American Standard Touchless Chair Height Elongated Complete Toilet Installation Guide
- June 7, 2024
- American Standard
Table of Contents
American Standard Touchless Chair Height Elongated Complete Toilet
Installation Guide
780AA709 Chair Height Elongated Toilet
- Complete toilet includes bowl, tank, sensor, installation parts, seat and wax ring
- Simple hand wave touchless flush technology
- 2-1/2″ diameter sensor module can be installed on wall within 3 feet of toilet or on top of toilet tank itself
- Siphon action jetted bowl
- Ultra-low consumption (1.28 gpf/4.8 Lpf) utilizes 20% less water
- Meets EPA WaterSense® criteria
- 12″ (305mm) rough installation
- 3″ flush valve with integrated fill valve
- 2-1/8″ trapway bowl with EverClean® surface included
- Obtains best 1,000g MaP flush score**
- Powered by 3 AAA sensor and 4 AA control module batteries (included)
- Convenient, manual polished chrome override flush actuator on side of tank
- Limited lifetime warranty on chinaware, limited 5 year warranty on all mechanical parts, and limited 1 year warranty on electronic parts
Nominal Dimensions:
30-3/16″ x 15-13/16″ x 30-11/16″ (768 x 400 x 781mm)
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
To Be Specified:
- Color: White
- Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ICC ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
Maximum Performance (MaP) testing performed by IAPMO R&T Lab. MaP Report conducted by Gauley Associates Ltd. and Koeller and Company
- EVERCLEAN®
- EPA WATERSENSE® CERTIFIED
- WATER EFFICIENT
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12″)
FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. SUPPLY NOT INCLUDED
WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
