eta Ambo II Electric Meat Grinder User Manual
- June 9, 2024
- ETA
Table of Contents
eta Ambo II Electric Meat Grinder
INSTRUCTIONS FOR USE
Dear customer, thank you for purchasing our product. Keep these instructions
including the warranty, the receipt and, if possible, the box with the
internal packing.
SAFETY NOTICE
-
Carefully read the user‘s manual before putting the appliance into operation, see the illustrations and save the manual for future use. Consider the instructions in the user‘s manual as a part of the appliance and provide it to other users of the appliance.
-
Check that the voltage on the type label corresponds to the voltage in your electric power socket.
-
Do not insert the power plug into the electric power socket and do not pull it out of the electric power socket with wet hands or by pulling on the power cord!
-
Never use the appliance if the power cord or power plug are damaged, if it is not functioning correctly or if it has fallen on the floor and been damaged or if it has fallen into water. In such cases take the appliance to a professional service centre to verify its safety and correct function.
-
This appliance must not be used by children. Keep the device and its supply cord out of reach of children. The device may be used by persons with reduced physical or mental abilities or lack of experience and knowledge only if they are under supervision or they have been instructed about using the appliance safely and understand the potential dangers. Children must not play with the appliance.
-
If the power cord of this appliance is damaged, the cord must be replaced by the manufacturer, their service technician or by a similarly qualified person, this will prevent the creation of dangerous situation.
-
Always unplug the appliance from power supply if you leave it unattended and before assembly, disassembly or cleaning.
-
Before replacing accessories or accessible parts, which move during operation, before assembly and disassembly, before cleaning or maintenance, turn off the appliance and disconnect it from the mains by pulling the power cord from the power socket!
-
Handle the accessories very carefully, they are very sharp!
-
When the appliance is in operation, prevent pets, plants or insects to get in contact with it.
-
Always disconnect the appliance from the power socket if you will be leaving it without supervision.
-
CAUTION: Do not use the appliance with a program, time switch or any other part that turns the appliance on automatically as there is a risk of fire if the appliance is not covered or placed properly.
-
After finishing work and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
-
Do not leave the appliance in operation without supervision and supervise it for the entire time that food is being prepared!
-
The product is intended for home use and similar (in shops, offices and similar workplaces, in hotels, motels and other residential environments, in facilities providing accommodation with breakfast). It is not intended for commercial use!
-
Never submerge the appliance under water and do not wash under running water!
-
The appliance must not be used in damp or wet environment and in any environment with the danger of fire or explosion (spaces where chemicals, fuels, oils, gases, paints and other flammable or volatile materials are stored).
-
Use the appliance only in the working position in places, where there is no risk of it being knocked over and at a sufficient distance from sources of heat (e.g. fire stoves, electric/gas stoves, cookers, etc.), and wet surfaces (kitchen sinks, wash basins etc.).
-
Long hair, loose clothes or accessories and jewellery can get caught by the rotating parts of accessories. Make sure that your hair, clothes and accessories do not get into dangerous vicinity to the rotating parts!
-
Do not remove accessories when the drive unit is in operation.
-
Before removing accessories from the drive unit, allow the rotating parts to stop completely.
-
Do not turn on the appliance without any ingredients inside!
-
Do not insert accessories into any body cavities.
-
Never insert your fingers into the filling opening and do not use a fork, knife, spatula, spoon, etc. Use only the supplied pusher for this purpose.
-
Slightly push down the food by the stamper so that the appliance will not tilt or overturn.
-
Do not exceed the maximum operation time for the appliance, which is 5 minute.
Then allow the driving unit to cool down for at least 30 minutes. -
The appliance is equipped with thermal safety fuse which disconnects current supply incase of engine overloading. If it occurs, unplug the appliance and let the appliance getcooled.
-
Do not process frozen food.
-
Make sure that the power cord does not come into contact with the rotating part of the appliance.
-
Do not wind the power cord around the appliance; this will extend its life.
-
The power cord must not be damaged by sharp or hot objects, by an open flame and it must not be submerged under water.
-
Never place it on hot surfaces and do not leave it hanging over the edge of a table or a work bench. If the cord is brushed against or pulled by for example children the appliance may tip over or be pulled down and lead to serious injuries!
-
If the use of an extension cord is necessary, then it must not be damaged and must meet the valid norms in force.
-
Use the appliance only with accessories designed for this model.
The use of other accessories may present a danger for the user. -
Only use the appliance with original accessories from the manufacturer.
