imou Ranger 2 HD Wi-Fi CCTV Camera User Guide
- June 6, 2024
- imou
Table of Contents
User Guide
Welcome
Thank you for choosing Imou. We are devoted to providing you easy smart home
products. If you have problems using the product, please contact our service
team before returning your product.
Our service mail:
service.global@imoulife.com.
Detailed installation instructions & videos, frequently asked questions can be
found at: imoulife.com/support/help or
scan this QR code to help page.
http://www.imoulife.com/web/support/help
Package content
Camera Introduction
| LED Status | Device Status |
|---|---|
| Off | Powered off/LED turned off Rebooting after reset |
| Red light on Booting | Device malfunction |
| Greenlight flashing | Waiting for network |
| Greenlight on | Operating properly |
| Red light flashing | Network connection failed |
| Green and red light flashing alternately | Firmware updating |
http://mobile.easy4ipcloud.com/imou/detect.html
To ensure the best possible wireless performance, please make sure that there are no obstacles and electromagnetic interference between the camera and router.
Troubleshooting
| Problem | Solution |
|---|---|
| Cannot configure the camera |
- Make sure that your smartphone and the camera are within range of your Wi-A router.
- Make sure that the LED indicator on the camera is flashing green.
How to find the camera WI-Fl password| It is the safety code on the device
label.
No picture or device is offline|
- Make sure that the LED indicator on the camera Is flashing green. See the “LED Status” section for details if otherwise.
- Make sure that the camera is properly connected to power using the included USB power adapter.
- Reposition the camera, router, or both to improve signal strength.
Picture is not clear|
- Check the camera lens for dirt, dust, and spider webs. Clean the lens with a soft, clean cloth.
- Remove the vinyl cover on the camera lens.
No audio|
- Make sure that the audio function on the camera is turned on.
- Make sure that audio is turned up on the viewing device.
Human detection does not work| Make sure that you have enabled Human Detection
in the Device Settings interface of you Life App.
Camera stuck downwards| Check Privacy Mode setting on Irnou Life App.
Fail to scan QR code|
- Clean the camera lens of your smartphone.
- Make sure that there is enough light on the OR code.
- Do not hold the QR code too close to the camera.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>