American Standard 2691004 Townsend Freestanding Tub User Manual
- June 1, 2024
- American Standard
Table of Contents
American Standard is devoted to making life, in the heart of your home, better every day…
OWNERS MANUAL
Townsend® Freestanding Tub
High Gloss Acrylic Surface
Model 2691004
2691004 Townsend Freestanding Tub
…so, thank you for inviting us in! With the very best in kitchen and bathroom products, we are here to help make your life happier, healthier and simpler. Our commitment to quality, innovation and performance has made us part of your everyday routine for nearly 150 years, and we look forward to being a part of your life for many years to come.
Learn more at www.AmericanStandard.com
REGISTER YOUR WARRANTY
Try the easy-scan QR code to quickly enter your information or find your
product’s detailed warranty here:
www.AmericanStandard.com/warranty
Registering allows you to keep your product information safe, and us the
ability to contact you in the event of a product recall or any news about your
purchase.
And if ever you have a question or need help…? Call us at
1-855-815-0004
INSTALLATION INSTRUCTIONS
Thank you for selecting American Standard – the benchmark of fine quality for
over 150 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. Certain installations may
require professional help.
INSTALLATION PREPARATION
-
Please unpack carefully and identify all parts needed for installation by using the Box Contents as a reference.
Inspect the product and report any damages or missing parts immediately to customer care by calling 800-442-1902. Follow the prompts for consumer/bathing. Local building codes vary by location. Observe all local plumbing and building codes. -
Take extra care in handling the surface. Use only non-abrasive cloths to avoid scratching.
-
Wear protective equipment during installation to avoid injury.
-
Please keep these instructions for after care and customer service details.
NOTE: Must purchase Drain Kit 1582.000.YYY which contains matched finish metal over flow cover and drain.
BEFORE YOU BEGIN
Inspect your product thoroughly before installing. Take extra care in handling
surfaces of the bath and use only non-abrasive cloths to avoid scratching.
Observe all local plumbing and building codes.
INSTALLATION INSTRUCTIONS
IMPORTANT GENERAL INFORMATION
This unit is best installed by two people.
Cover drain with tape prior to installation to prevent the loss of small
parts.
Unpack your unit carefully and inspect for freight damage. Lay out and
identify all parts using Box Contents as a reference. Before discarding the
carton check to see that no small hardware parts have fallen to the bottom of
the box. If any parts are damaged or missing refer to the description noted in
the instructions when inquiring about replacements.
NOTE: Tub water fittings can be installed in one of 3 ways; Wall Mounted,
Floor Mounted or Deck Mounted.
Location of the access panel must be considered BEFORE installation of the
tub. The tub access panel must be accessible if connecting deck mount fillers.
Drain connection can be mounted through the access panel or through the floor.
ROUGH-IN INFORMATION
TUB INSTALLATION
Place the tub on a finished, level floor in the desired location.
Using a marker, trace the outline of the tub drain hole onto the floor.
NOTE: If using existing P-Trap location, then skip to Step 3.
Install the P-Trap in the marked drain location. P-Trap is installer provided.
Place the tub again in the desired location with the drain hole directly in
line with the P-trap.
Using an erasable marker or pencil, trace the outline of the tub on the floor
(see Fig. 1).
Using the adjustable feet on the underside of the tub, ensure that the tub is
level.
Ensure that there is a gap between the tub base and the floor. Gap shall not
exceed 3/16″ (5mm).
(See Fig. 2)
Install drain per instructions provided with Drain Kit 1582.000.YYY.
Drain Kit 1582.000.YYY purchased separately.
INSTALLING THE 1-1/2″ (38MM) DIAMETER TAIL PIECE ASSEMBLY INTO P-TRAP
8″ (203mm) tail piece included with Drain Kit 1582.000.YYY.
A slip-joint nut and a flanged, 1-1/2″ (38mm) diameter tail piece are
recommended. (See Fig. 3)
Slide the slip-joint nut over tail piece towards the flanged end as shown.
Slide the P-trap slip-joint nut and seal over the tail piece as shown.
Insert the tail piece into the P-trap.
The flange of the tail piece should be approximately 2″ (51mm) above the
finished floor when fully inserted to the P-trap.
The tail piece can be cut if necessary.
Carefully set the tub into position using the outline on the floor as a guide.
Connect the tailpiece to the tub drain. Tighten all of the drain connections.
Fill the tub with water and draitn. Check for leaks and re-tighten connections
as necessary.
