
Condensate Lift Mechanism, Maximum Distance| In. [mm]| 33-7/16 [850]
Coating on Heat Exchanger| —
External Finish Color| White Munsell 6.4Y 8.9/0.4
Unit Dimensions| W x D x H: In. [mm]| 33-1/16 x 33-1/16 x 10-3/16 [840 x 840 x 258]
Package Dimensions| W x D x H: In. [mm]| 34-19/64 x 35-35/64 x 15 [871 x 903 x 381]
Unit Weight| Lbs. [kg]| 46 [21]
Package Weight| Lbs. [kg]| 77 [34.8]
Indoor Unit Operating Temperature Range| Cooling Intake Air Temp [Maximum / Minimum]*| °F| 90 DB, 72 WB / 66 DB, 61 WB
Heating Intake Air Temp [Maximum / Minimum]| °F| 77 DB / 59 DB

NOTES

  • AHRI Rated Conditions
    • 1Cooling (Indoor // Outdoor)
    • °F 80 DB, 67 WB // 95 DB, 75 WB
  • (Rated data is determined at a fixed compressor speed)
    • 2Heating at 47
    • °F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 47 DB, 43 WB 3Heating at 17
    • °F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 17 DB, 15 WB
  • Conditions
    • 4Heating at 5
    • °F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 5 DB, 4 WB

*Indoor/Outdoor Unit Operating Temperature Range (Cooling Air Temp [Maximum / Minimum]):

  • Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.
    • Wind baffles required to operate below 23°F DB in cooling mode.
    • Heat pump system with wind baffle: 0°F – 115°F.
    • Refer to wind baffle documentation for further information.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re- start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

  • System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

***Blue Fin Coating Standard from 2022 production:

  • PU(Y/Z)-A(12/18)NKA7 – Beginning with serial number 12U*****
  • PU(Y/Z)-A(24/30/36/42)NKA7 – Beginning with serial number 1ZU*****

PLA-A18EA8 & PUZ-A18NKA7

Outdoor Unit

| MCA| A| 11.0
---|---|---|---
MOCP| A| 28
Fan Motor Full Load Amperage| A| 0.5
Fan Motor Output| W| 46
Airflow Rate [Cooling / Heating]| CFM| 1590 / 1590
Refrigerant Control| LEV
Defrost Method| Reverse Cycle
Coating on Heat Exchanger| Blue Fin Coating***
Sound Pressure Level, Cooling1| dB(A)| 44
Sound Pressure Level, Heating2| dB(A)| 46
Compressor Type| INVERTER-driven twin rotary
Compressor Model| SNB130FQCMC-L1
Compressor Rated Load Amps| A| 7
Compressor Locked Rotor Amps| A| 12.0
Compressor Oil [Type // Charge]| oz.| FV50S // 16
External Finish Color| Ivory Munsell 3Y 7.8/1.1
Base Pan Heater| N/A
Unit Dimensions| W x D x H: In. [mm]| 31-13/16 (2+7/16) x 11-13/16 x 24-13/16 [809 (+62) x 300 x 630]
Package Dimensions| W x D x H: In. [mm]| 37-1/16 x 16-3/16 x 27-7/16 [941 x 411 x 697]
Unit Weight| Lbs. [kg]| 100 [45]
Package Weight| Lbs. [kg]| 112 [51]

Outdoor Unit Operating Temperature Range

| Cooling Air Temp [Maximum / Minimum]*| °F| 115 DB / 0 DB
Heating Air Temp [Maximum / Minimum]| °F| 70 DB, 59 WB / 12 DB, 14 WB
Heating Thermal Lock-out / Re-start Temperatures**| °F| 8 / 12

Refrigerant

| Type| R410A
Pre-Charged Refrigerant Amount| Lbs, oz| 4.0, 14.0
Maximum Pre-Charged Piping Length| Ft. [m]| 70.0 [21.0]
Additional Refrigerant Charge Per Additional Piping Length| oz./Ft. [g/m]| 0.2 [19]

Piping

| Gas Pipe Size O.D. [Flared]| In.[mm]| 1/2 [12.7]
Liquid Pipe Size O.D. [Flared]| In.[mm]| 1/4 [6.35]
Maximum Piping Length| Ft. [m]| 100 [30]
Maximum Height Difference| Ft. [m]| 100 [30]
Maximum Number of Bends| 15

NOTES

  • AHRI Rated Conditions
    • 1Cooling (Indoor // Outdoor)
    • °F 80 DB, 67 WB // 95 DB, 75 WB
  • (Rated data is determined at a fixed compressor speed)
    • 2Heating at 47
    • °F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 47 DB, 43 WB3Heating at 17
    • °F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 17 DB, 15 WB
  • Conditions
    • 4Heating at 5°F (Indoor // Outdoor)
    • °F 70 DB, 60 WB // 5 DB, 4 WB

*Indoor/Outdoor Unit Operating Temperature Range (Cooling Air Temp [Maximum / Minimum]):

  • Applications should be restricted to comfort cooling only; equipment cooling applications are not recommended for low ambient temperature conditions.
    • Wind baffles required to operate below 23°F DB in cooling mode.
    • Heat pump system with wind baffle: 0°F – 115°F.
    • Refer to wind baffle documentation for further information.

