spigen ITM12W OneTap Pro 3 15W Wireless Car Charger Airvent User Manual
- June 9, 2024
- Spigen
Table of Contents
spigen ITM12W OneTap Pro 3 15W Wireless Car Charger Airvent
Installation Guide
Installation
Adjust(Rotate Mount)
Instruction
- Only compatible with MagSafe Compatible iPhones.
- Places use MagSafe case if you choose to use a case.
- For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately).
- Remove all metal plates or credit cards during wireless charging.
- Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration therefore, it can be used in all arcos
Applicant / Manufacturer Information
Applicant Spigen Korea Co, Ltd.
Address: SpigcnHA Dong, 446, Bongcunsa-ro, Gangnam-gu, Scou, 06153, Rep of
KOREA
Manufacturer Shenzhen Wireless Technobgy Co., Ltd
Address 301, Building A2, Blbck A, Fangxing Science & Tech. Park, No, 13 of
BaoNan Road, Longgang Community, Longgang Street, Longgang District, Shenzhen
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received. including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment comples with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter. The following importer is the responsible party (for FCC matters
only). Spigen Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA Email:
[email protected]
IC Statement
This digital apparatus complies with CANICES-O0KB)/NMB-003(B) This device
complies with Industry Canada license ICES-O03. Operation is subject to the
following two conditions:
- This device may not cause interference.
- This device must accept any interference, inducing interference that may cause undesired operation of the device.
Specification
- Model ITM12W
- Input 24 5V/3A V/2.22A
- Output E4 5.0W. 75W 5.0W
- Dimensions 2.50 x 2.42x 2./9in
- Weight 84.69/29eoL
Declaration of Conformity
Hereby, Spigen Korea Co, Ltd declares that the product type “Spigen One Tap Pro 3 15W Wireless Car Charger Airvent ITM12W” is in compliance with Directive 2014/35/EU& 2014/53/EU & 201/65/EU. Spigen Korea Co, Ltd. 446, Bongeunsaro, Gangnam-gu, Seoul, 06153, Korea Hicrmit crklärt dic Spigen Korca Co, Ltd, dass das Produkt Typ”Spigen OncTap Pro 3 15W Wireless Car Charger Airvent ITM12W” mit den Richtinien 2014/35/EU & 2014/53/EU & 201/65/EU konform ist Spigen Korea Co, Ltd. 446. Bongeunsa-ro. Gangnam-gu. Seoul. O6153, Korea
UK
This device can be used in Europe. This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product. Declaration of Conformity Hereby. Spigen Korea Co., Ltd. declares that the product type ITM12W is in compliance with following Directives. Radio Equipment Regulations 2O17, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Sulbstances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address https://www.spigen.com/