KUZCO WS90432 Mason LED Wall Sconce Instruction Manual

KUZCO WS90432 Mason LED Wall Sconce Instruction Manual

START FROM HERE

• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all time during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference

Please Note:

• This Kuzco LED fixture comes with pre-wired LED module(s)
• Unless instructed, Do Not touch any part of the LED module(s) as any unnecessary contact with the module could cause permanent damage
• Use ELV (Electronic Low Voltage) or TRIAC type of dimmer for dimming application
• 120V input

1. Remove fixture from its original package

2. Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b)

3. Make proper electrical connections (black to hot “L” , white to neutral “N” , ground to “GND” ) with wire nuts (1b) provided in hardware package

4. Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package

5. Attach canopy (2a) to mounting plate (1c) with canopy screws (2b).

19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF
1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com

References

• Kuzco Lighting – Modern Contemporary Lighting.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>