**Outdoor Unit Operating Temperature Range (Cooling Thermal Lock-out / Re- start Temperatures; Heating Thermal Lock-out / Re-start Temperatures):

  • System cuts out in heating mode to avoid thermistor error and automatically restarts at these temperatures.

***Blue Fin Coating Standard from 2022 production:

  • PU(Y/Z)-A(12/18)NKA7 – Beginning with serial number 12U*****
  • PU(Y/Z)-A(24/30/36/42)NKA7 – Beginning with serial number 1ZU*****

INDOOR UNIT ACCESSORIES

PLA-A18EA8

Control Interface

| 3-Pin Connector| □ PAC-715AD
---|---|---
Airzone ZBS Wired Blueface Principal Controller White| □ AZZBSBLUEFACECB
Airzone ZBS Wired Blueface Principal Controller White| □ AZZBSBLUEZEROCB
Airzone ZBS Wired Lite Controller White| □ AZZBSLITECB
Airzone ZBS Wireless Lite Controller White| □ AZZBSLITERB
Airzone ZBS Wireless Think Controller White| □ AZZBSTHINKRB
CN24 Relay Kit| □ CN24RELAY-KIT-CM3
IT Extender| □ PAC-WHS01IE-E
kumo station® for kumo cloud®| □ TAC-WHS01HC-E
Procon BACnet® and Modbus® Interface| □ PAC-UKPRC001-CN-1
Remote Operation Adapter‡| □ PAC-SF40RM-E
Thermostat Interface| □ PAC-US445CN-1
USNAP Adapter| □ PAC-WHS01UP-E
Wireless Interface for kumo cloud®| □ PAC-USWHS002-WF-2

Remote Sensor

| Flush Mount Remote Temperature Sensor| □ PAC-USSEN002-FM-1
Flush Mount Temperature Sensor| □ PAC-USSEN001-FM-1
Remote Temperature Sensor| □ PAC-SE41TS-E
Wireless temperature and humidity sensor for kumo cloud®| □ PAC-USWHS003-TH-1

Wired Remote Controller

| Deluxe Wired MA Remote Controller†| □ AAR-40MAAU
Simple Ductless Wired Remote Controller| □ PAC-SDW01RC-1
Simple MA Remote Controller†| □ PAC-YT53CRAU-J
Touch MA Controller†| □ PAR-CT01MAU-SB

Wireless Remote Controller

| kumo touch™ RedLINK™ Wireless Controller| □ MHK2
Lockdown bracket for remote controller| □ RCMKP1CB
Wireless MA Receiver| □ PAR-SR32MA-E
Wireless MA Remote Controller| □ PAR-FL32MA-E
Wireless Remote Contoller| □ PAR-SL101A-E
Wireless Signal Receiver Panel| □ PAR-SR4LU-E
Casement| Multi-function Casement| □ PAC-SJ41TM-E

Condensate

| Blue Diamond (Advanced) Mini Condensate Pump w/ Reservoir & Sensor (208/230V) [recommended]| □ X87-721
Blue Diamond (MicroBlue) Mini Condensate Pump (110/208/230V) up to 18,000 BTU/H| □ X86-003
Blue Diamond Sensor Extension Cable — 15 Ft.| □ C13-103
Refco Condensate Pump (100-240 VAC) up to 120,000 BTU/H| □ COMBI

Disconnect Switch

| (30A/600V/UL) [fits 2” X 4” utility box] – Black| □ TAZ-MS303
(30A/600V/UL) [fits 2” X 4” utility box] – White| □ TAZ-MS303W
Filter| High Efficiency Filter Element**| □ PAC-SH59KF-E
i-see Sensor® Panel| Grille with 3D i-see Sensor®| □ PLP-41EAEU

Lineset

| 100’ x 1/4” x 100’ / 1/2” Lineset (Twin-Tube Insulation)| □ MLS141212T-100
15’ x 1/4” x 15’ / 1/2” Lineset (Twin-Tube Insulation)| □ MLS141212T-15
30’ x 1/4” x 30’ / 1/2” Lineset (Twin-Tube Insulation)| □ MLS141212T-30
50’ x 1/4” x 50’ / 1/2” Lineset (Twin-Tube Insulation)| □ MLS141212T-50
65’ x 1/4” x 65’ / 1/2” Lineset (Twin-Tube Insulation)| □ MLS141212T-65
Shutter Plate| Shutter Plate| □ PAC-SJ37SP-E
Space Panel| Space Panel| □ PAC-SJ38AS-E

