spigen UTS12W OneTap Universal Wireless Car Charger User Manual

June 9, 2024
Spigen

spigen-LOGO

spigen UTS12W OneTap Universal Wireless Car Charger

spigen-TS12W-OneTap-Universal-Wireless-Car-Charger-
PRODUCT

Product Colour, Material & Finishing Specifications

  • Product Model: FC82
  • Part Number: 3-608FC822000B0001
  • Material
  • Remark
  • Color
  • Brand: SA01
  • Job No: QH-SMS-23004 V1.0 (SA01-FC82)
  • Dimension: 65*95mm
  • Membrane:  105g
  • Product Type
  • Revision: 1.0
  • Scale:1: 1
  • Description: UTS12W
  • Change Description
  • Tolerance
  • Date: 2023.2.14

Installation

spigen-TS12W-OneTap-Universal-Wireless-Car-Charger-
FIG-1

If only one grip is opened during usespigen-TS12W-OneTap-Universal-Wireless-
Car-Charger-FIG-2

Specifications

  • Model: UTS12W
  • Input: 5V-3.0A, 9V=2.22A, 12V=1.67A
  • Output: 5.0W, 7.5W, 10.0W, 15.0W
  • Dimensions: 75.0 x 115.6 x 69.3mm 2.95 x 4.55 x 2.72in
  • Weight: 156.0g5.50z

Caution

  • For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately).
  • Remove all metal plates or credit cards during wireless charging.

Note

  • B: Class Equipment (Equipment for home use)
  • This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.

FCC Statement

This devIce complies with Part l5 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measuress

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit lifferent from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/ TV technician for help.
  • CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
  • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
  • The following importer is the responsible party (for FCC matters only).
  • Spigen Inc. 9975 Toledo Way # 100, Irvine, CA 92618 USA
  • E-mail : spigen.support@spigen.com

IC Statement

  • This digital apparatus complies with CAN ICES-O03(B)/NMB-O03(B)
  • This device complies with Industry Canada license ICES-0O3.
  • Operation is subject to the following two conditions
  • This device may not cause interference.
  • This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement

RF exposure statement:

  • The equipment complies vwith IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.

Declaration of Conformity

  • Hereby, Spigen Korea Co., Ltd declares that the product type “Spigen OneTap Universal
  • Wireless Car Charger UTS12N” is in compliance with Directive 2014/30/EU & 2014/53/EUU & 2011/65/EU & 2014/35/EU.

UK

  • This device can be used in Europe.
  • This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity
  • Hereby, Spigen Korea Co., Ltd. declares that the product type UTS12W is in compliance with following Directives: Radio Equipment Regulations 20O17, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the
  • UK declaration of conformity is available at the following internet address https://www.spigen.com/
  • Radiated H-Field -11.36 dBuA/m (@10m)
  • TX/RX Frequency Range: 110-148kHz(Only for EU&UK)

US and Canada Customers Only

  • Distributed by Spigen, Inc. in Irvine, CA 92618, USSA

EU Customer Only

  • Authorized Representative: OBELIS S.A Bd. Général Wahis, 53 1030 Brussels, Belgium +3227325954

UK Customer Only

  • Authorized Representative for UK: JNMUK LIMITED
  • Address: V307 Vox Studios, 1-45 Durham Street Vauxhall, London,
  • SE1 5JH Tel: +44 20 8176 0793

Germany Customer Only (ProdSG)

  • Contact: HH Compliance Limited Block 3, Harcourt Centre,
  • Harcourt Road, Dublin 2, Ireland.
  • Manufacturer: Spigen Korea Co., Ltd. 3MNO56640

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals