ORION CHDC-22SDC HD CCTV Camera Installation Guide

ORION CHDC-22SDC HD CCTV Camera

Product Information

• Specifications
  • Model: CH DC-2 2 SDC / CH DC-2 2 SDH SC HD CCTV CAMERA
  • Image Sensor: 1/2.5 PRIMARY COLOR CMOS HIGH SENSITIVE DAY/NIGHT HD CCTV
  • Website: http://www.orionimages.com.

Product Usage Instructions

• Handling Precautions
  • Before using the camera, it is important to follow these handling precautions:
  • Do not open the camera case as there are precision electrical and electronic components inside that may be adversely affected or cause the camera to malfunction.
  • Avoid putting anything metallic or other foreign substances through the vent to prevent the risk of fire or electric shock.
  • Always turn off the power before installing or making connections.
  • Avoid installing the camera in places exposed to heat, vibrations, and shock.
  • Take care not to drop or give a strong shock to the camera while transporting it.
  • Do not touch the image sensor.
  • Avoid orientating the camera directly towards the sun.
  • In adverse light conditions, certain types of lenses may hunt. Refer to the manual for instructions on re-adjusting the lens.
  • Note that images may look unnatural at high resolutions due to the characteristics of the digital image device.
• Frequently Asked Questions (FAQ)
  • Q: Can I open the camera case?
  • A: No, opening the camera case can damage the precision electrical and electronic components inside. It is recommended not to open the case.
  • Q: What should I do if the camera is exposed to heat or vibrations?
  • A: Avoid installing the camera in places exposed to heat, vibrations, and shock. This can affect the performance and functionality of the camera. Choose a suitable location for installation.
  • Q: How should I transport the camera?
  • A: When transporting the camera, take care not to drop it or give it a strong shock. Handle it with care to prevent any damage.

THANK YOU FOR CHOOSING ORION

• Thank you for choosing ORION Images’ high-quality HD CCTV Camera.
• Please read this instruction manual carefully to keep your ORION Images product at peak performance for a longer service duration.
• All ORION Images products are designed and manufactured with utmost care and craftsmanship to provide long life and high-quality performance if it is properly used and maintained as outlined in this manual.
• This high-performance HD CCTV camera is equipped with a 1/2.5” 2.2M CMOS sensor, which has an extremely wide range of uses in many different applications and conditions.

Introduction

CAUTION

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

NOTE:

• This equipment has been tested and found to comply with the limits for a Class A digital device.
• Under Part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communication.
• However, there is no guarantee that interference will not occur in a particular installation.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures.

CAUTION:

• ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Instructions for Disposal of Electrical and Electronic Equipment in Private Households

• Disposal of used Electric and Electronic Equipment (Applicable in the European Union and other European countries with waste recycling, disposal, and collection regulations)
• This symbol on the product, or in the related documents in the package, indicates that this product shall not be treated as normal household waste.
• Instead, it should be taken to a proper applicable collection point or depot for the recycling of electrical and electronic equipment.
• By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for the environment and human health which could otherwise caused by inappropriate handling of this product.
• The correct recycling of materials will help to conserve natural resources.
• For more detailed information about recycling this product, please contact your local city authority, your household waste disposal service, or the place where you purchased the product.

HANDLING PRECAUTIONS

• Do not install the camera in a water-splashed or highly humid environment.
• Do not use the camera where the ambient temperature drops below 0° C or rises above +50° C. The images and parts may be adversely affected or the camera may not function correctly.
• Never open the camera case because there are precision electrical and electronic components inside and an accident may result.
• Do not put anything metallic or any other foreign substances through the vent, as a fire or electric shock may result.
• Be sure to turn off the power before installing or making connections.
• Do not install the camera in places exposed to heat, vibrations, and shock.
• Be careful not to drop or give a strong shock to the camera while transporting it.
• Do not touch the image sensor.
• Do not orientate the camera directly towards the sun.
• Some types of lenses may hunt in adverse light conditions. In such cases please re-adjust the lens in line with the instructions in the manual.
• Because of the characteristics of the digital image device, images may look unnatural at high temperatures, but this does not mean the camera is faulty.

