COLBOR BL65 Collapsible Lantern Softbox User Manual

: June 9, 2024
: COLBOR

Table of Contents

Introduction
Caring For Your COLBOR Product
Installation Instructions
Package list
WARRANTY
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COLBOR BL65 Collapsible Lantern Softbox User Manual

Introduction

Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein.

Caring For Your COLBOR Product

Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
Do not leave the product unattended while in use. Keep out of reach of children.
The product is not waterproof. Do not handle with wet hands.
Do not attempt to disassemble or modify the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.

Installation Instructions

Take out the product
Place the poles vertically into the circular base in the middle of the soft cloth, and align each pole with the vertical bar on the soft cloth.
Pull up the soft cloth, press the ring of the softbox with palm and press down hard ( in the direction shown in the picture).
The fixing buckle at the bottom of the supporting skeleton is hooked into the positioning slot of the supporting rod.
Push and press the pole of the soft cloth with your fingers to align it with the warp line of the soft cloth. After that, put well the Velcro in place.
When disassembling, press the connection ring of the soft light box with both hands to remove the fixed buckle of the supporting skeleton from the positioning slot of thesupporting rod, and remove the soft cloth.

Package list

WARRANTY

Warranty

Thank you for purchasing COLBOR products.

Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.
Original COLBOR products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service andmaterials fee).

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation specification
Artificial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain or damp
Modifications to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration
The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
All consumable accessory attached to a product, like cable, cover 6. Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact COLBOR’s customer service through email.
Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged.

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us
via Email.
USER INFORMATION| Customer Name:
Phone Number:
Email:
Address:
SALES INFORMATION| Sales Date:
Model:
Product Code:
Dealer:
REPAIR RECORD| Service Date:
Technician:
Issue:

Result