COMELIT G115KFR0 7 Plus Video Kit Instructions

Kit Vidéo 7 Plus

art. G115KFR0 & G115KFR1

Important Safety Information

1. Please read these instructions carefully before installing and using the product.
2. Do not cut the power supply cable to extend it; the device (transformer) will not work with a longer cable. Do not plug in the device until all the wiring has been finished.

Installation Safety

1. Keep children and bystanders away while installing the products. Distractions can cause you to lose control.
2. Do not overreach when installing this product. Keep proper footing and balance at all times. This enables better control in unexpected situations.
3. This product is not a toy. Mount it out of reach of children.

Operation Safety

1. Do not operate electrically powered products in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Electrically powered products create sparks which may ignite the dust or fumes.
2. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
3. Do not expose the Power Adapter of this product to rain or wet conditions. Water entering the Power Adapter will increase the risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
5. The adapter must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock.

Packing list

| | | |
---|---|---|---|---
| | | |

Icon Introduction

1 Microphone
2 MENU Button
3 Left Button/Adjust the ring volume
4 Right Button/Setting the bell tone
5 Mute Button
6 Mute indicator LED
7 Internal call button
8 Unlock button
9 Unlock button
10 Intercom/Monitor Button

a) Depend on user’s height

1. Choose a suitable place.
2. Mount backing plate of indoor-monitor by drilling holes in the wall, and screwing the backing plate firmly, making provision for the cable to pass through.
3. Connect the wires to screw terminals as per diagram.
4. Insert the bracket into the slots of indoor-monitor.

The key function of outdoor-camera

1. Speaker

2. Infrared LED

3. Microphone

4. Photosensitive resistor

5. Call Button

6. Camera lens

7. Rain cover

8. Unlock setting

Installation

When install the camera, ensure that it is located in dry place. It is important that the camera or the electronics do not get wet.

The key function of power supply

1. AC IN
   100~240V~50/60Hz

2. DC OUT
   15V/2A

Installation

(1)                                                                   (2)

(3)                                                             (4)

Cable connections

1. Indoor-monitor

2. Outdoor-camera

3. DC 15V

4. 2 wire

5. Lock
   (excluded)

6. Indoor-monitor
   Extension

1. Red
2. Black
3. Indoor-monitor Extension
4. Lock
5. Outdoor-camera

Function settings

During standby mode, press the button firstly, then Press button, will pop up the main menu. Press button to move another setting. And the relevant submenu will be in highlight. Press or button to adjust it

BRIGHTNESS adjustment

CONTRAST adjustment

COLOR adjustment

DATE Setting

TIME Setting

  DELETE photo
It will delete all the photo in the memory.

COPY photo
It will delete all the photo in the memory.

EXIT

a) Unlock Time
b) 4~7 Sec
c) 1 Sec

Operation

1. Intercom:
When a visitor press the call button of outdoor panel, The monitor will give a sound. Press the button, to answer and talk to the person outside,

2. Monitor:
Under the standby status, Press the button, The screen firstly displays the picture of the outdoor panel.

3. Unlock:
After identifying the visitor, press the or button to open the door/gate for the visitor.

4. Adjust the ring volume:
Under the standby status. Keep on press the button about 2 seconds to adjust the ring volume.

5. Setting the bell tone:
Under the standby status. Keep on press the button about 2 seconds to select bell tone.

6. Intercom (For extended indoor-monitor)
When the whole system is on a standby status, Keep on press the button to activate internal calling.

7. Mute (e.g. if night-time quiet is required):
The bell tone can be deactivated. To do this, press the button, the LED flashes to remind you that the tone is deactivated.

8. Take photo / Playback:
– When the call button is pressed, the device automatically takes a photo. System memory can store up to 100 photos.
– If the memory is full and no memory card is inserted, the first photo will be overwritten automatically
– If the memory is full and memory card is inserted, all photos in the memory will be moved to the memory card

9. Playback:
While in standby mode Press the button. Press or button to view previous /next the photo.

Note: When there is the photo has been not preview, in the upper left corner of the screen will pop up icon .

Specifications

Indoor-monitor

Outdoor-camera

1 – We will maximize to provide more accurate information. There are only small differences between the pictures of description and the actual product. relating to the specification, appearance and color, to offer subject to the actual product.

2 – If need be, our products and related data are constantly updated and new elements added. This amendment can be changed without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>