spigen ITM35W OneTap Pro 3 15W Wireless Car Charger Dashboard User Manual
- June 9, 2024
- Spigen
Table of Contents
ITM35W
Spigen OneTap Pro 3
15W Wireless Car Charger Dashboard for MagSafe Compatible iPhone
User Manual
ITM35W OneTap Pro 3 15W Wireless Car Charger Dashboard
- Dashboard Pad Installation
- Installation and Removal of Gel Cover Wash dashboard pad with flowing water to reuse.
Caution
- Only compatible with MagSafe Compatible iPhones.
- Please use MagSafe case if you choose to use a case.
- For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately).
- Remove all metal plates or credit cards during wireless charging.
Note
- B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
The following importer is the responsible party (for FCC matters only). Spigen
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B) This device complies with Industry Canada license ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
RF exposure statement: The equipment complies with IC Radiation exposure limit
set forth for uncontrolled environment. This equipment should be installed and
operated with minimum distance 10cm between the radiator and your body.
Specifications
| Model | ITM35W |
|---|---|
| Input | 5V/3A 9V2.22A |
| Output | 5.0W, 7.5W, 15DW |
| Dimensions | 74.8 x 91.4 x 212.0mm / 294 x 3.59 x 9.34in |
| Weight | 272.0g / 9.5907 |
Declaration of Conformity
Hereby, Spigen Korea Ca, Ltd declares that the product type “Spigen OneTap Pro
3 Wireless Car Charger Dashboard ITM35W” is in compliance with Directive
2014/35/EU & 2014/53/EU & 2011/65/EU
Spigen Korea Co., Ltd. 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Korea
Riermit erklart die Spigen Korea Co., Ltd, dass das Produkt Typ “Spigen OneTap
Pro 3 Wireless Car Charger Dashboard ITM35W” mit den Richtlinien 2014/35/EU &
2014/53/EU & 2011/65/EU konform ist
Spigen Korea Co, Ltd. 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Korea
This device can be used in Europe.
This device was tested for uncontrolled environment operations. To comply with
RF exposure requirements, a minimum separation distance of 20cm must be
maintained between the user’s body and the product.
Declaration of Conformity Hereby, Spigen Korea Co., Ltd. declares that the
product type ITM35W is in compliance with following Directives: Radio
Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the UK declaration of
conformity is available at the following Internet address :
https://www.spigen.com/
| Radiated H-Field | -25.86 dBuA/m ( al0m) |
|---|---|
| TX/RX Frequency Range | 110-148kHz(Only for EU&UK) |
| Radiated H-Field | -18.94 dBuA/m (©10m) |
| TX/RX Frequency Range | 360kHz(Only for EU&UK) |
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative : OBELIS S.A Bd. General Wahis. 53 1030 Brussels,
Belgium +3227325954
UK Customer Only Authorized Representative for UK: JNMUK LIMITED
Address : V307 Vox Studios, 1-45 Durham Street Vauxhall, London, SE11 SJH
Tel : +44 20 8176 0793
Germany Customer Only (ProdSG)
Contact : HH Compliance Limited Block 3, Harcourt Centre, Harcourt Road,
Dublin 2, Ireland.
Manufacturer : Spigen Korea Co., Ltd.
3MN102240
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>