GENERAL

• This HD CCTV Camera is provided with a High-performance 1/2.5 inch 2.2M CMOS sensor.
• The camera features a built-in optical 10x zoom lens (1/3.6” f=4.5~45.0mm, f1.8~2.2) high resolution, and is equipped with digital DAY/NIGHT function, intelligent backlight compensation by which you can achieve proper Back Light Compensation, Crystal controlled internal sync lock system, Various modes of convenient Automatic while balancing, mirror image, camera setup and control is also possible locally using a remote controller, or remote via RS-232C and this setup data is stored in the built-in non-volatile memory.
• The camera is best suited for HD CCTV surveillance purposes, from single-camera operation to large-scale integrated systems for visual information management.

PACKAGE OF CONTENT

FEATURES

1. HD-SDI OUTPUT
   • This camera outputs an HD-SDI signal featuring resolutions of 1080/25p, 30p, 50i, 60i or 720/30p, 50p, 60p SMPTE 292M standard.
2. MULTI OUTPUT MODEL (CHDC-22SDHSC)
   • It has outputs of HD-SDI, Composite, S-Video, HDMI, and YPbPr Component.
3. NTSC / PAL OUTPUT
   • This output can be used for a test or an adjustment.
4. DAY / NIGHT FUNCTION
   • This camera delivers high-quality color images during the day.
   • As light diminishes below a certain level, the camera can automatically switch to night mode to make use of near-infrared (IR) light to deliver high-quality, black-and-white images.
5. BACK LIGHT COMPENSATION
   • Well-designed BLC, backlight compensation, the facility is provided which can assign a compensation area for backlight compensation to have an optimum balanced clear picture reproduction.
6. DIGITAL EFFECT FUNCTION
   • This output video can be selected in either normal, negative, solarization, pasteurization, or sephia, monochrome.
7. AUTOMATIC OR MANUAL WHITE BALANCE
   • In addition to the Auto white balance, this camera provides manual adjustment of x-value / yvalue.
8. AUTO SLOW SHUTTER
   • ON / OFF is provided
9. MIRROR IMAGE
   • This flips the image horizontally or vertically.

NAMES OF PARTS AND FUNCTIONS

1. BUILT-IN ZOOM LENS
   • This is an optical 10X zoom lens built in. 1/3.6” F=4.5~45mm, F1.8 ~ 2.2
2. CAMERA MOUNT
   • These holes are for the camera mount plate enclosed and provided in both the top and bottom of the camera body.
3. COMPONENT VIDEO (CHDC-22SDHSC ONLY)
   • These three RCA connectors are for analog Y, Pb, and Pr components.
4. NO CONNECTION
5. S-VIDEO OUT (CHDC-22SDHSC ONLY)
   • This is the S-Video output.
6. HDMI OUT (CHDC-22SDHSC ONLY)
   • This is HDMI output.
7. MULTI IN / OUT
   • This is a 9-pin multi-connect to use with a multi-port cable used for DC12V power and serial control.
8. CVBS OUT (CHDC-22SDHSC ONLY)
   • This is NTSC / PAL output (BNC)
9. VIDEO OUTPUT CONNECTOR (VIDEO OUT)
   • For HD-SDI output from the camera. Connect this output to an HDTV monitor or HDTV switcher, etc.
   • This is to be terminated with 75 ohms impedance at the last equipment in a loop when the cascade/bridge loop connection is made.

OPERATION

USER SETUP

• The camera has a remote controller as standard to set up and various picture quality setups, backlight compensation, and Day/Night for optimum reproduction.
• The SETUP can be easily executed using the On-Screen-Menu system.
• Alteration of these functions may be needed for some installations and we recommend that you spend some time to become acquainted with these functions so that the best results can be obtained from this high-performance HD CCTV camera.

