WOOX R9061 Smart Video Doorbell with Chime User Guide

Smart Video Doorbell with Chime
Quick Start Guide
R9061

Version: 20210316

Charge LED status: Charging in Red; Full in Green.

Installation

Step 1: Open the battery cover.

Step 2: Install 18650 battery and Mirco-SD.

Note: Please notice the polarity of the battery. Please full charge this doorbell before using it for the first time.

Step 3: Drill four holes in your wall, and install the anchors.

Step 4: Fix the doorbell on the wall through fixing screw hole.

Step 5: Mount doorbell in the direction of the arrow and lock it by the screws at the bottom.

Package includes

1. Smart video doorbell x 1
2. Indoor chime unit x 1
3. Reset pin x 1
4. Screws and wall plugs x 5
5. Grub screw x 4
6. L shaped screw driver x 1
7. 2600mAh Lithium-ion battery x 2
8. USB cable x 1

Specification:

• Battery: 2600mAh lithium battery X 2, rechargeable. (included)
• Battery lifetime: approximate 3-6 months.
• Camera resolution: 1920x1080P.
• Motion Detection with notification alerts.
• Talk with two-way audio with built-in Mic & Speaker.
• Automatically switches to night vision when lighting is dim.
• Storage: Supports SD card 128G max (FAT32 format, not included).
• Works with Echo show and Google nest hub.
• Plug-in Chime with 36 selectable Ring Tones (included).
• 4-Level adjustable chime volume: 30 to 100dB.
• Chime frequency: 433. 92MHz.

Requirement to use

1. WOOX Home app
2. WLAN-enabled router: 2.4GHz (Separate band)

Set up Smart Video Doorbell to WOOX Home app

1. Download and install the app “WOOX Home” from Apple App Store or Google Play Store on your smartphone.

2. Launch the app “WOOX Home”.

3. Create a new account or log in to your existing account.

4. Tap “+” to add the device.

5. Select the applicable product type from the list of products.

6. Ensure the indicator light is quick flashing (flashing 1 times per second). If the indicator light isn’t flashing: hold and press the reset button on the back of camera until the indicator light starts to flash.

7. Confirm the Wi-Fi network and password.
   Note: only 2.4GHz WiFi is supported.

8. The App will prompt you to scan a QR code that needs to be read by the camera in the Smart Video Doorbell to initiate pairing, press continue on the App and a QR code should now be generated to pair the product to your account. Position your mobile or tablet device in front of the camera lens and ensure the QR code is in full frame of view, once you hear the sound prompt confirm this on the App, this will commence the final stage of pairing the Smart Video Doorbell to your account.

9. The app will now search for the device and register is to your account.

10. Enter the device name.
    Note: The device name will also be used by Amazon Alexa and Google Home.

Wireless Indoor Chime Manual

Pair indoor chime to doorbell

The chime unit comes pre-paired with the video doorbell. If there isn’t sound refer to below instruction:

1. Press the “Ring” button to choose one you like. The indoor chime offers 36 different kinds of music for options. Each press changes the music.
2. Press the “volume” button for 5 seconds till the music changes.
3. Press the doorbell button to match the indoor chime. Now, you can press the call button of doorbell and listening for the chime.

Change the ring

Repeat the pairing steps as above.

Volume settings

Press the “volume” button once to trigger one time. There are 4 volume levels you can choose from low to high.

Frequently Asked Questions

1. Can I share with family and friends?
   Yes, you can share your cameras with family and friends who will have access to view the camera and control your bulbs, plugs, and other devices. In the app, click the Family name at the top and click on the“Home Management”button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account.

2. What’s the Wireless Range?
   The range of your home Wi-Fi is heavily dependent on your home router and the conditions of
   the room. Check with your router specifications for exact range data.

3. How many cameras can I control?
   WOOX Security app can control an unlimited amount of devices in an unlimited amount of locations. Your router may have a limit of how many devices can be connected to one router.

4. My device can’t be connected to network with App
   • Make sure the device is under the config status (indicator light is flashing quickly).
   • Make sure the Wi-Fi is avaliable and the device is not far away from the router.
   • Make sure the Wi-Fi password you input is correct.

5. My device shows ofline in my App
   • Make sure the device is powered on.
   • Make sure the network is stable and the Wi-Fi name and password not modifed. If not, add device again.
   • If the network is normal, but its still offine. Check if there are too many Wi-Fi connections. You can restart your router to check the status of the device.

6. You can find much more useful information in the Help Center in the app App. You can aslo contact us via the Help Center Feedback in the App.
   If you need further help or have comments or suggestions please visit www.wooxhome.com.

References

• Connecting your home to a smarter future; WOOX Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>