Apply a bead of Tub & Tile caulk around the bottom edge of the tub where it
meets the floor.
Remove any excess caulking.
POST INSTALLATION CLEAN-UP
Remove all construction debris. Install any accessories, shelves or doors
according to manufacturer’s installation instructions.
Post installation clean-up generally can be completed using warm water and
liquid dishwashing detergent.
Stubborn dirt or stains may be removed using granular Spic and Span® mixed
with water.
Painter’s naphtha can be used to remove excess adhesives and/or wet oil-base
paint.
FEATURES OF YOUR NEW AMERICAN STANDARD BATHTUB
Your new bathtub has been molded in the newest plumbing fixture material
available today. The unit has a tough durable finish that is simple and easy
to care for.
The colors have been formulated to enhance your choice of bathroom
decorations. The high gloss surface is resistant to impact and chemicals and
will retain its lasting luster with proper care and maintenance.
AFTERCARE AND CLEANING
Always fill the tub with temperate water. Excessively hot water may cause
surface damage.
Remove bath mat after use and hang to dry. Allowing bath mat to dry in the tub
may cause surface damage.
Clean after use with a mild liquid household detergent cleaner. Abrasive
cleaners such as Lestoil®, Lysol® Disinfectant (spray or concentrate), or
Lysot® Basin, Tub and Tile Cleaner, Windex®, Mr. Clean®, Dow® Disinfectant
Bathroom Cleaner, or cleaning products in aerosol cans should not be used.
DO NOT USE HARSH CHEMICALS ON TUB SURFACE
Do not use wire brushes, knives or sharp objects to remove stains, cigarette
tar deposits, or other surface blemishes.
Abrasive cleaners or powders must not be used, since they will dull the
surface.
Do not wax areas where you walk or stand.
Do not allow nail polish remover, acetone, dry cleaning fluid, paint remover
or other solvents to come into contact with the surface.
Clean the surrounding surface immediately after using caustic drain cleaners.
Burning cigarettes will damage the surface.
Should damage to the fixture occur, repairs can be made quickly and easily.
Your distributor or builder can provide details.
SPIC AND SPAN? is a registered trademark of The Spic And Span Company
LESTOIL® is a registered trademark of the Clorox Company
LYSOL? is a registered tradernark of Reckitt Benckiser
WINDEX? is a registered trademark of S.C. Johnson & Son, inc
MR. CLEAN? is a registered trademark of Agile Pursuits Franchising, Inc.
DOW?® is a registered trademark of Dow Chemical Company
TELL US WHAT YOU THINK!
Please leave us a product review or storyat
AmericanStandard.com/reviews
Find installation videos at
youtube.com/americanstandard
Register your warranty and sign up for an idea-filled newsletter at
AmericanStandard-us.com/support/warranty
PLEASE COMPLETE AMERICAN STANDARD WARRANTY REGISTRATION PROCESS AND SAVE THIS
WARRANTY INFORMATION IMPORTANT:
Registration of the sink must be completed for this warranty to become
effective. Your registration will make it easier to contact you in the event
of a product recall.
INSTRUCTIONS: Register your sink at www.AmericanStandard.com. Please save your
proof of purchase (sale receipt). If you need assistance or do not have access
to our website, please contact American Standard Customer Care at:
800-442-1902. An American Standard
representative will assist in completing the warranty registration.
In California, your warranty rights remain intact even if you do not complete the registration process.
SHARE YOUR NEW PRODUCT!
Tag us @american_standard on Instagram and show us how your new product looks.
WANT MORE INFO?
For questions or help call us at
855-815-0004, or visit
AmericanStandard.com
UNITED STATES
American Standard Brands 865 Centennial Ave.
Piscataway, New Jersey 08854
Attention: Director of Customer Care
For residents of the United States, warrantyinformation may also be obtained
by calling the following toll free number:
855-815-0004
www.AmericanStandard.com
CANADA
LIXIL Canada, Inc.
5900 Avebury Rd.
Mississauga, Ontario
Canada L5R 3M3
Toll Free: 800-387-0369
AmericanStandard.ca/support/warranty
MEXICO
American Standard B&K Mexico
S. de R.L. de C.V.
Via Morelos #330
Col. Santa Clara
Ecatepec 55540 Edo. Mexico
Toll Free: 800-839-1200
AmericanStandard.com.mx/garantia
755423-100 EN Rev.2 (11/23)
2691004
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>