Spigen PF2203 ArcField Wireless Charger User Manual

May 15, 2024
Spigen

Spigen PF2203 ArcField Wireless Charger

Spigen-PF2203-ArcField-Wireless-Charger-product

Product Information

Specifications

  • Input: TYPE-C-PD Input 5V/3A, 9V/3A, 12V/2.5A, 15V/2A
  • Outputs:
    • Output1: Wireless charger 5W/7.5W/10W/15W
    • Output2: Wireless charger 5W
    • Output3: Wireless charger 5W
  • Total Output: 25W
  • Input under-voltage protection
  • Output over-current protection
  • Compliant with CE, FCC, MFI

Product Usage Instructions

Operation Procedures

  • Charge the power bank:
1. Connected to the charger.
  • Charge the devices:
1. Place the device on the wireless charger for charging.
  * Wireless charger 5W
  * Magsafe 5W/7.5W/10W/15W
  * Wireless charger 5W

Note: Operation Notes:

  1. Do not place the product close to high temperatures like ovens or candles.
  2. Avoid contact with liquid products such as swimming pools or bathtubs.
  3. Do not use corrosive detergent cleaning products.
  4. Do not modify or disassemble the product.

FAQ

  • Q: What should I do if the product is exposed to high temperatures?
    A: Avoid exposing the product to temperatures outside the range of 0 to 40 degrees Celsius to prevent damage.

  • Q: Can the product be used at high altitudes?
    A: The product is recommended for use below 2000m altitude.

DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating, or using this product. Please keep this manual for future reference.

INTRODUCTION

The fashion design, the TYPE – C – PD charging input design, this product keeps your digital devices. it supports the magnetic suction wireless charging output, specifically for your business travel, meetings, adventure, camping, travel, and so on.

FEATURES

  • TYPE-C-PD Input: 5V/3A,9V/3A,12V/2.5A,15V/2Adc
  • Outputs:
    • Output1: Wireless charger 5W/7.5W/10W/15W
    • Output2: Wireless charger 5W
    • Output3: Wireless charger 5W
  • Total output: 25W
  • Input under-voltage protection
  • Output over-current protection
  • Compliant with CE, FCC, MFI

SPECIFICATIONS

Input TYPE-C-PD: 5V/3A,9V/3A,12V/2.5A,15V/2Adc
Output1 Wireless charger 5W
Output2 Wireless charger 10W
Output3 TYPE-C 5W output
Over Current Protection Yes
Over Voltage Protection Yes
Short circuit Protection Yes
Over Temperature Protection Yes
Ripple And Noise ≤200mVp-p@9V/12V/15V
Operating Temperature Range 0~ 40°C
Storage Temperature Range -5~45°C
Operating Humidity 20~90%RH
Storage Humidity 45~85%RH
Color White
  Size(LWH)
Weight 305g±10g
Efficiency ≥85%
Certification CE, FCC, MFI
User Manual English Version

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

  • Main unit×1
  • User Manual×1

PRODUCT SHOW

Spigen-PF2203-ArcField-Wireless-Charger-fig- \(1\)

OPERATION

Operation Procedures

  • Charge the power bank
    • Connected to the charger
  • Charge the devicesSpigen-PF2203-ArcField-Wireless-Charger-fig- \(3\)

Note:

Operation Notes

  1. Don’t let the product close to the fire, like an oven, candles, or other high temperatures.
  2. Don’t let the noise infiltrate liquid products, such as swimming pools, bathtubs, etc.
  3. Do not use corrosive detergent cleaning products.
  4. Do not remove, modified products.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE :
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

NOTE:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Refer to KDB 784748 Anner A section A.5:

  • Max. Electric Field Emissions: 6.25V/m
    Max. Magnetic Field Emissions: 0.48A/m

  • The maintenance of the system is the responsibility of the manufacturer.

  • To prevent interference, the product should be as far away from devices operating at the same frequency as possible.

RF exposure statement
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

Caution:
Use the Product in an environment with a temperature Between 0℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitude

For the following equipment:

  • Product Name: ArcField Wireless Charger

  • Brand Name: Spigen

  • Model No.: PF2203
    Spigen Korea Co., Ltd.

  • E-mail: shwoo@spigen.com

hereby declares that this [Name: ArcField Wireless Charger, Model: PF2203] complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.

The product shall only be connected to a USB interface of version USB2.0 and that the connection to a power USB is allowed.

  • This product is intended for sale and application in a business environment.
  • The adapter shall be installed near the equipment and shall be easily accessible.

Only can use the adapter as below:

  • Power Adapter Model: PD30E PD30E-1TNC
  • Input: 100 100- 240Va.c. 50/60Hz 1.0A Max
  • Output: 5.0Vd.c. 3.0A, 9.0Vd.c. 3.0A, 15.0Vd.c. 2.0A, 20.0Vd.c. 1.5A Total 30.0W Max

DONGGUAN CE LINK LIMITED
The plug is considered as a disconnect device of the adapter.

  • RED Article 10 2
    This product can be used across EU member states

  • RED Article 10 10
    The product is a class 1 product with no restrictions

The RF distance between the body and the product is 20 m.

  • Frequency Range:
    • Transmitter 1(Phone): 115kHz-205kHz
    • Transmitter 1(Phone): 360kHz
    • Transmitter 2(Watch): 326.5kHz
    • Transmitter 2(Watch): 1.778MHz
    • Transmitter 3(Earphone): 115kHz-205kHz
  • Radiated H-Field: 19.96dBuA/m(@3m)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals