Comelit 6944W Venice Android Wi-Fi Door Entry Monitor Vip System Instruction Manual

Comelit 6944W Venice Android Wi-Fi Door Entry Monitor Vip System

MYCOMELIT: THE APP FOR PROFESSIONALS

FREE DOWNLOAD

Warning

• This Comelit product was designed for use in the creation of audio and video communication systems in residential, commercial or industrial settings and in public buildings or buildings used by the public.
• All activities connected to the installation of Comelit products must be carried out by qualified technical personnel, with careful observation of the indications provided in the manuals / instruction sheets supplied with those products.
• Cut off the power supply before carrying out any maintenance procedures.
• Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system manual.
• We advise against running the system wires through the same duct as the power cables (230V or higher).
• To ensure Comelit products are used safely: carefully observe the indications provided in the manuals / instruction sheets and make sure the system created using Comelit products has not been tampered with / damaged.
• Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance with the indications provided in the manuals / instruction sheets. Any repair work must be carried out: for the products themselves, exclusively by Comelit Group S.p.A., for systems, by qualified technical personnel.
• Comelit Group S.p.A. does not assume any responsibility for: any usage other than the intended use; non-observance of the indications and warnings contained in this manual / instruction sheet. Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this manual at any time and without prior notice.
• The manufacturer, Comelit Group S.p.A., hereby declares that the radio equipment art. 6944W/6944B conforms to directive 2014/53/EU. The full EU conformity declaration is available at the following web address: pro.comelitgroup.com/product/6944W/6944B

Description

Wi-Fi Venice 10 inches touch screen door entry monitor with full-duplex hands- free audio. Audio, ringtone, colour and contrast adjustment. Ringtone can be customised. Equipped with video memory function and internal directory for the management of intercom calls. Management of external floor door call. Wall mounted. Compatible with H264 video format. The device has one standard SPOE LAN port (24VDC) and Wi-Fi connection to guarantee Internet connection for installed APPs. To install the monitor is required to have a flush mounting box with screws wheelbase of 60mm

1. LCD Display
2. Touch screen
3. 10” 16:9
4. Pixel 1280×800
5. Microphone
6. 2 magnets for fixing the door entry monitor to the bracket
7. RJ45 SPOE (24 VDC) to connect art. 1442B
8. Power input (18-24 VDC) * as an alternative to SPOE power supply
9. Input *
10. AL – Alarm input
11. PAN – Panic input
12. IN1 – General purpose input
13. GND – Ground for input
14. 12V OUT – Not used
15. A4…A8 – Not used
16. Outside door call input
17. Speaker

Technical specifications

**GENERAL DATA **|  |  | **DISPLAY FEATURES **|  | **AUDIO FEATURES **|
---|---|---|---|---|---|---
Product height (mm) | 185 __|  | Size (inches)| 10|  | Tech. implemented| Full-Duplex|
Product width (mm)| 260|  | Aspect Ratio| 16:9|  |  |  |
Product depth (mm)| 17|  | Touch screen| Yes, capacitive| **ELECTRICAL CHARACTERISTICS **|
Product color| White or Black|  | Resolution (pixels)| 1280×800|  | Type of power supply| PoE, External power

supply

|
Material| Plastic|  | OSD menu| Yes|  |  |
 | Supply voltage| 18-24VDC|
Wall-mounted| Yes|  | Type of display| LCD|
 | PoE power supply| SPoE (24VDC)|

Installation

Configuration

CONFIGURATION WIZARD

1. Select the desired language, confirm by pressing and continue with guided configuration by pressing continue >

2. Select the Wi-Fi network to which you wish to connect, enter the password, confirm and continue with guided configuration by pressing continue >

3. Set the date and time

4. to automatically update the date and time via internet: Activate “Automatically set Date & Time” and select your time zone

5. to set the device date and time manually:
    Deactivate “Automatically set Date & Time” and press the individual elements to customise them continue with guided configuration by pressing continue >

6. Set the ViP address for the device (8-character alphanumeric ID code provided by your installer) and choose whether you want to install the monitor as:

7. Master unit (main monitor)

8. Slave unit (secondary monitor

9. Press “Complete” to complete the configuration process.

10. Customisation and programming can be carried out via the setup menus, or using the ViP Manager software which is available to download from the website pro.comelitgroup.com

Operating distances

UTP5 cat. 5 0,2 mm²

(Ø 0,5 mm AWG 24)

| SPOE 24 VDC| 70
Pair of cables 24 AWG| 30

Basic wiring diagram

20 m max. Local door-opener button

Variant with second external unit

20 m max. Local door-opener button

Variant with PoE standard switch

20 m max. Local door-opener button

CERTIFIED MANAGEMENT SYSTEMS
www.comelitgroup.com
Via Don Arrigoni, 5 – 24020 Rovetta (BG) – Italy

References

• Comelit Pro Home

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>