VITEK VT-4281 W Electronic Multi Cooker Instructions

: June 4, 2024
: VITEK

Table of Contents

VITEK VT-4281 W Electronic Multi Cooker
DESCRIPTION
SAFETY MEASURES
BEFORE THE FIRST USE
CLEANING AND CARE
STORAGE
DELIVERY SET
RECYCLING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VITEK VT-4281 W Electronic Multi Cooker

VITEK VT-4281 W Electronic Multi Cooker-PRO

DESCRIPTION

VITEK VT-4281 W Electronic Multi Cooker-1

Multicooker body
Control panel
Display
Lid opening button
Steam valve
Lid
Bowl
Multicooker carrying handles
Power cord
Control panel
On/off button «START/STOP»
Keep warm mode on the button «KEEP WARM»
«PORRIDGE» program
«PILAW» program
«RICE» program
Product selection indicators «MEAT-CHICKEN-FISH»
Cooking time increase button
Cooking time decrease button
«SLOW COOKING» program
«BAKING» program
«ROASTING» program
«STEAM COOKING» program
«STEWING» program
«BABY MENU» program
«DELAYED START» function
Accessories
Measuring cup
Spatula
Steam rack

ATTENTION! For additional protection, it is reasonable to install a residual current device (RCD) with a nominal operating current not exceeding 30 mA. To install RCD, contact a specialist.

SAFETY MEASURES

Before using the electrical appliance read this manual carefully and keep it for further reference. Use the unit for its intended purpose only as specified in this manual. Mishandling the unit can lead to its breakage and cause harm to the user or damage to his/her property.

Before using the unit, examine the power cord closely and make sure that it is not damaged. Do not use the unit if the power cord is damaged.
Before switching the unit on, make sure that the mains voltage corresponds to the unit operating voltage.
The power cord is equipped with a «Europlug»; insert it into a socket that has a reliable grounding connection.
Do not use adapters for plugging the unit in.
Make sure that the power cord is properly inserted into the main socket.
Place the unit on a flat heat-resistant surface away from moisture, heat sources, and open flame.
Place the unit with free access to the main socket.
Use the unit in places with proper ventilation.
Do not expose the unit to direct sunlight.
Do not place the unit too close to the wall and to the furniture walls.
Make sure that the power cord does not contact hot surfaces and sharp furniture edges.
Avoid damaging the power cord isolation.
Do not touch the power cord or the power plug with wet hands.
Do not immerse the unit, the power cord and the power plug into water or any other liquids.
If the unit is dropped into water, unplug it immediately by taking the power plug out of the mains socket. Do not put your hands into water!
Apply to the authorized service center for further use of the unit.
Do not insert foreign objects into the openings of the unit or between its parts.
Do not let foreign objects or edges of clothes get between the lid and the unit body.
Do not leave the unit unattended, if you are not using the unit, switch it off and unplug it.

To avoid burns, do not bend over the steam release opening. Be very careful when opening the multicooker lid during and immediately after cooking. Danger of burns by hot steam!

When the unit is operating in the «Roasting» mode, do not bend over the multicooker bowl to avoid burns by splashing hot oil.
Do not leave the unit lid open during the operation, except when operating in the «Roasting» mode.
Do not touch the surface of the lid during the multicooker operation, open the lid only by pressing the multicooker lid opening button.
To avoid burns by hot steam, be very careful when opening the multicooker lid.
Keep the steam release openings and the steam valve clean, and clean them when they get dirty.
Never use the unit without the installed bowl, do not switch the multicooker on without foodstuff and a sufficient amount of liquid in the cooking bowl.
Do not use the multicooker if the silicone gasket on the inner side of the lid is damaged.
Follow the recommendations as to amount of dry products and liquids.
Do not remove the bowl during the unit operation.
Do not cover the multicooker during operation.

Attention! When steaming food, watch the level of liquid in the bowl, add water into the bowl as needed. Do not leave the unit unattended!

Do not carry the multicooker during operation. Use the carrying handles, having unplugged the unit, removed the bowl with food and let the multicooker cool down preliminarily.
The lid, the cooking bowl and the body parts heat up strongly during operation, do not touch them, if you need to take out the hot bowl, use potholders.
Clean the unit regularly.
For child safety reasons do not leave polyethylene bags used as packaging unattended.

