American Standard Ovalyn Undercounter Sink Instructions
- June 7, 2024
- American Standard
Table of Contents
American Standard Ovalyn Undercounter Sink Instructions
Ovalyn™ Undercounter Sink
❏ 0495.221 Unglazed rim
❏ 0495.300 Glazed underside (made to order)
- Classic oval undermount sink
- Unglazed rim
- Made from vitreous china
- Front overflow
- Supplied with mounting kit (047194-0070A) and template
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Nominal Dimensions
17-1/8″ x 14-1/8″ (435 x 359mm
Bowl size:
15-1/16″ (382mm) wide
12-1/16″ (306mm) front to back
5-1/2″ (140mm) deep
❏ 0496.221 Unglazed rim
❏ 0496.300 Glazed underside (made to order)
Nominal Dimensions
19-1/4″ x 16″ (489 x 406mm)
Bowl size:
17″ (432mm) wide
14″ (356mm) front to back
5-1/2″ (140mm) deep
❏ 0497.221 Unglazed rim
❏ 0497.300 Glazed underside
Nominal Dimensions
21-1/2″ x 17-3/8″ (546 x 441mm)
Bowl size:
19″ (483mm) wide
15-3/8″ (391mm) front to back
5-1/2″ (140mm) deep
Compliance Certifications –
Meets or Exceeds the Following Specifications:
- ASME A112.19.2M for Vitreous China Fixtures
- CAN/CSA B45 series
Compliance Certifications –
Meets or Exceeds the Following Specifications:
- ASME A112.19.2M for Vitreous China Fixtures
- CAN/CSA B45 series
NOTES:
- DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P” TRAP ARE SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK. PLEASE NOTE MINIMUM INTERIOR CLEARANCE DIMENSION (K). FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. USE ENCLOSED TEMPLATE FOR COUNTERTOP CUTOUT SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2. These measurements are subject to
change or cancellation. No
responsibility is assumed for use of superseded or voided pages
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1
ACCESSIBLE AND USEABLE BUILDINGS AND FACILITIES – CHECK LOCAL CODES.
Countertop 864mm (34″)
from finished floor. Lavatory installed 76mm (3″
) from front edge of countertop. Countertop thickness to be 25mm (1″) maximum.
