ZALMAN CNPS16X BLACK RGB CPU Cooler User Manual

ZALMAN CNPS16X BLACK RGB CPU Cooler User Manual

Precautions

• Avoid tempering with objects or hands into the fan while it is in operation to prevent product damage and injuries.
• Do not eat the thermal grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If irritation persists, seek medical attention.
• To prevent possible injuries, gloves must be worn while handling this product.
• Excessive force exerted on the fan may cause damage to the fan and/or system.
• Use and keep product away from reach of children.
• Check the components list and condition of the product before installation. If any problem is found, contact the retailer to obtain a replacement.
• Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated purposes and/or the carelessness of the consumer.
• Zalman Tech Co., Ltd. Is not responsible for any damages due to overclocking CPU such as, CPU and system components.
• During transportation of the system, the cooler must be removed. Zalman Tech Co., Ltd. is not responsible for any damages that occur during the transport of a system.
• Product design and specifications may be changed to improve quality and performance without notice.

Specifications

Components

INTEL, AMD Backplate

1. Nuts Position
   
   Caution
   Please check the proper ZALMAN logo direction on backplate for each Intel and AMD socket.
   No backplate is necessary for Intel LGA2066/2011-V/2011 socket.

2. 115X
   
   

3. AM3
   
   
   Caution
   Take note of the orientation of the nuts and the side caps.
   

INTEL, AMD Loading Block

1. Intel
   

2. AMD
   

Caution
Remove the tape cover of loading block and attach it to the backplate.

Intel Users

1. LGA2066 / 2011-V3 / 2011
   
   Caution
   ** Backplate is not needed for LGA2066 / 2011-V3 / 2011 sockets.
   
   
   Caution
   Screw-in both bolts in an alternating fashion until they are completely tightened.
   Detail Image
   
   
   
   Caution
   ** Please check the direction of the fan before installation.

Caution
Be sure to connet ⑤ with ③.
※ Placing ⑤ on ①, ② or ④ could cause malfunction & damage the product.

2. LGA115X
   
   
   
   Caution
   Screw-in both bolts in an alternating fashion until they are completely tightened.
   Detail Image
   
   

Caution
Please check the direction of the fan before installation.

Caution
Be sure to connet ⑤ with ③.
※ Placing ⑤ on ①, ② or ④ could cause malfunction & damage the product.

AMD Users

1. AM3 / AM4
   

Caution
Please be cautious for the direction of AMD Guide installation.


Caution
Screw-in both bolts in an alternating fashion until they are completely tightened.
Detail Image

Caution
Please check the direction of the fan before installation

Caution
Be sure to connet ⑤ with ③.
※ Placing ⑤ on ①, ② or ④ could cause malfunction & damage the product.

Installation Guide

1. Top LED Cover (Install)

2. Top LED Cover (Dismantle)
   

Caution

• Please be sure to check the RGB pins and its connector before installation.
• Please align RGB pins vertically to its connector during installation. (Pins can be bent if your alignment off).

1. Fan + Guide (Install)
   

2. Fan + Guide (Dismantle)
   

Caution

• Installation: align the fan guide on one side of the heatsink and lift the other side and slide it in.
• Dismantle: Lift the fan guide’s side cover and pull it carefully.

Cable Connection

1. Connection to other motherboards
   
   

2. Connection to Gigabyte motherboards
   
   

Fan Specifications

• Model : LF120

• Dimensions : 120 x 120 x 26(H)mm

• Fan Speed : 800 ~ 1,500 ±10% RPM

• Max Noise Level: 27 dB(A) ±10%

• Bearing Type: EBR Bearing

• Max Airflow: 49 CFM ±10%

• Max Air Pressure: 1.21mmH2O

• Pin Connector: 4-Pin (PWM), 3-Pin (Addressable)

• Rated Voltage: 5~12 V DC

• Life Span: 50,000 hours

• Model: LF120 (Reverse)

• Dimensions: 120 x 120 x 26(H)mm

• Fan Speed: 800 ~ 1,500 ±10% RPM

• Max Noise Level: 27 dB(A) ±10%

• Bearing Type: EBR Bearing

• Max Airflow: 49 CFM ±10%

• Max Air Pressure: 1.21mmH2O

• Pin Connector: 4-Pin (PWM), 3-Pin (Addressable)

• Rated Voltage: 5~12 V DC

• Life Span: 50,000 hours

This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)

QR Code:

www.zalman.com

References

• zalman.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>