Attention! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

Do not allow children to touch the unit body and the power cord during the unit operation.
Do not allow children to use the unit as a toy.
During the unit’s operation and breaks between operation cycles, place the unit out of reach of children.
The unit is not intended for usage by physically or mentally disabled persons (including children) or by persons lacking experience or knowledge if they are not under the supervision of a person who is responsible for their safety or if they are not instructed by this person on the usage of the unit.
Never use the unit if the power cord or the power plug is damaged, if the unit works improperly or after it was dropped.
Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected or after it was dropped, unplug the unit and apply to any authorized service center from the contact address list given in the warranty certificate and on the website www.vitek.ru.
To avoid damages, transport the unit in the original package only.
Keep the unit in a dry cool place out of reach of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

After unit transportation or storage under cold (winter) conditions, it is necessary to keep it for at least three hours at room temperature before switching on.

ATTENTION!

During the first operation of the multicooker, some foreign smell from the heating element can appear. It is normal.
Never leave the operating unit unattended.
To avoid getting burns, be very careful when opening the lid (6).
Do not bend over the steam valve (5) release openings on the multicooker lid (6) and do not place open parts of your body above the steam valve (5) or the hot bowl (7)!
Watch the food during cooking, if necessary, stir the products with the plastic spatula (26).
Do not use metal objects for stirring or removing the products from the bowl (7) as they can damage the non-stick coating of the bowl (7).
Unpack the unit, and remove any stickers and packing materials that can prevent multicooker operation.
Place the multicooker on a flat steady and heat-resistant surface capable of carrying the weight of the multicooker with the products inside it.
Do not place the multicooker near heat sources, near a gas or electric stove or a cooking unit.
Place the unit keeping at least a 20 cm gap between the multicooker body and the wall and 30-40 cm of space above the unit.
Do not place the unit close to objects that can be damaged by the released steam of high temperature.

Attention! Do not place the multicooker near bathtubs, kitchen sinks or other containers filled with water.

Open the lid (6) by pressing the button (4) and remove the bowl (7).
Wash all removable parts with a soft sponge and a neutral detergent: the bowl (7), the steam rack (27), the spatula (26) and the measuring cup (25). Then rinse them under running water and dry.
Wipe the multicooker body (1) and the lid (6) with a damp cloth, then wipe it dry.

RULES OF USING OF THE COOKING BOWL(7)

Use the multicooker bowl (7) for its intended purpose only. Do not place it on heating units or cooking surfaces.
Do not replace the bowl (7) with another container.
Always make sure that the heating element surface and the bottom of the bowl (7) are clean and dry.
Do not use the bowl (7) as a container for mixing products.
Never chop products directly in the bowl (7) to avoid damage of the non-stick coating.
Never leave and keep any foreign objects in the bowl (7).
During cooking stir the products only with a plastic spatula (26).
Do not use metal objects that can damage the non-stick coating of the bowl (7).
Wash the bowl (7) right after cooking.
Do not put bowl (7) under a cold water jet right after cooking, first let the bowl (7) cool down to room temperature.
The bowl (7) is not intended for washing in a dishwashing machine.

SHORT DESCRIPTION OF CONTROL PANEL BUTTONS (2)

Note:

the operation mode buttons on the control panel (2) are sensory, you just need to touch the button to switch the necessary operation mode on.
pressing of each button is accompanied by a sound signal.

«START/STOP» button (10)

Insert the plug of the power cord (9) into the mains socket. You will hear a sound signal, the standby mode symbols «- – – -» will be shown on the display (3).
Press the required cooking program button, the button illumination will be flashing, and the flashing digital symbols of the cooking program will appear on the display (3), the cooking time is set by default (see the table «COOKING PROGRAMS»).
After you select the cooking program, press the button (10) «START/STOP» to switch the multicooker on, the cooking program button illumination will be glowing constantly, the remaining cooking time digital indications will be shown on the display (3).
To switch the cooking program off and set the multicooker to the standby mode press the button (10) «START/STOP», you will hear a sound signal, the multicooker will be switched off and the standby mode symbols «- – – -» will appear on the display (3).

