GOJU P10 Magnetic Wireless Power Bank Instruction Manual
- June 12, 2024
- GOJU
Table of Contents
GOJU P10 Magnetic Wireless Power Bank
Product Information
The device described in this user manual complies with Part 15 of the FCC Rules. It is a Class B digital device that has been tested and found to comply with the labeling requirements and limits for a Class B digital device. The device is designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and uses radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. While efforts have been made to minimize interference, there is no guarantee that interference will not occur in a particular installation. The device should not cause harmful interference and must accept any interference received, including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to take measures to correct the interference. The device should be installed and operated with a minimum distance of 0cm between the radiator and the user’s body. Third-party belt- clips, holsters, and similar accessories used with this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Only use the supplied or an approved antenna.
Product Usage Instructions
1. Ensure that the device is used in accordance with the instructions provided in this user manual.
2. To avoid harmful interference to radio or television reception, if you experience such interference, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
3. The device should be installed and operated with a minimum distance of 0cm between the radiator and the user’s body.
4. Do not use third-party belt clips, holsters, or similar accessories that contain metallic components with this device. Such accessories may not comply with RF exposure requirements.
5. Only use the supplied or approved antenna with the device.
Overview
INSTRUCTION FOR USE
-
.To charge your device, put your phone on the PIO Wireless Charger to automatically charge your phone (only for compatible-Qi devices)
-
To charge PIO: connect the USB-C port to the power adapter.
The LED will gradually flash white to indicate that charging is in progress. When the 4 LEDs are all white, it means charging is completed. Please disconnect the PIO from the power adaptor. -
PIO discharging: plug the cable into LJSB-C port then automatically wake up and turn on the output.
The white LED always on, indicating that the discharge is in progress. When 1 LED flashes, it
| lndlc.itor | Status |
|---|
1 LED ON in blue
| Wireless Charging Mode is ON
4 LED ON| Battery Level > 75%
3 LED ON| Battery Level >50%
2 LED ON| Battery Level > 25%
1 LED ON| Battery Level > 10%
<,
, LED Flashing| Battery Level Oo/o
Indicator| Status
---|---
1 LED flashes blue| FOO detects(pls remove it)
1 LED In green on| Fa<u charge-discharge
SPECIFICATION
- Capacity : 5000rnAh 3.85V(18.5Wh)
- Rated Capacity: 2800mAh
- USB-C Input: 5V-3A/9V-2.2A(MAX)
- USB-C Output: 5V-3A/9V-2.2A(MAX)
- Wireless Output: 5V-1A/9V-1.2A(10W MAX.)
- Size: 1086.58.35mm
Packing Content:
- PIO Magnetic Wireless Power Bank
- Cable USB-C
- Manual And Warranty Card
WARNING
- DO not disassemble or modify this product by yourself;
- Do not store this product in a humid environment;
- Do not place the product near a heat source or charge it near a heat source
- Do not let water or other liquids flow into the interface of this product, causing damage to this product
- 1f the battery of this product swells, please stop charging or use
- When charging, please be sure to remove metal, magnetic protective casings or cards (such as bank cards, etc.) from your device
- When charging, heat may be generated, which is normal and will not affect product performance. However, if you feel that the phone or product is overheated, please disconnect the power supply, wait for it to cool down, and try to charge again
- Avoid to use curved or damaged USB cable;
How to Dispose Waste Electronics
- DO not dispose electronics as household waste
- Please dispose waste electronic products according to local regulations
- GOJU encourages you to actively participate in electronics recycling programs
WARRANTY TERMS
- Within 12 months from the date of purchase, if the product is damaged or faulty, it is confirmed by the company’s technician that it has occurred under normal use, and the company will provide free maintenance services
- The warranty card and the original invoice must be presented during maintenance. If the user cannot provide it, the company has the right not to provide maintenance services. Users may need to pay for related maintenance costs
- During the warranty period, the product warranty will be automatically invalidated if the following terms appear: (a) any part of the product is deliberately disassembled or repaired by our company: (b) wrong operations such as: illegal power supply connection and water, dirt Penetrate into the product and cause damage to the product; (c) Product damage caused by irresistible I nts or natural disaster.
- If the warranty card is altered, the warranty card will automatically become invalid
- The company reserves the right to add or delete any maintenance and warranty terms without notice
- The company will not be responsible for any damage to mobile phones or other electronic products caused by the wrong use of the company’s product
- For the compatibility of GOJI-J original products and your mobile phone or electronic products, please confirm with the dealer at the time of purchase. Specifications of this product are subject to change without notice
- Schedule of Toxic and Hazardous Substances or Elements
- O: Indicates that the harmful and toxic substance is contained in all the parts
- X: Indicates that the content of the harmful and toxic substance in at least the material of the part is in a homogeneous material specified in GBIT 26572, and the content exceeds the standard specified in GBIT Limit requirements The following limit requirements stipulated in the 26572 standard
- X: Indicates that the content of the harmful and toxic substance in at least the material of the part is in a homogeneous material specified in GBIT 26572, and the content exceeds the standard specified in GBIT Limit requirements The following limit requirements stipulated in the 26572 standard
Note: The reason why this product is marked with an is that there are no alternative technologies or components available at this stage
FCCWarning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: -Reorient or relocate the receiving antenna. -Increase the
separation between the equipment and receiver. -Connect the equipment into an
outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure
Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 0cm between the radiator and your body.
IC Warning
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions: (1)This device may not cause
interference; (2) This device must accept any interference, including
interference that may cause undesired operation of the device. conformed aux
CNR Canada The information listed above provides the user with the information
needed to make him or her aware of a RF exposure, and what to do to assure
that this radio operates within the FCC exposure limits of this radio. The
device complies with RF specifications when the device used at 0cm from the
body. Third-party belt clips, holsters, and similar accessories used by this
device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the supplied or
approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>