COMELIT G116V Door Entry Monitor Owner’s Manual

COMELIT G116V Door Entry Monitor

Specifications

• Model: Door Entry Monitor G116V
• Model: Power Supply Unit G116A
• Operating Temperature: Not specified
• Operating Humidity: Not specified
• Power Supply: 15 VDC/2 A

Product Usage Instructions

Door Entry Monitor G116V
Description: The Door Entry Monitor G116V features a 7″ display, microphone, buttons for menu navigation, and various control functions.

Installation

1. Mount the monitor at a suitable height (recommended: 160 cm to the top and 130 cm to the bottom).
2. Insert a MicroSD card into the designated slot (MicroSD card not included).

Settings

Menu Navigation:

1. In standby mode, press the MENU button to access the main menu.
2. Scroll through settings using the navigation buttons.

Settings Menu Options:

• Brightness control
• Contrast adjustment
• Colour adjustment
• Set date and time
• Delete images
• Save images to MicroSD
• Exit menu

Deleting Images:

1. Select “Delete images” from the menu.
2. Choose to delete all images or cancel.
3. Confirm the action.

Saving Images to MicroSD:

1. Select “Save images to MicroSD” from the menu.
2. Select to save all images or cancel.
3. Confirm the action.

Exiting the Menu:

Select “Exit menu” and confirm to exit the settings menu.

Power Supply Unit G116A
Description: The Power Supply Unit G116A provides power to the Door Entry Monitor G116V.

Installation

1. Connect NL mains voltage input (100-240 VAC/50-60 Hz).
2. Connect the output (+-) 15 VDC/2 A.

FAQ

• Q: Can I install the Door Entry Monitor outdoors?
  A: No, the Door Entry Monitor is exclusively for indoor use.

• Q: How many images can the monitor store?
  A: The monitor can store up to 100 images of visitors automatically when a call is received from the entrance panel.

• Q: What should I do with the product at the end of its life?
  A: The product must be separated from other waste before disposal. Please refer to local regulations for proper disposal methods.

Description

1. Slot for MicroSD card (not supplied)
2. 7” display
3. Microphone
4. Buttons and LEDs

Installation

Settings

MENU NAVIGATION

1. While the door entry monitor is in standby mode, press and then to access the main menu.
   » The following window will appear

2. Press to scroll through the settings menu.
   » The selected option is highlighted.

3. Press and to adjust the setting to the desired value.

4. Press to confirm.

SETTINGS MENU OPTIONS

When a call is received from the entrance panel, the door entry monitor automatically captures an image of the visitor (up to 100 images).

Delete images

1. Select the menu .
2. Press and to select whether you want to delete all the images stored in the memory, or select to cancel the procedure.
3. Press to confirm.

Saving images to the MicroSD (not supplied)

1. Select the menu .
2. Press and to select whether you want to save all the images to the SD card, or select to cancel the procedure.
3. Press to confirm.

Exiting the menu
Select and press or to exit the Settings menu.

Description

1. NL mains voltage input 100-240 VAC/50-60 Hz
2. +- output 15 VDC/2 A

TECHNICAL SPECIFICATIONS

• Operating temperature -10 to 50 (°C)
• Operating humidity (max. RH) 85 max. (%)

Appliance exclusively for indoor use. Risk of electric shock; proceed with caution. Install inside a closed electrical panel so that it may only be accessed by authorised personnel. A suitable omnipolar mains switch with a contact opening of at least 3 mm must be fitted upstream of the video entry system.

• Cut off the power supply before carrying out any work.
• Do not block the ventilation and cooling openings or slits.

Installation

Wiring diagrams

WARNING

• This Comelit product is designed and manufactured for use in the creation of audio and video communication systems in residential, commercial, industrial and public buildings.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals/instruction sheets supplied with those products. The product must be installed to the highest standards.
• Disconnect the power supply before carrying out any operations on the wiring.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals/instruction sheets; make sure the system created using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out by the indications provided in the Manuals / Instruction sheets. Any repairs must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for the systems, by qualified technical personnel. Do not use alcohol or aggressive products for cleaning purposes.
• Comelit Group S.p.A. accepts no liability for any purpose other than the intended use, or failure to observe the indications and warnings contained in this manual/instruction sheet. Comelit Group S.p.A. reserves the right to change the information provided in this manual/instruction sheet at any time and without prior notice.
• The manufacturer, Comelit Group S.p.A., hereby declares that this equipment conforms to the applicable directives. The full EU conformity declaration is available on the web page for the product.
• By art. 26 of Italian Legislative Decree dated 14th March 2014, no. 49 “Implementation of directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)”, the “crossed-out wheelie bin” symbol indicates that at the end of its useful life, this product must be separated from other waste before collection for disposal. The user should therefore take the exhausted appliance to suitable local collection centres for waste electrical and electronic products. As an alternative to handling this process yourself, you can take the appliance to your local equipment dealer when purchasing a new equivalent product. Electronics dealership businesses covering an area of 400 m² are also obliged to accept waste electronic products smaller than 25 cm for disposal, without any obligation to purchase. Suitable separated waste collection for the subsequent reuse of the appliance sent for recycling, processing and environmentally conscious disposal helps to avoid potential negative effects on the environment and human health and encourages the reuse and recycling of the materials used in the construction of the appliance.

www.comelitgroup.com
Via Don Arrigoni, 5 – 24020 Rovetta (BG) – Italy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>