Shenzhen Aitmon Technology ECT409W Wireless Washable Mouse User Manual
- June 5, 2024
- Shenzhen Aitmon Technology
Table of Contents
Shenzhen Aitmon Technology ECT409W Wireless Washable Mouse
Interface introduction
Specifications
- Working Methods: Optical mouse
- Dimensions: 115 x 62 x 36 mm
- Net weight: 90Gs
- DPI Maximum: 110Gs
- Connection: RF 2.4GHz
- Working distance: Abt 10m
- Input voltage: 1.5V
Antimicrobial
Mouse with antimicrobial protection is formulated to suppress the growth of odour and stain-causing microorganisms and is not intended for use as a replacement to proper hygiene or for the prevention of infectious illness.
General Cleaning Instructions
Spray-Wipe-Spray Method
- Check whether the battery sealing screw cap is tightened to prevent lquid immersion and damage to the product during cleaning.
- To avoid accidental keystrokes, entering or deleting important data. unplug the USB adapter from the device. before cleaning
- Clean the surface of the item by wiping. gently brushing. dipping it or by following the spray-wipe-spray protocol outlined as follows. Spray the product with disinfecting spray, wipe away dirt and organic solids with a cloth then spray the product completely again with disinfecting spray. allowing the disinfectant to remain on the product for at least five seconds.
- Either wipe with dry cloth or shake gently and allow to air dry.
Sanitizing Dip Method
- Check whether the battery sealing screw cap is tightened to prevent liquid immersion and damoge to the product during cleaning.
- To avoid occidental keystrokes, entering or deleting important data. unplug the USB adapter from the device. before cleaning. Soak and flush the mouse with approved cleaning ogents and disinfectants. Water temperature should be less than 50c (120 F) and water should not be deeper than 50 cm. Don’t use abrasives. Recommended cleaning materials: dish woshing liquid, non-abrasive cleanser, general purpose cleaner, disinfectant, soap water, rubbing alcohol/surgical spirit.
- Rinse thoroughly to remove any residual cleaning agent
- Drying the mouse. Shake the mouse to remove any residual water Dry off with a clean towel Do not usea hot-air drier To extend mouse life: Recommended to air dry overnight (about 8 hours) Reconnect the nmouse.
Europe-EU Declaration of Conformity
The product is in conformity with all the essential requirements and other provisions of the European Council Directive: Directive 2014/53/EU on Radio Equipment and RoHS Directive 2011/65/EU. Disposal of waste equipment by user in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling. please contact your local city office, your household waste disposal service or the shop where you purchased the product.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
-
this device may not cause harmful interference
-
this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures.- Reorient or relocate the receiving antenna.
- Increase the separation Detween the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.