«KEEP WARM» button (11)

after the cooking program is finished you will hear sound signals, the multicooker will be automatically switched to the keep warm mode. the button (11) illumination will light up, the display (3) will show the operation time in the keep warm mode.
To switch the keep warm mode off press the button (10) «START/STOP», the multicooker will switch to the standby mode «- – – -».
If you want to switch the keep warm mode on, press the button (11) «KEEP WARM», the button (11) «KEEP WARM» illumination will light up and start flashing, the flashing digital symbols of the default keep warm mode operation time «4:00» will appear on the display (3). You can set the required keep warm mode operation time with the buttons (16, 17) (see the table «COOKING PROGRAMS»).
Switch the keep warm mode on by pressing the button (10) «START/STOP», the button (11) illumination will be glowing constantly and the remaining time of the keep warm mode operation will be shown on the display

Cooking program selection buttons (12, 13, 14, 18 (light indicators 15), 19, 20, 21, 22, 23).

When you press the cooking program button, the selected program button illumination will light up and start flashing, the default cooking time will be shown on the display (3), except the «RICE» program (see the table «COOKING PROGRAMS»).

Cooking time setting buttons (16, 17)

After selecting the cooking program you can set the required cooking time (see the table «COOKING PROGRAMS») by pressing the buttons (16, 17), the set cooking time will be shown on the display (3).

«DELAYED START» button (24)

The delayed start function allows setting the necessary time of delayed start of the cooking program (see the table «COOKING PROGRAMS»).
Select a cooking program by pressing the corresponding button, if necessary, set the program operation time with the buttons (16, 17) and then press the button (24) «DELAYED START», the button (24) illumination will be flashing and the flashing digital symbols of the default delayed start time «1:00» will appear on the display (3). Set the necessary delayed start time with the buttons (16, 17) (see the table «COOKING PROGRAMS»), switch the multicooker on with the button (10) «START/ STOP», the button (24) illumination will be glowing constantly and the remaining delayed start time will be shown on the display (3).
After the delayed start time runs out, the symbol «0» will appear on the display (3), the multicooker will switch on and start cooking according to the preset program.
Attention! Never leave the operating unit unattended.

COOKING PROGRAMS

Watch the cooking process and switch the multicooker off when the food is ready. Never leave the plugged-in multicooker unattended.
During the cooking program operation do not leave the lid (6) open.
Do not open the lid (6) during the «Baking» program operation.
In the «Roasting» program, the unit operates similarly to a kitchen stove, always watch the cooking process and stir the products during roasting.
To avoid scorching the products, switch the keep warm function off after the end of «Baking» program.
See recipes of dishes in the Recipe book (supplied with the unit). All recipes are to be taken as recommendations as the required amount and proportions of the ingredients may vary depending on local peculiarities of the food and altitude above sea level.

USING THE MULTICOOKER
Loading foodstuffs and connecting the multicooker to the mains

Notes:

Do not use the bowl (7) for washing cereals and do not chop products in the bowl (7), this can damage the non-stick coating.
Make sure that there are no foreign objects, dirt or moisture in the process chamber and on the bottom of the bowl (7).
Wipe the outer surface and the bottom of the bowl (7) dry before use.
In the middle of the heating element there is a temperature sensor . Make sure that nothing prevents the sensor’s free movement.
Make sure that the level of ingredients and liquids in the bowl (7) does not exceed the maximal mark and is not below the minimal mark.

«RICE» program (14)
Use the «CUP» scale to make fluffy rice. Measure the required amount of rice with the measuring cup (25), wash the rice and put it in the bowl (7). Pour water up to the mark corresponding to the rice cup amount. For example, after putting four measuring cups of rice, pour water up to the mark «4» according to the «CUP» scale.

Note:

the capacity of the measuring cup (25) is about 180 ml;
the taste of cooked rice depends on the sort of rice and the amount of water;
add more water to cook fluffy rice;
add less water to cook harder rice;
perhaps, you’ll have to experiment with sorts of rice and the amount of water according to your taste;
before cooking rice you can add some oil or seasonings.
Put the washed rice into the bowl (7).
Place the bowl (7) in the multicooker process chamber. Make sure that the outer surface of the bowl (7) is clean and dry, and the bowl itself (7) is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Insert the power plug into the mains socket. You will hear a sound signal, the sleep mode symbols «- – – -» will be shown on the display (3).
Press the «RICE» cooking program button (14), the button (14) illumination will be flashing. – If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «RICE» cooking program will start.

Switch the «RICE» cooking program on by pressing the button (10) «START/STOP», the «RICE» button (14) will glow constantly.
During the «RICE» cooking program operation the looped symbols «-» will be shown on the display (3), after the required temperature is reached, the remaining operation time digital symbols will appear on the display (3).
During the rice cooking the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «RICE» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
If you want the cooked rice to remain hot, do not switch the multicooker off and do not unplug it.

Note: it is recommended not to use the keep warm mode for a long time to avoid changing of the flavor properties of the cooked rice.

Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display. Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Stir the cooked rice with the spatula (26).
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked rice from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

«PILAF» program (13)

Put the required ingredients for the pilaf (see the Recipe book) into the bowl (7) and add the necessary amount of water.
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Insert the power plug into the mains socket. You will hear a sound signal, the sleep mode symbols «- – – -» will be shown on the display (3).
Press the «PILAF» cooking program button (13), the button (13) illumination will be flashing and the default cooking time «0:30» will be shown on the display (3).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «PILAF» cooking program will start.

Switch the «PILAF» cooking program on by pressing the button (10) «START/STOP», the «PILAF» button (13) will glow constantly.
The digital indications of the remaining time of the program «DELAYED START» or «PILAF» will be shown on the display (3).
During the program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «PILAF» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

«PORRIDGE» program (12)

Put the prepared cereal into the bowl (7) (see the Recipe book), when adding water do not exceed the 2/3 of the maximal capacity of the bowl (7).
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Insert the power plug into the mains socket. You will hear a sound signal, the sleep mode symbols «- – – -» will be shown on the display (3).
Press the «PORRIDGE» cooking program button (12), the button (12) illumination will be flashing and the default cooking time «0:15» will be shown on the display (3).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «PORRIDGE» cooking program will start.

Switch the «PORRIDGE» cooking program on by pressing the button (10) «START/STOP», the «PORRIDGE» button (12) will glow constantly.
During heating the symbols «HEAT» will be shown on the display (3), after the preset temperature is reached, the «PORRIDGE» cooking program will start, and the remaining operation time digital symbols will appear on the display (3).
During the program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «PORRIDGE» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

«SLOW COOKING» program (18)
«SLOW COOKING» cooking program has additional functions for cooking meat, chicken or fish. Special cooking time and temperature are available for each function.

Put the required ingredients (see the Recipe book) into the bowl (7) and add the necessary amount of water, do not exceed 4/5 of the maximal capacity of the bowl (7).
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Plug the power cord into the mains socket, you will hear a sound signal, the display (3) will show the sleep mode symbols «- – – -».
Press the button (18) «SLOW COOKING», the button (18) illumination will be flashing, the symbol (15) «MEAT» will light up, and the default time «1:00» will be shown on the display.
Depending on the added ingredients, press the button (18) «SLOW COOKING» consequently, the symbols (15) «CHICKEN-FISHMEAT» will alternately light up.
For each product there is a default cooking time (see the table «COOKING PROGRAMS»).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «SLOW COOKING» cooking program will start.

Switch the cooking program on by pressing the button (10) «START/STOP», the button (18) «SLOW COOKING» illumination will glow constantly, the remaining operation time digital indications will appear on the display (3).
During the program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «SLOW COOKING» cooking program is finished you will hear a sound signal, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

ROASTING» program (20)
Note: the «DELAYED START» and «KEEP WARM» functions are not available for the «ROASTING» program. «ROASTING» cooking program has additional functions for cooking meat, chicken or fish. Special cooking time and temperature are available for each function.

