Lenco BTX-860 Waterproof Sport Bluetooth Headphone User Manual

BTX-860 Waterproof Sport Bluetooth Headphone
User Manual

Model BTX-860

User Manual
Waterproof Sport Bluetooth headphones and 8GB MP3 player in-1
CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.
4. Install in accordance with the supplied user manual.
5. • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
6. • Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles, and other heat-generating products or naked flame.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
14. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
15. • The socket-outlet must be installed near the equipment and must be easily accessible.
16. • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
17. • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
18. • Devices with class 2 construction do not require an earthed connection.
19. Keep away from rodents. Rodents enjoy biting on power cords.
20. • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
21. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
22. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with diluted detergent.
23. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
24. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
25. If the unit has a USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failure of data.
26. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
27. • To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.
28. If the unit works with battery, Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
29. Attention should be drawn to the environmental aspects of battery disposal.
30. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.
31. The rating label has been marked on the bottom or back panel of the apparatus.
32. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
33. This product is intended for nonprofessional use only and not for commercial or industrial use.
34. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
35. Never remove the casing of this apparatus.
36. Never place this apparatus on other electrical equipment.
37. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
38. Do not allow children access to plastic bags.
39. Only use attachments/accessories specified by the manufacturer.
40. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
41. • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
42. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.
• • Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
    * These instructions are related only to products using a power cable or an AC power adaptor.

Battery Charging Precautions:

1. This player uses a rechargeable Lithium Polymer battery. The first three times you charge the battery, ensure that it is charged for at least 2 hours and that you use the battery’s full charge before recharging. This will extend the battery’s life;
2. To extend the device’s playback time, continue charging the battery for 30 minutes after it has been fully recharged;
3.  Do not attempt to replace lithium batteries on your own. Send the player to customer service staff to replace lithium batteries. (CAUTION: batteries that are improperly replaced are at risk of explosion. Replacement batteries should be the same model or type of battery that comes with this device);
4.  Battery life may vary according to the conditions in which the battery is used or when the battery was manufactured;
5.  Batteries (batteries or battery packs) should not be left in hot environments;

Charging
To charge this device, connect it to a computer’s USB or to a USB AC adaptor of 5V. The device will charge whether it is turned on or off.
These instructions are for reference only. Due to software updates, the actual product may differ with the content in these instructions.

Package Contents

Note: This list is for reference only. Actual package contents are subject to change without prior notice.

Buttons

Play/Pause
On/Off/
Pair Reset| Press to Play/Pause audio playback or answer/hang up a phone call; Press and hold to refuse an incoming call
On: press and hold the button for 2-3s until you hear the “power on” sound.
Off: Press and hold the button for 2-3s until you hear the ‘power off” sound.
Paring: Make sure your phone’s Bluetooth is enabled.
While the BTX-860 device is turned off, press and hold the power button for about 6 seconds. You’ll hear the “Pairing” notification and the blue/red leds on the housing will start to flash quickly. On your phone, you now can search for new Bluetooth devices and select BTX860 to pair.
Reset: Press and hold the power button for 10s to reset the Player
Play mode switch| Press to switch the playback mode from sequential
Normal/shuffle/repeat 1 (while in MP3 play mode)
Bluetooth/MP3 mode switch| Press to switch between Bluetooth/ MP3 mode to play
Volume –| Short press to reduce volume; long press to skip to the previous song
Volume +| Short press to increase volume; long press to skip to the next song
Indicator light| Shows current operating status (see VI)
 USB port| Connect with a Micro USB cable to transfer data/recharge

Specifications

2-WMA 5kbps-382kbps
3-WAV ADPCM 32Kbps-382Kbps 4-APE 800Kbps-1000Kbps
5-FLAC 700Kbps-1200Kbps
Battery life (continued use)| Up to 10 hours in MP3 mode at low volume
Up to 5 hours in Bluetooth mode at low volume
Charging time| 1-2 hours
Battery| 120mAh 3.7V lithium polymer battery
Bluetooth version| 4.
Bluetooth protocol| A2DP, AVRCP, HSP
Effective transmission distance| 10 meters (in open areas, with no obstructing objects)
Headphones impedance| 160
Rated power| 2mW
Waterproof protection level| IPX8

Note: battery life may vary depending on playback volume, the type of the files being played, or the number of times buttons are pressed.