SETUP SWITCHES AND FUNCTIONS

• Operation distance: 10M
• When RC is on: Flickering on LED
  • Cancel setup value and Exit setup mode
  • Enter & function key
  • Move to Up, Down, Left, Right
  • Brightness
  • Zoom In/Out
  • Resolution

ENTERING THE SETUP MODE AND ITS BASICS

Press the ENT button on a remote controller to display the following OSD menu on the screen.

1. VIDEO FORMAT
2. PICTURE CONTROL
3. BACKLIGHT
4. DIGITAL EFFECT
5. SCENE
6. FLICKERLESS
7. WHITE BALANCE
8. NOISE REDUCTION
9. AUTO SLOW SHUTTER
10. IMAGE STABILIZER
11. MIRROR
12. FOCUS MODE
13. OSD COLOR
14. OSD AUTO DISAPPEAR
15. SERIAL ID
16. RESET
17. EXIT

VIDEO FORMAT
Press the ENT button one time to move a cursor to the TV type. Press the ENT button one more time to move a cursor to NTSC. Press the button or button to select the format.

• TV-Type: This NTSC (default) or PAL to select
• Composite: SQUEEZE (16:9) default or crop (4:3)
• SYNC TRIG: This is for the sync trigger. This model does not support a trigger. Please stay at “OFF”
• First Field: Lower (default) or Upper

Resolution: Select HD Output format

• (In 1920 x 1080 / 30p) out 1920 x 1080 / 30p
• (In 1920 x 1080 / 30p) out 1920 x 1080 / 30p
• (In 1280 x 720 / 60p) out 1280 x 720 / 60p
• (In 1280 x 720 / 30p) out 1280 x 720 / 30p
• (In 1920 x 1080 / 25p) out 1920 x 1080 / 25p
• (In 1920 x 1080 / 25p) out 1920 x 1080 / 50i
• (In 1280 x 720 / 50p) out 1280 x 720 / 50p

PICTURE CONTROL
Press the ENT button to adjust the picture.

• Brightness: 0 ~ 100 (default is 66) higher number increases brightness.

• Sharpness: Low, Middle (default) or High.

• Hue:
  

  • Cr -> -2 ~ +2 (default is +1)
  • Cb -> -2 ~ +2 (default is +1)

• Chroma:

  • Low, Middle, or High (default is Low)
  • Cb -> Low, Middle or High (default is Low)

BACKLIGHT

• This is ON / OFF of Back Light Compensation.
• This should be ON when the object becomes dark due to the highlight background.

DIGITAL EFFECT

• You can select the image at Normal, Negative, Solarization, Pasteurization, Monochrome, or sepia color.

SCENE

• Due to your environmental scene, you may need to set up this function like MODE ODD, High color Temperature, WDR (Wide Dynamic Range), AUTO, Night (without Auto change) or Night (with Auto change – Day / Night)

FLICKERS

• If you see a flicker on the screen, please use this function and select ON, ON (50Hz fixed) or ON (60Hz fixed).

WHITE BALANCE

• You may select Manual, Auto, (Tungsten, Fluorescent D, Fluorescent N, Fluorescent W, Shade or Cloudy)
• When selecting “MANUAL”, you may need to select X/Y values.

NOISE REDUCTION

• You may select Low, Middle (default) or High.

AUTO SLOW SHUTTER

• It can be selected ON or OFF (default).

IMAGE STABILIZER

• It can be selected ON (default) or OFF.

MIRROR

• This function is to reverse top and bottom or left and right.

FOCUS MODE

• Auto or Manual can be selected.

