COMELIT UT9214 Ultra Buttons User Manual
- June 16, 2024
- Comelit
Table of Contents
COMELIT UT9214 Ultra Buttons
Specifications
- Product Name: Pulse module UT9213, UT9214 Ultra
- Model Number: art. UT9201
OVERVIEW
CONNECTION
cod| DIP ON|
---|---|---
1| 1| 8| 4| 15| 1,2,3,4| 22| 2,3,5| 29| 1,3,4,5
2| 2| 9| 1,4| 16| 5| 23| 1,2,3,5| 30| 2,3,4,5
3| 1,2| 10| 2,4| 17| 1,5| 24| 4,5| 31| 1,2,3,4,5
4| 3| 11| 1,2,4| 18| 2,5| 25| 1,4,5|
5| 1,3| 12| 3,4| 19| 1,2,5| 26| 2,4,5
6| 2,3| 13| 1,3,4| 20| 3,5| 27| 1,2,4,5
7| 1,2,3| 14| 2,3,4| 21| 1,3,5| 28| 3,4,5
- DIP 1-5: addressing call button module (see TAB. A). Addressing call button modules means that, in the event they are replaced, it is not necessary to reprogram the user codes for the buttons. All you need to do is assign the same address as before to the new module.
- DIP 6: configuring button type.
- Large button art. UT9213 (DIP6 ON).
- Double-height button art. UT9214 (DIP6 OFF, default).
- Connector for previous/next module.
The button has a nameplate that can be written on (A); alternatively, an adhesive label can be applied (B). The total thickness of the nameplate + adhesive label must not exceed 0.2 mm.
Removing elements
Warning
- This Comelit product is designed and manufactured for use in the creation of audio and video communication systems in residential, commercial, industrial and public buildings.
- All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals/instruction sheets supplied with those products. The product must be installed to the highest standards.
- Disconnect the power supply before carrying out any operations on the wiring.
- Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
- We advise against running the system wires through the same duct as power cables (230V or higher).
- To ensure Comelit products are used safely: carefully observe the indications provided in the manuals/instruction sheets; make sure the system created using Comelit products has not been tampered with /damaged.
- Comelit products do not require maintenance aside from routine cleaning, which should be carried out under the indications provided in the Manuals / Instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for the systems, by qualified technical personnel. Do not use alcohol or aggressive products for cleaning purposes.
- Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in this manual/instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual /instruction sheet at any time and without prior notice.
- The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the applicable directives. The full EU conformity declaration is available on the web page for the product.
- Following Art. 26 of the Italian Legislative Decree dated 14th March 2014, no. 49 “Implementation of directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)”, the “crossed-out wheelie bin” symbol indicates that at the end of its useful life, this product must be separated from other waste before collection for disposal. The user should therefore take the exhausted appliance to suitable local collection centres for waste electrical and electronic products. As an alternative to handling this process yourself, you can take the appliance to your local equipment dealer when purchasing a new equivalent product. Electronics dealership businesses covering an area of 400 m² are also obliged to accept waste electronic products smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated waste collection for the subsequent reuse of the appliance sent for recycling, processing and environmentally conscious disposal helps to avoid potential negative effects on the environment and human health and encourages the reuse and recycling of the materials used in the construction of the appliance.
FAQ
(Frequently Asked Questions)
- Q: What is the purpose of addressing call button modules?
- A: Addressing call button modules allows for easy replacement without the need to reprogram user codes for the buttons. Simply assign the same address as before to the new module.
- Q: How do I configure the button type?
- A: Use the DIP6 switch to configure the button type. Set it to ON for the large button art. UT9213, or set it to OFF (default) for the double-height button art. UT9214.
- Q: Can I connect multiple modules together?
- A: Yes, you can connect multiple modules together using the connector provided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>