ITS12WC Spigen OneTap Pro 3 Cryomax Wireless Car Charger User Manual

June 16, 2024
Spigen

spigen - logo

Spigen OneTap Pro 3 Cryomax
Wireless Car Charger Airvent
User Manual
ITS12WC

Product Contents

  1. Charging Pad
  2. Locking Bolt
  3. Vent Clip

√ Only compatible with MagSafe Compatible iPhones
√  Please use MagSafe case if you choose to use a case

Installation Guide

ITS12WC Spigen OneTap Pro 3 Cryomax Wireless Car Charger - Installation
Guide

Caution

  •  For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately).
  • Remove all metal plates or credit cards during wireless charging.

Note

B Class Equipment (Equipment for home use)

  • This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.

Specifications

  • Model: ITS12WC
  • Input: 5V 2.0A, 9V 1.67A
  • Output: 5.0W, 7.5W
  • Dimensions: 76.00 x 83.10 x 95.80mm / 2.99 x 3.27 x 3.77in
  • Weight: 151.00g / 5.32oz

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit difierent from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The following importer is the responsible party (for FCC matters only).
Spigen Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : spigen.support@spigen.com

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
CAN RSS-216 / CNR-216
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

Declaration of Conformity

Hereby, Spigen Korea Co., Ltd declares that the product type “Spigen OneTap Pro 3 Cryomax Wireless Car Charger Airvent ITS12WC” is in compliance with Directive 2014/30/EU & 2014/53/EU & 2011/65/EU & 2014/35/EU.
Spigen Korea Co, Ltd. SpigenHQ A Dong, 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Rep. of KOREA

UK
This device can be used in Europe. This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Spigen Korea Co., Ltd. declares that the product type ITS12WC is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address : https://www.spigen.com/

Radiated H-Field -3.1 dBuA/m(@10m)
TX/RX Frequency Range 110-148kHz(Only for EU&UK)

US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative : OBELIS S.A Bd. Général Wahis, 53 1030 Brussels, Belgium +3227325954
UK Customer Only
Authorized Representative for UK : JNMUK LIMITED
Address : V307 Vox Studios, 1-45 Durham Street Vauxhall, London, SE11 5JH Tel : +44 20 8176 0793
Germany Customer Only (ProdSG)
Contact : HH Compliance Limited Block 3, Harcourt Centre, Harcourt Road, Dublin 2, Ireland.
Manufacturer : Manufactured for Spigen Korea by Shenzhen PowerQI
Technology Co., Ltd
Address : 2nd Floor, Building A4, Block A, Fangxing Science & Tech.
Park, No.13 of BaoNan Road, Longgang District, Shengzhen, China.

THANK YOUfor your purchase !
If you have any issues or concerns, let us know at
3MN144900
US,EU & Others: spigen.support@spigen.com
KR: spigen119@spigen.com
We are Prepared and Ready to Solve
Your Problems!

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals