American Standard Toilet Flush Valve With Side-Mount Instruction Manual
- June 7, 2024
- American Standard
Table of Contents
American Standard Toilet Flush Valve With Side-Mount
PRODUCT FEATURES:
- Hands-free infrared sensor-operated gear actuator with chrome plated metal housing
- Angled Sensor delivers reliable flush even with toilet seat in raised position
- Self-cleaning brass piston with integral wiper spring prevents clogging and valve run-on
- Electronic courtesy flush button
- Optional Sanitary Flush: Automatic flush after 24 hours of non-use
- Object Detection Indicator: LED blinks when user or object is detected
- User in View Indicator: Green LED flashes 3 times after user is detected for 5 seconds
- Low Battery Indicator: Yellow LED flashes when batteries need to be replaced
- Easy Battery Replacement: Water does not need to be shut off to change batteries
- Chloramine-resistant EPDM seals
- No external volume adjustment
- Can be installed left or right handed
- Installation tools included
MODEL NUMBER:
-
6047SM.111 Manual Flush Valve with Side-Mount
Operator for 1-1/2″ flushometer bowl, 1.1 gpf/4.2 Lpf -
6047SM.121 Manual Flush Valve with Side-Mount
Operator for 1-1/2″ flushometer bowl, 1.28 gpf/4.8 Lpf -
6047SM.161 Manual Flush Valve with Side-Mount
Operator for 1-1/2″ flushometer bowl, 1.6 gpf/6.0 Lpf
OPERATING PRESSURE:
25 psi (flowing)-80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
BATTERY LIFE:
100,000 flushes (3+ years @ 3,000 flushes per month)
(4) “C” alkaline batteries included
ADJUSTABLE RANGE:
8″ to 48″ (32″ default)
RECOMMENDED SPECIFICATION:
Toilet flush valve includes sensor-operated gear actuator with metal casing.
Brass valve body and cover with chrome finish. Features self-cleaning brass
piston valve with integral wiper spring in bypass orifice to prevent clogging.
Valve closes and does not need to be reset after loss of water pressure.
Includes sweat solder kit with wall flange and cover tube. Vacuum breaker and
angle stop with vandal resistant cap and back-flow protection included.
Roughing-in Dimensions
Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be 6″ (152mm) minimum above fixture. Consult Codes for details.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>