Bluetooth Playback

1. Connecting via Bluetooth
Before using BTX-860 for the first time, ensure that it can pair with your phone

1. Ensure that the BTX-860 is charged, your phone is turned on and Bluetooth is enabled.
2. To enter pairing mode, while the BTX-860 is turned off, press and hold For about 6 seconds until the indicator light flashes between blue and red.
3. Pair the BTX-860 with your phone

Operating instructions

Play/Pause| Press 1
Answer/Hang-up phone call| Press 1
Refuse phone call| Long press1
Previous/Next song| Long press 4/5
Decrease/Increase volume| Short press 4/5

MP3 play mode

1. Operating instructions

Play/Pause| Press 1
Change the play mode| Press 2(switch between sequential Normal/shuffle/repeat

1. Bluetooth/MP3 mode switch| Press 3 (switch between Bluetooth/MP3 mode play)
   Previous/Next song| Press and hold 4/5
   Decrease/Increase volume| Press 4/5

2. Resume play function: The BTX-860 has a resume play function, which continues playing your MP3 on the location you switched off the unit, while playing MP3. To  resume  play, you only have to switch on the BTX-860 and select the MP3 play mode.
Connecting to a computer: Use the USB cable that comes with the BTX-860. Connect to a PC’s USB port and check for a removable disk. The disk is named BTX-860. Pay attention, it can take up to 10 seconds before the name of the player “BTX-860” appears in the list of the removable disks on your computer screen. You can now copy audio files onto the removable disk.

Indicator light

1. In MP3 play mode, a red light will flash slowly
2. In Bluetooth play mode, a blue light will flash slowly
3. In Pairing mode, red and blue lights will flash quickly
4. When the device is paused, a blue light will stay on always
5. When charging the device, a red light will stay on. The light will turn blue when the device is fully charged

Using the Eartips

This device has two types of eartips: regular (red and black) and waterproof (solid black). If using the device while swimming, use the waterproof eartips. In other environments, regular eartips are recommended.

Remark: it is very important that you choose the right size of eartips that perfectly fit into your ears. If the size is too small or too big, the sound quality will not be perfect.

Troubleshooting

Check if the device is connected to Bluetooth.
If using MP3 mode play, ensure that audio files have been copied to the device
Check if the audio files are in a supported format
Check if the audio files are damaged
Make sure that the device is not in pause mode
Audio files cannot be transferred to the device| Check if the USB cable is properly connected Check if the device has sufficient storage space
The device cannot connect to Bluetooth| Check if your phone’s Bluetooth is enabled Restart the Bluetooth on your phone or BTX-860 Check if the device is in pairing mode
The sound is not good| Maybe you have selected the wrong size and type of eartips. See below for the information about swimming.
Intermitting sound in Bluetooth mode| Decrease the distance between the BTX-860 and the connected device.

Read before using your BTX-860 during swimming:

• Choose the size of eartips that feel the most fitting/comfortable in your ears.
• Put your BTX-860 into your ears and play some music and make sure you hear the music in the best way in the 2 ears. It could happen that you need 2 different sizes of eartips left and right because maybe your ears are different left and right.
•  If you will swim with your BTX-860, make sure the place is safe and that you can swim without hearing what happens around you.
• If you swim in a public swimming pool, make sure you follow the rules.

Choose the best type and size of eartips
Your BTX-860 comes with 3 pairs of normal (sport) eartips which are grey with a red structure inside and 3 pairs of swimming eartips which are black. The swimming eartips are closed inside to avoid water entering the earphones.
You can try both types of swimming: the normal and the swimming ones. Important is that there is no water getting into your ears (between the ear and the earphone structure).
If you get water into your ears, the sound will not be good!

If the sound becomes not good or if you get water into your ears while swimming
First, remove the water from your ears, and then remove the water from the eartips. You can shake your BTX-860 with the eartips down a few times on a towel. If you do not succeed to get the water off, you better take off the eartips and dry them with a towel or small piece of dry cloth. Also, dry the end of the earphones (where normally the eartips are fixed on). When all parts are dry, put again the eartips on the earphones and put the BTX-860 again into your ears to test the sound quality. If the sound is good you can try a bigger size of eartips for swimming to avoid that water coming again into your ears. Important is to find the best size and type of eartips for sport and for swimming.

Remark: the swimming eartips are closed inside, which means that you can better turn up the volume of the music to get the same result as with the normal eartips. For swimming, you better use a tighter size of eartips to avoid the water entering your ears.

**** (left the swimming ear tip, closed inside)

Taking off your BTX-860 from your ears
Be careful when you take off your players from your ears: if you are too fast, you can damage your ears and eardrums or it could happen that one ear tip remains in your ear.

Clean your earphones after every use
After use, you should clean the eartips and speaker tips of the BTX-860.
You can clean the eartips with natural soap and cold water and dry them well afterward.
The mesh sheet of the speakers of the player, you better dry, or clean with clear cold water. If still not clean enough, you can use a soft brush or Q-tip and make sure you let dry the BTX-860 at room temperature. Make sure you do not push anything into the mesh sheet. Do never use a hairdryer!

(mesh sheet of player’s speaker)

If you swim in the sea (saltwater), pay attention how you clean your BTX-860 as soon as possible with clear water. The warranty will not cover the product if it appears that any defect is caused by wrong use or bad maintenance.

Charging the battery of BTX-860
Charge the battery with the micro USB connector only when the player is dry. Do not charge the BTX-860 while it is still wet.

Guarantee

Lenco offers service and warranty in accordance with European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws of requirements for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking

Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage Directive (2014/35/EU) issued by the Commission of the European Community.
Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>