NOTES
‡PAC-SF40RM-E (Unable to use with wireless remote controller)

OUTDOOR UNIT ACCESSORIES

PUZ-A18NKA7

Air Outlet Guide Air Outlet Guide □ PAC-SJ07SG-E

Centralized Drain Pan

| Centralized Drain Pan| □ PAC-SG63DP-E
Drain Pan| □ PAC-SG64DP-E

Control/Service Tool

| Control/Service Tool| □ PAC-SK52ST
M- & P-Series Maintenance Tool Cable Set| □ M21EC0397
USB/UART Conversion Cable (Required for all laptop connection)| □ M21EC1397
Drain Socket| Drain Socket| □ MAC-871DS
Hail Guards| Hail Guard| □ HG-A5
M-NET Converter| M-NET Converter| □ PAC-SJ96MA-E

Mini-Split Wire

| 14 Gauge, 4 wire MiniSplit Cable—250 ft. roll| □ S144-250
14 Gauge, 4 wire MiniSplit Cable—50 ft. roll| □ S144-50
16 Gauge, 4 wire MiniSplit Cable—250 ft. roll| □ S164-250
16 Gauge, 4 wire MiniSplit Cable—50 ft. roll| □ S164-50
Mounting Pad| Condensing Unit Mounting Pad: 16” x 36” x 3”| □ ULTRILITE1

Stand

| 18” Single Fan Stand| □ QSMS1801M
24” Single Fan Stand| □ QSMS2401M
Condenser Wall Bracket| □ QSWB2000M-1
Condenser Wall Bracket – Stainless Steel Finish| □ QSWBSS
Outdoor Unit Stand — 12” High| □ QSMS1201M

Wind Baffle

| Front Wind Baffle| □ WB-PA4
Rear Wind Baffle| □ WB-RE4
Side Advanced Wind Baffle| □ WB-SD4

INDOOR UNIT DIMENSIONS

PLA-A18EA8

NOTE

  1. CHOOSE THE GRILLE AMONG THE DEDICATED GRILLES.
  2. REINFORCE THE SUSPENSION BOLT FOR EARTHQUAKE-RESISTANCE AS NEEDED.
  3. FOR THE SUSPENSION BOLT, USE M10 OR W3/8. (PROCURED AT THE LOCAL SITE.)
  4. FOR DRAIN PIPE, USE VP-25(O.D. n1-1/4*([ 32) PVC TUBE). DRAIN PUMP INCLUSION. RAISE IS MAX 33-7/16 (850mm) FROM THE CEILING.
  5. ELECTRICAL BOX MAY BE REMOVED FOR THE SERVICE PURPOSE. MAKE SURE TO SLACK THE ELECTRICAL WIRE LITTLE BIT FOR CONTROL/POWER WIRES CONNECTION.
  6. THE HEIGHT OF THE INDOOR UNIT IS ABLE TO BE ADJUSTED WITH THE GRILLE ATTACHED.
  7. REQUIRES “E” OR MORE SPACE BETWEEN THE TRANSOM AND CEILING FOR THE INSTALLATION.
  8. WHEN INSTALLING THE BRANCH DUCTS, BE SURE TO INSULATE ADEQUATELY. OTHERWISE CONDENSATION AND DRIPPING MAY OCCUR. (IT BECOMES THE CAUSE OF DROPLET OR DROPLET DRIPPING.) |
  9. AS FOR NECESSARY INSTALLATION/SERVICE SPACE, PLEASE REFER TO THE RIGHT AT FIGURE.
  10. FOR THE INSTALLATION OF THE OPTIONAL HIGH EFFICIENCY FILTER OR MULTI-FUNCTIONAL CASEMENT,REFER TO SPECIAL DRAWING.

American Standard-PLA-A18EA8 -Advanced -Clean-AC-3.0 -SpaLet-Bidet-Seat-fig-
\(1\)

OUTDOOR UNIT DIMENSIONS

PUZ-A18NKA7

American Standard-PLA-A18EA8 -Advanced -Clean-AC-3.0 -SpaLet-Bidet-Seat-fig-
\(2\)

Free space around the outdoor unit (basic example)

FOUNDATION BOLTS
Please secure the unit firmly with 4 foundation (M10<W3/8>) bolts. (Bolts, washers and nut must be purchased locally).

PIPING-WIRING DIRECTION
Piping and wiring connections can be made from the rear direction only.

FORM# PLA-A18EA8 & PUZ-A18NKA7 – 202310 © 2023 Mitsubishi Electric Trane HVAC US LLC. All rights reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

American Standard User Manuals

Related Manuals