ZALMAN N5 OF ATX MID Tower Computer Case User Manual

: June 4, 2024
: ZALMAN

ZALMAN N5 OF ATX MID Tower Computer Case User Manual

To ensure safe and easy installation, please read the following precaution.

Product design and specifications may be revised to improve quality and performance without notice.

www.zalman.com

Precautions

Read this manual carefully before installing.
Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
Wear gloves to prevent accidents when installing the product.
Severe damage may occur when mounting the system, so do not apply excessive force.
Connecting the cable incorrectly may cause a fire due to a short circuit.
Make sure to refer to the manual when connecting the cable.
Be careful not to block the ventilation hole of the product when using the system.
Avoid locations with direct sunlight, water, moisture, oil, and excessive dust.
Store and use the product in a well-ventilated location.
Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
Do not insert your hand or other object into the product during operation, as this may injure your hand or damage the object.
Store and use the product out of children’s reach.
Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
The exterior design and specifications of the product are

Specifications

Model	N5 OF
Case Form Factor	ATX Mid-Tower
Dimensions	437(D) x 200(W) x 450(H)mm
Weight	3.6kg
Case Materials	Plastic, Steel
Motherboard Support	ATX / mATX / Mini-ITX
Maximum VGA Length	365mm
Maximum CPU Cooler Height	158mm
Maximum PSU Length	160mm
PCI Expansion Slots	7
Drive Bays	2 x Combo(3.5” or 2.5”), 4 x 2.5” SSD, 1 x 5.25 ODD
Fan Support	Top
Front	2 x 120mm
Rear	1 x 120mm
Bottom	2 x 120mm
Fan(s) Inclued	Front
Rear	1 x 120mm (with White LED Effect)
Radiator Support	Front
Rear	120mm
I/O Ports	1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, Reset Button,

Power Button, Fan-LED Controller (Change Fan Speed & LED Brightness)

Specifications

Accessories

User’s Manual

Buzzer

Cable Ties x 5

Thumm Screws x 2

SSD / MB Screws x 20

PSU / HDD / VGA Screws x 8

Motherboard Standoffs x 3

I/O Ports

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
ⓐ| Power Button| ⓑ| Fan Controller| ⓒ| HDD / Power LED| ⓓ| Headphone Jack
ⓔ| Microphone Jack| ⓕ| USB 2.0 Ports| ⓖ| USB 3.0 Port| ⓗ| Reset Button

Removing the side panels

Acrylic Panel
Steel Panel

Removing the front panel

Mounting the motherboard

Motherboard size

※ Pick out the 8-Pin auxiliary power cable(CPU power connector) through the groove on top before installing motherboard.

ATX
mATX
Mini-ITX

Mounting the PSU

Mounting the PCI-E(VGA) card

$Mounting the PCI-E$VGA$ card$

Mounting the 3.5″ and 2.5″ SSD / HDD

HDD

HDD Screws

SSD

SSD / MB Screws

Mounting

Mounting the 2.5″ SSD / HDD

Mounting the 2.5" SSD / HDD

Mounting the fans

Mounting the top fans
Mounting the bottom fans

Fan(s) Included

Front : 2 x 120mm Fan
- with White LED Effects
  $Fan$s$ Included$
Rear : 1 x 120mm Fan
- with White LED Effects
  $Fan$s$ Included$

Fan Controller

4 Control Modes of Fan speed & LED brightness

Mode	Fan Speed	LED Brightness
Mode 1.	High	High
Mode 2.	Low	Low
Mode 3.	Low	Off
Mode 4.	Off	Off

※ Caution: shutting off your system fans could cause increase of system temperature.

I/O Connectors

Product Warranty

product name

| |

model name

|
---|---|---|---

date of purchase

| Year//Month//Day| Serial No.|

Where to buy

| |

sale price

|

Quality warranty period: 1 year from the date of purchase. (However, when there is a purchase receipt)
Free A/S: In case of defects or defects in the product’s own performance within the warranty period.
Paid A/S: When a problem occurs in using the product after the warranty period. However, free A/S processing is not available for the following matters even within the warranty period. It is handled at the consumer’s expense.
If you do not follow the precautions and precautions before installation specified in this user manual.
In case of deformation, damage/destruction due to the user’s intention, negligence or negligence.
In case of deformation or malfunction due to user’s arbitrary modification.
When the quality assurance sticker is removed or damaged.
In case of malfunction due to natural disaster.
In case of malfunction due to use in an abnormally humid environment or a space with a lot of dust and other foreign substances (worms, etc.).
Parts retention period: 2 years from the date of product discontinuation (However, the time of discontinuation is based on the final shipment date of the discontinued product.)
A/S information
Operating Hours: Weekdays 10:00 ~ 16:00 (Closed on holidays, Saturdays and Sundays)
How to apply
Visit to: Visit www.zalmansvc.com and register for service
Delivery by courier: After accessing www.zalmansvc.com and registering as a member, receive service application after entering your name, contact information and symptoms courier delivery prepaid
Reception desk ※ After checking the exact location and address of the A/S center on the website, visit or send by courier.
Product transportation cost
In case of initial defect: In case of initial defect, the round-trip fare will be borne by us.
In case of free A/S: In principle, the cost of courier delivery within the free period shall be borne by the customer once (prepaid).
Paid A/S and after warranty period: All round-trip costs are borne by the customer.
How to check the date of manufacture