spigen UTS35W OneTap Universal Wireless Car Charger User Manual
- June 9, 2024
- Spigen
Table of Contents
spigen UTS35W OneTap Universal Wireless Car Charger
Product Colour, Material & Finishing Specifications
Product Model| FC82| Brand| SA01| Product Type| | Description| UTS35W
Part Number| 3-608FC822000B0002| Job No.| QH-SMS-23005 V1.1(SA01-FC82)|
Revision| 1.1| Change Description|
Material| | Dimension| 65*95mm| Scale| 1：1| Tolerance|
Remark| | Original Designer| | Verifying| | Date| Date
Color| | Membrane| | | | |
Dashboard Pad Installation
Installation and Removal of Gel Cover
Wash dashboard pad with flowing water to reuse.
Lock
If only one grip is opens during use
Specifications
Modal: UTS35W
Input: 5.0V ⎓- 3.0A 9.0V ⎓- 222A 12.0V ⎓- 1.67A
Output: 5.0W, 7.SW, 70.0W, 15.0W
Dimensions: 75.0 x 115.6 x 69.3mm / 2.95 x 4.55 x 2.nin
Weight: 345.0g / 12.1oz
Caution
- For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately)
- Remove all metal plates or credit cards during wireless charging.
Note
- B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration: therefore, it can be used in all areas.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception. which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
(4) Consult the dealer or an experienced radio/ TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment com~ies with FCC radiation exposure limits set forth for an
uncontrolled environment This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
The following importer is the responsible party (for FCC matters only).
Spigen Inc. 997S Toledo Way #100, ltvine, CA 92618 USA
E-mail: spigen.support@spigen.com
Applicant/ Manufacturer Information
Applicant : Spigen Korea Co., Ltd.
Address : SpigenHQ A Dong, 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153,
Rep. of KOREA
Manufacturer : Shenzhen Wireless Technology Co., Ltd
Address: 301, Building A2., Block A. Fangxing Science & Tech. Park, No.
13 of BaoNan
Road, Longgang Community, Longgang Street. Longgang District, Shenzhen
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B) This device complies with lndusby Canada license ICES-003. Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that
may cause undesired operation of the device.
IC Radiation Exposure statement
RF exposure statement:
The equipment complies with IC Radiation exposure limit set forth for
uncontrolled environment. This equipment should be installed and operated with
minimum distance 10cm between the radiator and your body.
UK
This device can be used in Europe.
This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
Hereby, Spigen Korea Co., Ltd. declares that the product type UTS35W is in
compliance with following Directives: Radio Equipment Regulations 2017,
Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use
of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012. The full
text of the
UK declaration of conformity is available at the following internet address
https://www.spigen.com/
| Radiated H-Field | 11.36 dBuNm (@10m) |
|---|---|
| TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
US and Canada Customers Only
Distributed by Spigen. Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative: OBELIS S.A Bd. General Wahis, 531030 Brussels, Belgium +3227325954
UK Customer Only
Authorized Representative for UK JNMUK LIMITED
Address: V307 Vox Studios, 1-45 Durham Street Vauxhall, London,
SE11 SJH Tel : +44 20 8176 0793
Germany Customer Only (ProdSG)
Contact: HH Compliance Limited Block 3, Harcourt Centre,
Harcourt Road, Dublin 2, Ireland.
Manufacturer : Spigen Korea Co., Ltd. 3MN054420