PANGEA AUDIO Pico Sorbothane Feet Instructions
- June 9, 2024
- PANGEA AUDIO
Table of Contents
Pico Sorbothane Feet
Sorbothane is one amazing material. NASA used it to isolate high-speed cameras during Space Shuttle launches. Our National Park Service used it to protect the Liberty Bell from street vibrations. And professional athletes use it in their shoes to protect their bones and joints.
Pangea Audio Pico Feet have been carefully designed to enhance the performance of source components like CD players, Blu-ray players, tuners, phono stages, DACs, and line level preamps. They isolate components from performance- degrading mechanical vibrations inside the components and outside in the room.
One set of four Pico Feet supports gear weighing up to 40 lbs. For heavier gear, use Pangea Audio Mega Feet.
Recommended Use
For best results, place the bottom of the foot directly under the bottom of the component’s chassis with the “P” on top of the foot facing downward. Avoid placing the foot under a component’s own feet. Do not apply more than the recommended weight. Do not apply excessive heat. Do not use in direct sunlight. Do not place the foot directly on fine wood or other finishes, rather, place the supplied plastic discs under the feet to protect the surface.
Guarantee
Pangea Pico Feet are guaranteed to be free from manufacturing defects for a period of one year from their retail purchase date. This guarantee is void if the feet are damaged, marred or not used as recommended.
Care
Clean the feet by hand with lukewarm tap water and allow to air dry.
Pico Sorbothane Feet
Set of 4 supports up to 40 lbs
Distributed by WS Distributing, LLC – wsdistributing.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>