ZALMAN S2, S2 KOR, S2 TG ATX MID Tower Computer Case

Precautions

• Read this manual carefully before installing.
• Check the product and components before installing. If you find any abnormality, contact the location where you purchased the product for a replacement or refund.
• Wear gloves to prevent accidents when installing the product.
• Severe damage may occur when mounting the system, so do not apply excessive force.
• Connecting the cable incorrectly may cause a fire due to a short circuit. Make sure to refer to the manual when connecting the cable.
• Be careful not to block the ventilation hole of the product when using the system.
• Avoid locations with direct sunlight, water, moisture, oil, and excessive dust. Store and use the product in a well-ventilated location.
• Do not wipe the surface of the product using chemicals. (organic solvents such as alcohol or acetone)
• Do not insert your hand or another object into the product during operation, as this may injure your hand or damage the object. Store and use the product out of children’s reach.
• Our company assumes no responsibility for any problem that occurs due to the use of the product for purposes other than its designated pur poses and/or the carelessness of the consumer
• The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.

TECHNICAL SPECIFICATION

DIMENSION

I/O Port

| Part| #| Part| #| Part| #| Part

---|---|---|---|---|---|---|---
A| Power button| B| Microphone jack| C| Headphone jack| D| USB 2.0
E| USB 3.0| F| Reset button| G| Power LED| H| HDD LED

Components

• Manual
• PCI slot cover x 2
• cable connection x 5
• USB rubber cover x 3
• Media rubber cap x 2

• HDD Screws x 8
• SSD / MB Screws x 18
• PSU / VGA
• Motherboard Stand-off x 3
• fan screw x 8

Separating the side panel

Side Panel Removal

Mounting the motherboard

As 6 stand-offs are mounted by default, insert an additional stand-off according to the type of motherboard by referring to the mounting position of the main board, and mount the motherboard on the case.

Mounting the 3.5” and 2.5” SSD / HDD

• Separate the 2.5” and 3.5” combo HDD guide and assemble the HDD or SSD. Mount the assembled HDD on the slot.

Mounting 2.5” SSD / HDD

• 2.5″ SSD and HDD can be installed on the right side of case as shown in the diagram.

Mounting PCI-E(VGA) card

• Loosen the screw, separate the PCI cover, mount the graphic card, and fix it using the screw.

Mounting the top fan

• As shown in the picture, install the fan on the top of the case using bolts

Mounting the bottom fan

Mounting the front fan and front radiator

After Front Cover Removal and Mount the fan or the radiator on the mount hole in the front as shown in the figure. (For liquid-coolers, only products with a hose length of 240 mm or more can be installed)

Mounting the front fan

Mounting the front radiator

Cable Connection

Warranty

1. Quality guarantee period: 1 year from the date of manufacture. (However, 1 year from the date of product purchase when proof of purchase receipt is provided)

2. Free A/S: In the event of defects or defects in the performance of the product itself within the quality guarantee period.

3. Paid A/S: In case of product use problems after the quality guarantee period. However, free A/S is not provided for the following items even within the quality guarantee period. It is processed at the consumer’s expense.

4. If the precautions and precautions before installation specified in this user manual are not followed.

5. In case the product is deformed, damaged or destroyed due to the user’s intention, negligence or negligence.

6. In case of deformation or failure due to user’s arbitrary modification.

7. In case the quality assurance sticker is removed or damaged.

8. In case of failure due to natural disasters.

9. Product Exchange

10. Exchange and repair: From the date of manufacture of the product to within the warranty period, in case of defects or defects in the performance of the product itself.

11. Within 14 days from the date of purchase – 1:1 exchange for a new product. (when proving components and purchase statements)

12. Within the warranty period – Free exchange and free repair.

13. After the warranty period – Paid exchange and paid repair.

14. Parts Retention Period

15. 2 years from the date of product discontinuation. (However, the time of discontinuation is based on the final shipment date of the discontinued product.)

16. A/S information

17. Operating Hours

18. Center operating hours 10:00~17:00 (Closed on weekends and holidays)

19. Consultation Hours 10:00~16:00 2) How to apply

20. In-person application: Access to www.zalmansvc.com, register as a member, and apply for A/S.

21. • Please visit us after bringing the products you have applied for.

22. Courier Reception: Access www.zalmansvc.com and apply for A/S after signing up as a member

    * Please provide your address, name, phone number, and symptoms accurately before delivery. (Please check [www.zalmansvc.com](http://www.zalmansvc.com) for the service center address.)

7. Transportation costs
8. In case of initial defect: In case of initial defect, we will bear the round-trip freight.
9. In the case of free A/S: The delivery fee within the free period is borne by the customer once (prepaid).
10. Paid A/S and after the warranty period: All round-trip costs are borne by the customer.

www.zalman.com

References

• zalman.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>