-
Use this appliance only for the purpose for which it was designed as specified in this user‘s manual. Never use the appliance for any other purpose.
-
WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.
-
All text in other languages and pictures shown on the packaging, or the product itself, are translated and explained at the end of this language mutation.
-
The manufacturer takes no responsibility for damages and injuries caused by the incorrect use of supplementary machines and accessories (e.g. ruining of foods, injury, cuts) and takes no responsibility arising from the warranty on the appliance in the case that the above safety notices were not followed.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A – Motor unit
- A1 – Shaft
- A2 – Handle
- A3 – Release button
- A4 – Power cord
- A5 – ON/OFF button
- A6 – SLOW button
- A7 – REVERSE button
B – Mincer
- B0 – Mincer body
- B1 – Spiral feeder
- B2 – Cutting blade
- B3 – Medium mincing disc
- B4 – Coarse mincing disc
- B5 – Nut
- B6 – Separator
- B7 – Adapter for smoked food
- B8 – Pusher
- B9 – Hopper
C – Grating attachment
- C0 – Attachment body
- C1 – Coarse grater
- C2 – Fine grater
- C3 – Cheese grater
- C4 – Thin slicing grater
- C5 – Pusher
PREPARATION AND USE
First remove all packaging materials, take out the grinderand all accessories. Then remove all adhesive foils, stickers and paper from the grinder and accessories. Before the first use, wash all parts, which will be in contact with food, in warm water with a mild detergent, thoroughly rinse in clear water and wipe dry or let dry. Put the assembled grinder with the selected attachments on a flat, stable, smooth and clean worktop. Provide sufficient free space for ventilation. The appliance openings allow free airflow for ventilation, and must not be covered or otherwise blocked. The feet must not be removed. Electric power socket must be easily accessible to allow easy disconnecting of the appliance in the case of emergency.
Control
Before switching the appliance on, plug the power cord A4 in the electrical
socket. Switch the grinder on/off by pressing A5 button. If you want to reduce
rotation speed during processing the food, press A6 button (if you push the
button again, the original rotation speed will restore). If you want to use
reverse run, first switch the grinder off by A5 button, and then press and
hold A7 button. After you finish processing, switch off the appliance by
pressing A5 button.
Meat Grinder
Safety hints and tips
- We recommend interrupting the operation from time to time, switch off the appliance and remove the food stuck on the attachments (or blocking the attachments).
- Never let the mincer running if the hopper is empty!
- Do not mince frozen meat.
- Attach the cutting blade B2 to the spiral feeder with B1 the cutting edges facing forward.
Assembly
Assemble the mincer according to the intended use (for meat, smoked food) and
mount it on the main motor unit – see Figure 1. Apply reverse procedure to
disassemble the mincer and to remove it from the motor unit head. When
removing the grinder, you have to push the release button A3 first.
- A) Meat mincing
The mincer can mince any type of meat, which is free of bones, tendons and skin. Mincing coarseness can be adjusted by using different mincing discs (B3, B4) with various sizes of openings. Cut the meat in advance into cubes of about 3x3x3 cm. Put bowl under the mincer to catch the minced meat. Put the meat cubes into the hopper so that the spiral feeder B1 can take them without being blocked, and slightly push the meat down, using the pusher B8. Proceeding like this will prevent the motor unit from becoming overloaded.
Tips
- Regularly check if the mincing disc openings are passable during the meat processing. If the disc openings get blocked while mincing meats of various consistency (for example bacon and liver), the juices may flow along the screw feeder shaft inside the motor unit of the mincer. Therefore pay maximum attention to ensure smooth flow of the processed food through the mincing disc. If the flow is blocked, immediately switch off the mincer, disassemble the mincer and clean all components.
- If the appliance is blocked, first switch it off and then use the reverse run function (A7 button) to release the food.
- B) Smoked foods (sausages, frankfurters), etc.
Put the minced meat into hopper B9. Use the pusher B8 to slightly push the meat inside the mincer. Soak the sausage casings in warm water (for about 10 minutes) to improve their elasticity. Then put it „arranged in folds“ on the outlet piece. Let 5 cm at the end of the casing hang freely, and tie up or skewer it. Put the prepared mixture into the hopper and slightly push it down using the pusher B8. Proceed as appropriate for the respective smoked food (for example sausages, short sausages, etc.) or white pudding.
Tips
- We recommend two persons for this procedure. One puts the mixture inside, and the other holds the casing in the proper position on the outlet adapter B7. When filling the casing, proceed so that no air can get inside.
