robustel R2110 LTE Advanced Cellular Router Owner’s Manual

: June 9, 2024
: robustel

Table of Contents

robustel R2110 LTE Advanced Cellular Router
Regulatory and Type Approval Information
Radio Specifications
Simplified EU Declaration of Conformity
FCC Declaration of Conformity
Overview
Package Checklist
Hardware Installation
Login to the Device
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

robustel R2110 LTE Advanced Cellular Router

robustel-R2110-LTE-Advanced-Cellular-Router-product

Regulatory and Type Approval Information

Table 1: Directives

2011/65/EU| The European RoHS2.0 2011/65/EU Directive was issued by the European parliament and the European Council on 1 July 2011 on the restriction of the use of certain Hazardous substances in electrical and electronic equipment.
---|---
2012/19/EU| The European WEEE 2012/19/EU Directive was issued by the European parliament

and the European Council on 24 July 2012 on waste electrical and electronic equipment.

2013/56/EU| The European 2013/56/EU Directive is a battery Directive which published in the EU official gazette on 10 December 2013. The button battery used in this product conforms to the standard of 2013/56/EU directive.

Table 2: Standards of the electronic industry of the People’s Republic of China

SJ/T

11363-2006

| The electronic industry standard of the People’s Republic of China SJ/T 11363-2006 “Requirements for Concentration Limits for Certain Toxic and Hazardous Substances in Electronic Information Products” issued by the ministry of information industry of the People’s Republic of China on November 6, 2006, stipulates the maximum allowable concentration of toxic and hazardous substances in electronic information products.

Please see Table 3 for an overview of toxic or hazardous substances or elements that might be

contained in product parts in concentrations above the limits defined by SJ/T 11363-2006.

---|---
SJ/T

11364-2014

| The electronic industry standard of the People’s Republic of China SJ/T 11364-2014 “Labeling Requirements for Restricted Use of Hazardous Substances in Electronic and Electrical Products” issued by the ministry of Industry and information technology of the People’s Republic of China on July 9, 2014, stipulates the Labeling requirements of hazardous substances in electronic and electrical products, environmental protection use time limit and whether it can be recycled.

This standard is applicable to electronic and electrical products sold within the territory of the People’s Republic of China, and can also be used for reference in the logistics process of electronic and electrical products.

The orange logo below is used for Robustel products:

Indicates its warning attribute, that is, some hazardous substances are contained in the product. The “10” in the middle of the legend refers to the environment-friendly Use Period (EFUP) * of electronic information product, which is 10 years. It can be used safely during the

environment-friendly Use Period. After the environmental protection period of use, it should enter the recycling system.

*The term of environmental protection use of electronic information products refers to the term during which the toxic and hazardous substances or elements contained in electronic information products will not be leaked or mutated and cause serious pollution to the environment or serious damage to people and property under normal conditions of use.

Table 3: Toxic or Hazardous Substances or Elements with Defined Concentration Limits

Name of the Part	Hazardous Substances
(Pb)	(Hg)

Metal

parts

| o| o| o| o| –| –| –| –| –| –
Circuit

modules

| o| o| o| o| o| o| o| o| o| o
Cables and cable assemblie

s

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

Plastic and polymeric

parts

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

|

o

o:

Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in RoHS2.0.

X:

Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this part might exceed the limit requirement in RoHS2.0.

-:

Indicates that it does not contain the toxic or hazardous substance.

Radio Specifications

RF technologies	2G, 3G, 4G, Wi-Fi, GNSS, BLE
	4G : LTE FDD: B1/B3/B5/B7/B8/B18/B19/B21/B28
	LTE TDD: B38/B39/B40/B41

3G : UMTS/HSPA+: B1/B5/B6/B8/B9/B19

3G : WCDMA: B1/B2/B4/B5/B6/B8/B19

| Oceania EMEA
| 2G : GSM: B2/B3/B5/B8|
| 4G : LTE FDD: B1/B3/B8/B18/B19/B26

LTE TDD: B41

| Japan

Robustel R2110 Hardware Manual

| 3G : WCDMA: B1/B6/B8/B19|
---|---|---
Wi-Fi Frequency| 2.4 GHz: 2.412 – 2.484 GHz

5 GHz: 5.180 – 5.825 GHz

BLE Frequency| 2402 ~ 2480 MHz
Max RF power| 35 dBm@GSM, 25 dBm@WCDMA, 25.7 dBm@LTE, 20dBm@Wi-Fi, 8 dBm@BLE

Simplified EU Declaration of Conformity

We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou, China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is available at the following internet address: www.robustel.com/certifications/

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

IC Declaration of Conformity
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
This device complies with IC exposure limits set forth for an uncontrolled environment. This device shall be installed and operated with minimum distance 20cm between the radiator & body.
Related download link
Find more product documents or tools at: www.robustel.com/en/documentations/

Technical Support

Tel: +86-20-82321505
Email: support@robustel.com
Web: www.robustel.com

Document History
Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.

Date| Firmware Version| Document Version| Change Description
---|---|---|---
Aug. 03, 2022| 5.0.0| 1.0.0| Initial release.
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |

Overview

The Robustel Industrial Cellular Bluetooth Router (R2110) is a rugged cellular router offering state-of-the-art mobile connectivity for internet of things applications.

Package Checklist

Before commencing installation ensure your package has the following components: robustel-R2110-LTE-Advanced-Cellular-Router-fig
1

Note: The accessories could be different on specific order.

Panel Layout(May Vary on Different Models)

Interface Descriptions

Power Supply. 3PIN 3.5mm pitch terminal block.

PIN| Description| Note|
---|---|---|---
1| V+| Connect adapter or battery positive (red line)|

robustel-R2110-LTE-Advanced-Cellular-Router-fig 3

Note:

1) ACC and POE function can only be selected one

2) The input voltage is 10 to 30V DC(With ignition sensing) or 9 to 36V DC(Without ignition sensing)

2| V-| Connect adapter or battery negative (yellow line)

3

|

ACC

(Optional)

|

Car ignition and flameout detection (green line)

Note: when the car ignition and flameout detection function is not used, the ACC pin is connected to the V+ and cannot be left floating.

LED Indicator.

Name	Color	Status	Description
RUN	Green	On, solid	Router is powered on (System is initializing)
On, blinking	Router starts operating
Off	Router is powered off
MODEM	Green	On, solid	Link connection is working
On, blinking	Data is sent and received.
Off	Link connection is not working
NET	Green	On, solid	Connection to 4G network is established
On, blinking	Connection to Legacy network (3G or 2G) is established
Off	Network is not joined or joining
USR-OpenVPN	Green	On, solid	OpenVPN connection is established
Off	OpenVPN connection is not established
USR-IPsec	Green	On, solid	IPsec connection is established
Off	IPsec connection is not established
USR-SIM	Green	On, solid	Main SIM card is being used
On, blinking	Backup SIM card is being used
Off	No SIM card is being used
****	Green	On, solid	Received signal strength is greater than -73dBm

Note: You can choose the display type of USR LED. For more details, please refer to
RT123_SM_RobustOS Software Manual Service > Advanced > System >System Settings

User LED Type.

Reset Button. (TBD)

Function	Operation
Reboot	Press and hold the RST button for 2~ 5 seconds under the operating

status.
Restore to default

configuration

| Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default

configuration.

Restore to factory

default settings

| Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory

default settings.

Note: The more details please refer to _RT123_SMRobustOS Software Manual, 2.3 Factory Reset.

Ethernet Ports. There are four Ethernet ports on R2110-4L, including ETH0 (POE), ETH1, ETH2, ETH3. Each has two LED indicators. The yellow one is a link indicator but the green one doesn’t mean anything. For details about status, see the table below.

Indicator	Status	Description
Link indicator (Yellow)	On, solid	Connection is established
On, blinking	Data is being transferred
Off	Connection is not established

Digital IO & Serial Port. 2x5PIN 3.5mm pitch terminal block, 1 set of DO, 1 set of DI, 1 x RS232 and 1 x RS485. DI signal access, can be used for NPN/PNP type sensor signal or switch signal acquisition. DO signal output, can be used for NPN/PNP sensor control, please connect signals by referring to typical applications.

PIN| DI/DO| RS232| RS485| Direction|
---|---|---|---|---|---
1| IGND| —| —| —|

Internal diagram of DI&DO

2| OGND| —| —| —
3| —| TXD| —| Router ® Device
4| —| RXD| —| Router ¬ Device
5| —| GND| —| —
6| IN| —| —| —
7| OUT| —| —| —
8| —| —| A| —
9| —| —| B| —
10| —| —| GND| —
Application:

robustel-R2110-LTE-Advanced-Cellular-Router-fig 6

Note: The external power supply DC voltage range is 3V~30V.

USB Interface.

Function	Operation
Firmware upgrade	USB interface is used for batch firmware upgrading, but

cannot be used for sending or receiving data from slave devices which connected to it. You can insert a USB storage device into the router’s USB interface, such as a U disk or a hard disk. If there have a supported configuration file or a router firmware in this USB storage device, the router will automatically update the

configuration file or the firmware. For more details, see _RT123_SMRobustOS Software Manual.

Hardware Installation

SIM Card Installation. Remove the SIM card cover to insert the SIM cards into the device, then screw up the cover.
Antenna Installation. Rotate the antenna into the antenna connector accordingly. Here take the cellular antenna as example.
Terminal Block Installation. Insert the terminal blocks into the interfaces connector, then can connect the devices or sensors to the gateway via corresponding interfaces e.g. RS232/RS485, DIDO…
Mounting Kit installation. (Optional)
Grounding the Device. Grounding will help to prevent the noise effect due to electromagnetic interference (EMI). Connect the device to the site ground wire by the grounding screw before powering on.
Power Supply installation. Insert the power supply cord into the corresponding terminal block if needed, then insert the terminal block into the power connector.
Connect the Router to a Computer. Connect an Ethernet cable to the port marked ETH1~ETH3 at the front of the R2110 Router, and connect the other end of the cable to your computer.

Connect the router’s Ethernet port to a PC with a standard Ethernet cable.
Before logging in, manually configure the PC with a static IP address on the same subnet as the gateway address, click and configure “Use the following IP address”.
To enter the gateway’s web interface, type http://192.168.0.1 into the URL field of your Internet browser.
Use login information shown in the product label when prompted for authentication.
After logging in, the home page of the web interface is displayed, then you can view system information and perform configuration on the device.
The automatic APN selection is ON by default, if need to specify your own APN, please go to the menu Interface->Link Manager->Link Setting->WWAN Settings to finish the specific setting.
The more configuration details please refer to RT123_SM_RobustOS Software Manual.(END)

Support: support@robustel.com
Website: www.robustel.com
©2022 Guangzhou Robustel Co., Ltd.
All rights reserved. Subject to change without notice.