OSD COLOR

• The color of the OSD menu (Title, Menu, Sub menu, or select) can be changed to WHITE, CYAN, MAZEN (Magenta), BLUE, YELLOW, GREEN RED, gray (Dark Gray), GRAY, DCYAN, (Dark Cyan), DMAZE (Dark Magenta), DBLUE (Dark Blue), DYELL (Dark Yellow), DGREEN (Dark Green), BLACK, TRANS (Transparency).

OSD AUTO DISAPPEAR

• You can select Disable or Enable for OSD auto disappear function

SERIAL ID

• You can set your ID (number 1 ~ 7) and Baud rate (default is 19200). Please visit http://www.orionimages.com/product/CHDC-22SDC.asp. to download a remote application software. (see figure 1.1 for the application menu)

RESET

• Select “YES” to go back all settings to factory default.

EXIT

• Select either “SAVE & EXIT” or “EXIT WITHOUT SAVING” your camera set up.

APPLICATION OF OUTPUT

SPECIFICATIONS

CHDC-22SDC & CHDC-22SDHSC

Image Sensor| 1/2.5” CMOS
Effective Pixel| 2.2 M Pixel
Sync System| Internal
Video Output| HD-SDI (SMPTE 294M) / 75 ohm BNC x 1
1920 x 1080 30p / 25p / 60i, 1280 x 720 60p / 50p
NTSC / PAL 1Vp-p / 75 ohm (CHDC-22SDHSC ONLY)
S-Video (CHDC-22SDHSC ONLY)
Y, Pb, Pr Component (CHDC-22SDHSC ONLY)
HDMI 1.3  (CHDC-22SDHSC ONLY)
Lens| 1/3.6”, F=4.5 ~ 45mm, F1.8 ~ 2.2
Minimum Illumination| 6 Lux (50 IRE)
Auto White Balance| Auto / Manual
Backlight Compensation| Built-In
Noise Reduction| Built-In
Auto Slow Shutter| Built-in / ON: 0.35 Lux
Image Stabilization| Built-In
Day & Night| Built-In
Mirror Image| Horizontal and Vertical
Power Requirement| DC 12V (Voltage Tolerance: 8V ~ 15V)
Power Consumption| Max 720mA
Operating Temperature| 32° ~ 113° F (0° ~ 45° C)
Operating Humidity| 20 ~ 80%
Camera Mount| 1/4” ~ 20UNC x 1 (Top or Bottom)
Dimensions (W x H x D)| 2.65” x 2.36” x 6.57”
Weight| 1.06 lbs

OUTLINE DIMENSION

Unit: mm

WARRANTY & AFTER-SALE SERVICE

• A warranty accompanies this product. Read and fill out the warranty card that you have received at your dealer. Keep this card in a safe place.
• Please consult ORION Images Corporation or your dealer for full warranty information.
• Your dealer will repair or replace free of charge within the warranty period according to the warranty coverage.
• For repairs after the expiration of the warranty period, consult your dealer or sales representative.
• It will first be judged whether the fault is repairable or not. Charged servicing will then be made upon request of the user.
• Before you ask for servicing, please ensure you read the instruction Manual.
• If the unit still fails, take note of the model number, date of purchase, problem, etc.
• In detail, and inform your dealer or sales representative.
• If you have questions about the after-sale service, contact your dealer or sales representative.
• We suggest you ask for a preventive inspection as soon as possible.

Contact

Contact ORION Images:
In the event of missing and/or damaged equipment, or technical questions, the following information can help in the completion of the installation.

• Address: 7300 Bolsa Avenue, Westminster, CA 92683
• Tel: 714-766-6300
• Fax: 714-766-6310
• Email: sales@orionimages.com.
• Website: http://www.orionimages.com.
• 7300 Bolsa Avenue,
• Westminster CA 92683
• Tel: 714-766-6300
• Fax: 714-766-6310

1/2.5” PRIMARY COLOR CMOS HIGH SENSITIVE DAY/NIGHT HD CCTV All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein http://www.orionimages.com.

References

• ORION Images
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>