Put the products into the bowl (7), do not exceed 1/2 of the maximal capacity of the bowl (7).
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Do not close the lid (6).
Plug the power cord into the mains socket, you will hear a sound signal, the display (3) will show the sleep mode symbols «- – – -».
Press the button (20) «ROASTING», the button (20) illumination will be flashing, the symbol (15) «MEAT» will light up, and the default time «0:35» will be shown on the display.
Depending on the added ingredients, press the button (20) «ROASTING» consequently, the symbols (15) «CHICKEN-FISH-MEAT» will alternately light up.
For each product there is a default cooking time (see the table «COOKING PROGRAMS»).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
Switch the «ROASTING» program on by pressing the button (10) «START/STOP», the «ROASTING» button (20) illumination will glow constantly, the digital symbols «HEAt» will appear on the display (3), and after the set temperature is reached, the display (3) will show the remaining operation time digital symbols.

Note:

the «ROASTING» program operates similarly to a kitchen stove, always watch the cooking process and stir the products during roasting with the plastic spatula (26);
during the operation of the «Roasting» program, do not bend over the multicooker bowl to avoid burns by splashing hot oil;
after the «ROASTING» program is finished, you will hear sound signals, the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
If you need to switch the multicooker off before the «ROASTING» program is finished, press the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

«STEWING» program (22)
«STEWING» cooking program has additional functions for cooking meat, chicken or fish. Special cooking time and temperature are available for each function.

Put the required ingredients (see the Recipe book) into the bowl (7) and add the necessary amount of water, do not exceed 4/5 of the maximal capacity of the bowl (7).
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Plug the power cord into the mains socket, you will hear a sound signal, the display (3) will show the sleep mode symbols «- – – -».
Press the button (22) «STEWING», the button (22) illumination will be flashing, the symbol (15) «MEAT» will light up, and the default time «0:35» will be shown on the display.
Depending on the added ingredients, press the button (22) «STEWING» consequently, the symbols (15) «CHICKEN-FISH-MEAT» will alternately light up.
For each product there is a default cooking time (see the table «COOKING PROGRAMS»).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «STEWING» cooking program will start.

Switch the cooking program on by pressing the button (10) «START/STOP», the «STEWING» button (22) illumination will glow constantly, the digital symbols «HEAt» will appear on the display (3), and after the set temperature is reached the «STEWING» cooking program will start, the display (3) will show the remaining operation time digital symbols.
During the program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «STEWING» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry.

«BAKING» program (19)

Note:

the «DELAYED START» function is not available for the «BAKING» program;
do not open the lid (6) during the «BAKING» program operation.
Pour some vegetable oil into the bowl (7) and smear it over the inner surface of the bowl (7), it is desirable to add some breadcrumbs on the inner surface of the bowl (7).
Put the prepared dough (see The Recipe book) into the bowl (7), do not exceed 1/2 of the maximal capacity of the bowl (7).
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Plug the power cord into the mains socket, you will hear a sound signal, the display (3) will show the sleep mode symbols «- – – -».
Press the button (19) «BAKING», the button (19) illumination will be flashing, and the default time «0:45» will be shown on the display.
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
Switch the cooking program on by pressing the button (10) «START/STOP», the «BAKING» button (19) illumination will glow constantly.
The remaining operation time digital symbols will appear on the display (3).
During the «BAKING» program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «BAKING» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.

Note: to avoid scorching the ready product switch the keep warm function off after «Baking» program ending.

Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry

BOILING/STEAM COOKING» cooking program (21)

Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Fill the bowl (7) with water, do not exceed 1/2 of the maximal capacity of the bowl (7).
Put the required ingredients into the steam rack (27) (see the Recipe book), install the steam rack (27) into the bowl (7).
Close the lid (6) until the lock clicks.
Insert the power plug into the mains socket. You will hear a sound signal, the sleep mode symbols «- – – -» will be shown on the display (3).
Press the «BOILING/STEAM COOKING» cooking program button (21), the button (13) illumination will be flashing and the default cooking time «0:30» will be shown on the display (3).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
If necessary, press the button (24) «DELAYED START» and set the necessary delayed start time with the buttons (16 – 17) (see the table «COOKING PROGRAMS»).

Note: if you set the «DELAYED START» program, then after the multicooker is switched on the digital symbols of the delayed start time will appear on the display (3). After the delayed start time is over, the «BOILING/STEAM COOKING» cooking program will start.

