spigen ITS12W Wireless charger User Manual
- June 6, 2024
- Spigen
Table of Contents
ITS12W Wireless charger
User Manual
Product Model | LC18 | Brand | SA01 | Part number | 3-608LC182002B0001 |
---|---|---|---|---|---|
Product Type | 1 | Description | ITS12W | Job No | QH-SMS-21011 V1.1(LC18-SA01) |
Dimension | 70*95mm | Original Designer | 1 | Date | 2021.05.10 |
Scale | 01:01 | Technology | 105g | Verifing | 1 |
Revision | 1.1 | Change description | 2021.05.10 |
Spigen One Tap Pro Wireless Car Charger for MagSafe Compatible iPhone
Vent Clip + Swing Arm
Product Content
- Charging Pad
- Locking Bolt
- Vent Clip
- Swing Arm (optional)
✓ Only compatible with MagSafe Compatible iPhones
✓ Please use MagSafe case if you choose to use a case
Installation Guide
- Remove Locking Bolt
- vent Clip Assembly
- Install
- Adjust
- Charging
(Optional) Use without the swing arm
- Remove Locking Bolt
- Vent Clip Assembly
It May be used depending on your environment (avoid air conditioning/heater)
Caution
- Only compatible with MagSafe compatible iPhones.
- Please use the MagSafe case if you choose to use a case.
- For optimal charging, pair with the 20W or higher USB-C Power Adapter (sold separately).
- Remove all metal plates or credit cards during wireless charging.
Note
B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.
Specifications
- Model: 1S12W
- Input: DC5.0W2.0A, 9.OW 674
- Output: 5.0w 75w
- Dimensions: 60.6x 60.6 69mm / 2.38x 2.38×2.7in
- Weight: 77.89 /2.740
FCC Part 15 Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions (D) This device may not cause harmful
interference, and (2)this device must accept an intertoronee received,
including intertoronee that may Cause undesired operation.
*CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product Note his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part IS of the CC Rules These limits are designed to provide reasonable protection 098int harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed ad used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on the user is encouraged tr to correct them into thrones by one or more of the following measures
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
This equipment complies with CC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 2Ocm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
ISED Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
IC warning
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device.