ZALMAN CNPS17X High Performance CPU Cooler with 4D Patented Corrugated FIN Design User Manual
- October 27, 2023
- ZALMAN
Table of Contents
High Performance CPU Cooler with 4D Patented Corrugated FIN Design
User Manual
CNPS17X High Performance CPU Cooler with 4D Patented Corrugated FIN
Design
Latest Intel & AMD Compatible
Intel Socket LGA2066/2011-V3/2011/115X CPUs
AMD Socket AM4/AM3+/AM3 CPUs
Developed and designed by ZALMAN in Korea.
This product is protected by ZALMAN’s pending or registered patents
- To ensure safe and easy installation, please read the following precaution.
- Product design and specifications may be revised to improve quality and performance without notice.
Precautions
- Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
- Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
- To prevent possible injuries, gloves must be worn while handling this product.
- Excessive force exerted on the fan may cause damage to the fan and/or system.
- Use and keep product away from reach of children.
- Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
- Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
- Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
- During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
- Product design and specifications may be changed to improve quality and performance without notice.
Specifications
| Model | CNPS17X |
|---|---|
| Materials | Pure Copper, Pure Aluminum |
| Dimensions | 140(L) x 100(W) x 160(H)mm |
| Weight | 700g |
| Heat Dissipation Area | 6,243㎠ |
| Fan(s) | Dimensions |
| Bearing Type | FDB(Fluid Dynamic Bearing) |
| Fan Speed | 800~1,500 RPM ±10% |
| Max Noise Level | 29 dB(A) ±10% |
| Max Airflow | 61 CFM |
| Max Air Pressure | 1.1mmH2O |
| Rated Voltage | 12 V DC |
Thermal Compound
(ZM-STC8)| Capacity| 1.5g
Temperature Range| -40℃ ~ +150℃ (-40℉ ~ +302℉)
Components
INTEL, AMD Backplate
Caution
Please check the proper ZALMAN logo direction on backplate for each Intel and
AMD socket.
No backplate is necessary for Intel LGA 2066 /2011-V/2011 socket.
Caution
Take note of the orientation of the nuts and the side caps.
INTEL, AMD Loading Block
Caution
Remove the tape cover of loading block and attach it to the backplate.
- Intel Users
- LGA2066 / 2011-V3 / 2011
Caution
Backplate is not needed for LGA2066 / 2011-V3 / 2011 sockets.
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please install Fan in the center of the heat sink for maximum performance in case of no interference of RAM.
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please install Fan in the center of the heat sink for maximum performance in case of no interference of RAM.
- AMD Users
- AM3 / AM4
Caution
Please be cautious for the direction of AMD Guide installation.
Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Caution
Please install Fan in the center of the heat sink for maximum performance in case of no interference of RAM.
- Cable Connection
- Connection to other motherboards
- Connection to Gigabyte motherboards
- Fan Specifications
Dimensions| 140 x 140 x 26(H)mm
---|---
Speed| 800 ~ 1,500 ±10% RPM
Max Noise Level| 29 dB(A) ±10%
Bearing Type| FDB (Fluid Dynamic Bearing)
Max Airflow| 61 CFM ±10%
Pin Connector| 4-Pin (PWM), 3-Pin (Addressable)
Rated Voltage| 5~12 V DC
Certification
This mark, designed by Zalman, indicates product compliance with the European
Union’s RoHS (Restriction of Hazardous Substances) Directive.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems)
COOL INNOVATIONS
www.zalman.comhttps://tm.by
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>