spigen PF2009 PowerArc ArcField Magnetic Wireless Charger User Manual
- June 5, 2024
- Spigen
Table of Contents
Spigen PF2009 PowerArc ArcField Magnetic Wireless Charger
Instruction
Caution
20W USB-C PD Power Adapter is Recommended for high-speed wireless charging. USB Power Adapter is not included.
Cautions
- Do not exert excess force on the product.
- Do not disassemble the product or let it come into direct contact with heat or water.
- Be careful when using the product in a hot or humid environment as it may damage the circuit.
- Do not place magnetized chip cards (e.g. ID cards, credit cards) near the product as magnets may demagnetize the cards and cause them to malfunction.
- Do not place a foreign object between the charger and the iPhone as the magnetic force may weaken.
- Medical devices (e.g. pulse measuring device, hearing aid) may indirectly interfere with the product; keep them at least 20cm away from the product.
- Keep away from children.
- The product image herein is provided as an example and user’s guide for the portable high-speed wireless charger and may differ from the actual product.
- For smartphones that do not support wireless charging, you need to use a separate wireless charging patch or wireless charging case.
Do not pull on the built-in cable when detaching the wireless charger. Pulling hard on the cable will cause short circuits.
Specification
- Model : PF2009
- Input : DC 5.0V 1.5A, 9.0V 1.67A
- Output : 5.0W / 7.5W
- Dimensions (Not include Cable) : 62 x 62 x 6mm /2.44 x 2.44 x 0.24in
- Weight (Include Built-in Cable) : 47g / 1.66oz
FCC Part 15 Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
- CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
- Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
Technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
IC warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Note
B Class Equipment (Equipment for home use)
This product is mainly for home use with radio wave acceptability
registration; therefore, it can be used in all areas.