spigen PF2102 ArcField Wireless Charger User Manual
- June 5, 2024
- Spigen
Table of Contents
Spigen ArcField
Wireless charger
User Manual
PF2102
intructions
USB Power Adapter is not included
Device is not included
Charging
This product can be used with a Wall Charger with an output of 9V or higher (Power Delivery 3.0 25.0W or higher)
LED Indicator Display
| Status | LED |
|---|---|
| Initial Power-on | Red – Green – Orange – Off |
| On Standby | Turn off |
| While Charging | Red turn on |
| When Foreign Material (Metal) Is Detected | Red Flash |
| Input Power Error (Low Voltage, Overvoltage) | Red Flash |
*When foreign material (metal) is detected: Check to see if there is any foreign material (metal) stuck between the smartphone and the wireless charging pad.
Important Safety Instructions
- Do not exert excess force on the product.
- Do not disassemble the product or let it come into direct contact with heat or water.
- Be careful when using the product in a hot or humid environment as it may damage the circuit.
- A magnet may cause the product to break or malfunction; do not place magnetic chip cards (e.g. ID cards, credit cards) near the product.
- Medical devices (e.g. pulse measuring device, hearing aid) may indirectly interfere with the product; keep them at least 20cm away from the product.
- Keep away from children.
- The product image herein is provided as an example and user’s guide for the portable high-speed wireless charger and may differ from the actual product.
- For smartphones that do not support wireless charging, you need to use a separate wireless charging patch or wireless charging case.
Note
B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.
Specifications
| Model | PF2102 |
|---|---|
| Input | 9.0V 2.77A |
| Output | 5.0W / 7.5W / 10.0W / 15.0W |
| Dimensions (Cable Not Included) | 100.0 x 115.0 x 70.0mm 3.94 x 4.53 x 2.76in |
| Weight (Cable Not Included) | 139g / 4.9oz |
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B) This device
complies with Industry Canada license ICES-003. Operation is subject to the
following two conditions: (1) This device may not cause interference. (2) This
device must accept any interference, including interference that may cause
undesired operation of the device.
IC Radiation Exposure Statement
CAN RSS-216 / CNR-216
Does this equipment comply with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment? This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The following importer is the responsible party (for FCC matters only). Spigen
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA E-mail:
[email protected]
Declaration of Conformity Hereby, Spigen Korea Co., Ltd declares that the
product type “Spigen ArcField Wireless Charger PF2102” is in compliance with
Directive 2014/30/EU & 2014/53/EU & 201I/65/EU & 2014/35/EU. Spigen Korea Co.,
Ltd. 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153,
Korea
Customer Service
24- month limited warranty
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given under this limited warranty.
Thank you for your purchase! If you have any issues or concerns, let us know
at
US, EU & Others: [email protected]
KR: [email protected]
We are Prepared and Ready to Solve Your Problems!
The US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative: OBELISK S.A Bd. General Ways, 53 1030 Brussels,
Belgium +3227325954
Germany Customer Only (ProdSG)
Contact: HH Compliance Limited Block 3, Harcourt Centre, Harcourt Road,
Dublin 2, Ireland.
Manufacturer: Spigen Korea Co., Ltd.
3MN086340