Switch the cooking program on by pressing the button (10) «START/STOP», the «BOILING/ STEAM COOKING» button (21) will glow constantly.
During heating the symbols «HEAt» will be shown on the display (3), after the preset temperature is reached, the flashing symbols «Add» will appear on the display (3) and you will hear sound signals, if the symbols «Add» appear on the display (3), carefully open the lid (6) and make sure that there is water in the bowl (7).
After some time the «BOILING/STEAM COOKING» program will be switched on and the remaining operation time digital symbols will appear on the display (3).
During the «BOILING/STEAM COOKING» program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «BOILING/STEAM COOKING» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.– Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the steam rack (27) from the bowl (7) using the potholders.
Remove the cooked products from the steam rack (27).
Remove the bowl (7) from the multicooker using the potholders.
Wait until the bowl (7) cools down, drain the remaining water, wash the bowl (7) with warm water and neutral detergent, rinse and dry

«BABY MENU» cooking program (23)
Note: the «DELAYED START» function is not available for the «BABY MENU» program;

Put the ingredients into the bowl (7) following the baby food recipe and add the required amount of water or milk.
Install the bowl (7) in the process chamber. Make sure that the outer surface of the bowl is clean and dry, and the bowl itself is placed evenly and is in secure contact with the heating element surface.
Close the lid (6) until the lock clicks.
Insert the power plug into the mains socket. You will hear a sound signal, the sleep mode symbols «- – – -» will be shown on the display (3).
Press the «BABY MENU» cooking program button (23), the button (23) illumination will be flashing and the default cooking time «0:30» will be shown on the display (3).
If necessary, set different cooking time (see the table «COOKING PROGRAMS») with the buttons (16-17), the set cooking time will be shown on the display (3).
Switch the cooking program on by pressing the button (10) «START/STOP», the «BABY MENU» button (23) illumination will glow constantly.
During the program operation the remaining operation time digital symbols will be shown on the display (3).
During the «BABY MENU’» program operation the hot steam will be released from the steam valve (5) openings, be careful to avoid burns.
After the «BABY MENU» cooking program is finished you will hear sound signals, the multicooker will be switched to the keep warm mode, the «KEEP WARM» button (11) illumination will light up, the display (3) will show the digital symbols of the operation time in the keep warm mode.
Switch the multicooker off by pressing the button (10) «START/STOP», the multicooker will switch to the sleep mode, the symbols «- – – -» will appear on the display (3). Unplug the unit.
Press the button (4) and open the multicooker lid (6) upwards, be careful to avoid getting burns by the outgoing steam.
Remove the bowl (7) from the multicooker using the potholders.
Remove the cooked products from the bowl (7).
Wait until the bowl (7) cools down, wash it with warm water and neutral detergent, rinse and dry

CLEANING AND CARE

Unplug the unit and let it cool down.

Remove the steam valve (5) grid turning it clockwise.
Wash the steam valve grid and install it back to its place turning it counterclockwise.
Clean the unit body (1) and lid (6) with a slightly damp cloth, and then wipe dry.
Wash all removable parts with a soft sponge and neutral detergent, then rinse under running water and dry.
Do not place the bowl (7) in a dishwashing machine.
Wipe the surface of the heating element (only when it is cold) with a soft dry cloth, do not allow water to get inside the multicooker body.
Do not immerse the multicooker body, the power cord and the power plug into water or other liquids.
Do not use abrasive and aggressive detergents or solvents for cleaning the multicooker and the accessories.

STORAGE

Unplug the unit and clean it.
Keep the unit in a dry cool place away from children and disabled persons.

DELIVERY SET

Multicooker – 1 pc.
Bowl – 1 pc.
Steam rack – 1 pc.
Spatula – 1 pc.
Measuring cup – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated power: 800 W
Bowl capacity: 4 L

The manufacturer reserves the right to change the unit specifications without a preliminary notification.

RECYCLING

For environment protection do not throw out the unit and the batteries with usual household waste after its service life expiration; apply to the specialized center for further recycling. The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner. For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.

Guarantee
Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

A production date of the item is indicated in the serial number on the technical data plate. A serial number is an eleven-unit number, with the first four figures indicating the production date. For example, serial number 0606ххххххх means that the item was manufactured in June (the sixth month) 2006.