- If the outlet opening of the smoked food adapter B7 gets blocked, switch off the motor unit, remove the attachment and clean it.
Adapter for slicing / grating of vegetables and fruits,
Safety hints and tips
- Never push down the grated/sliced fruits or vegetables by fingers! Move the food along the feed tube by the pusher, slowly, while pushing down slightly.
- Be careful when handling the graters. They employ very sharp blades.
- Never use the graters to process hard materials, for example ice cubes, coffee / cereal /corn grains, spices, etc.
- When processing a large amount of food, check if the food is not cumulating above and below the grater.
- If the grating adapter is blocked, switch off the motor unit, disassemble the adapter body and clean it.
Assembly
Assemble the adapter and mount it on the driving unit head according to Figure
- Apply reverse procedure to disassemble and remove the adapter from the driving unit head. When or removing the adapter, you have to push the release button A3 first.
Note
When graters are removed, they must be first partially rotated and then
unhooked from hooks.
Preparing the food
The attachments can be used for chopping, slicing, grating and scraping of
almost any type of fruits or vegetables. You can use the slicing/chopping
grater to process fruits, vegetables, cheese and food of similar structure.
The cheese greater is designed for processing hard cheeses and making bread
crumps.
Use
Put a suitable container under the grating adapter outlet. Chop the vegetables
into pieces of the size fit for putting them inside the grating adapter
feeding tube. Put the pieces into the adapter and slightly push by the pusher.
The processed food is going out from the outlet into the provided container.
Tipy
-
A small amount of food will remain on the grater after each use.
This is normal and does not establish a reason for filing a complaint. -
First remove peels if processing citrus fruits.
-
If you are chopping hard cheese or chocolate, work for a short time, because the food heats up, becomes softer and may get lumpy.
-
Before slicing cabbage, cut it into hunks and remove the cabbage stalks.
MAINTENANCE
Unplug the power cable from socket before any handling with the appliance!
Do not use rough and aggressive cleaning agents! Perform any cleaning of the
drive unit and the carrier only with wet rag with detergent. Wash other
accessories immediately after use in hot water with detergent. Work very
carefully when cleaning the knife!
Note that cutting edges of the knife and grinding discs shall not come into
contact with hard objects which blunt them and decrease their efficiency.
After washing and drying
out the components, we recommend applying cooking oil on the knife and plates.
Do not use dishwasher to clean metal parts! Some agents can tinge the
accessories
in some way. However, this has no influence on function of the appliance and
this tint usually disappears by itself after some time.Never dry plastic
mouldings above heat sources
(e.g. stove, electric cooker, gas cooker). Store the appliance on dry and
dust–free place out of reach of children and incapable persons.
Storage
Wind the power cord A4 inside the compartment at the rear side of the
appliance.
ENVIRONMENT
Printed signs of materials used for manufacture, packing, components and
accessories, as well as their recycling, are on all the pieces if their
dimensions enable it. The symbols on the product or in the accompanying
documentation mean that the used electric or electronic products must not be
disposed together with municipal wastes. Please, hand them over to the
collection points designed for their correct disposal, where they will be
accepted free of charge. By correct disposal of this product you can help to
preserve valuable natural resources and help to prevent possible negative
impacts to the environment and to human health, which could be the results of
incorrect waste disposal. For further details ask the municipal authorities or
the nearest collecting point. Penalties can be charged for incorrect disposal
of such wastes, according to national regulations.
If the appliance is to be put out of operation definitely, we recommend
cutting off the feeder cable, to disable its use.
TECHNICAL DATA
- Voltage (V) Shown on the type label of the appliance
- Input power (W) Shown on the type label of the appliance
- Weight (kg) approx. 5
- Protection class of the appliance II.
- Size of the product (mm) 210 x 300 x 135
- Input in off mode is < 0.50 W
- Acoustic noise level of 85 dB(A) re 1pW
The manufacturer reserves the right to change the technical specifications and
accessories for the respective models.
More extensive maintenance or maintenance requiring intervention in the inner
parts of the appliance must be carried out by professional service! Failure to
comply with the instructions of the manufacturer will lead to expiration of
the right to guarantee repair!
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS
MANUAL:
HOUSEHOLD USE ONLY. DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID DANGER OF SUFFOCATION, KEEP THIS PLASTIC BAG AWAY FROM BABIES AND
CHILDREN.
DO NOT USE THIS BAG IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THIS BAG IS NOT A
TOY.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>