BEZGAR RC ROD Runner User Guide
- June 3, 2024
- BEZGAR
Table of Contents
BEZGAR RC ROD Runner
INSTALLATION OF BATTERIES
Installation of Rechargeable Battery on the Car
- Unscrew the screw on the battery cover of the car.
- Remove the battery cover .
- Locate the hole on the top of the rechargeable battery for installing the wire, then insert the wire in and turn clockwise to fix it.
- lnstall the rechargeable battery pack in the battery com apartment.
- Close the battery cover.
- Tighten the screw with a plus screwdriver.
- Remove the battery cover.
- Prepare two 1.5V AA batteries (not included in the package), there are positive and negative end of the battery. Follow the battery directions indicated on the remote control to install them correctly.
- Close the battery cover.
BASIC OPERATIONS
- Switch on the car, then turn on the remote control. The remote control will automatically match the car’s band selectors in several seconds. Attention: The action must be taken in orders, switch the car first and then turn on the remote control. Otherwise, the car may not move.
- Use the remote control to control the car to run forward/back ward or to turn left/right.
- If the car can’t run along a straight line, please use the trimmer on the chassis for adjustment.
- Remember to switch off the car and the remote control after use.
USE CAUTIONS
PRECAUTIONS
Adult’s Supervision Required
This product needs to be used in a safe environment in order to avoid electric
shock. Children aged 8 or below are better to play it under parents
accompanied.
- Product Safety & Maintenance
- The new battery need to be charged before using.
- After the battery power is exhausted, take the battery out, and then connect the cable to charge the battery.
- In general, a full charge of the battery takes about 2 hours. There is no need to recharge it after the battery is full. Atten-tion, it is better to prolong the battery charged 3 hours during the first two battery charges.
- Please check the wire, battery and other components came with the product regularly. If any abnormalities are found, be sure to repair it.
- Make sure the main switch is set to OFF before installing the battery pack into the car body.
- Pay attention to the polarity marks in the battery compartments when installing the batteries.
- Do not try to charge non-rechargeable batteries.
- Do not mix up different types of batteries from different
- The battery must be charged with the charger (the charger doesn’t come with package), be sure that the technology parameter is fit for the charger.
- Do not immerse this car into water which may result in its electronic components.
- Do not expose this car to high temperature environment, high humidity or direct sunlight.
- Do not touch the wheels by hand to avoid being hurt while
- If you want to stop using it for a long time, be sure to remove the batteries from the remote control and the car body to avoid leakage.
- Never throw the batteries into fire to avoid explosion or leakage.
- Put the remote control and the car body together to avoid losing.
- Keep the car clean, if necessary, use a clean wet towel to wipe the car body gently. Keep this user Guide as well as other related accessories of the car for future use.
Read User Manual Online (PDF format)
Loading......