BlueDiamond 37392 Connect Keyboard and Mouse Combo User Manual
- June 14, 2024
- BLUEDIAMOND
Table of Contents
BlueDiamond 37392 Connect Keyboard and Mouse Combo
Connect Combo – French
- Brand: BlueDiamond
- SKU: 3739
INSTRUCTION
Thank you for buying the MS wireless set. In your set, you will find a keyboard, mouse, nano receiver, and 3xAAA batteries.
Fitting batteries in the keyboard
Turn the keyboard upside down and remove the battery compartment cover by
putting pressure on the recess and carefully pushing the cover upwards. Insert
the batteries (1 battery, type, 1.5 V) in the battery compartment of the
keyboard. Ensure that the battery poles correspond to the “+” and”-” markings.
Slide the battery compartment cover back on until it locks into place.
Fitting batteries in the mouse
Turn the mouse upside down and remove the battery compartment cover by putting
pressure on the recess and carefully pushing the cover upwards. Insert the
battery (type AAA x 2, 1.5 V) in the battery compartment of the mouse. Ensure
that the battery poles correspond to the “+” and “-” markings. Slide the
battery compartment cover back on until it locks into place.
USING KEYBOARD AND MOUSE
Connecting the receiver Turn the computer On and insert the USB Nano receiver
in the corresponding USB socket of your PC. Position both the keyboard and
mouse so they are comfortable to use. Ensure that both the keyboard and mouse
are less than 10m from the USB receiver dongle.
Mouse switch On/Off
Move the switch to the ON position when you want to use a mouse. When you
won’t use the mouse for some time, turn the switch to the OFF position. This
way you will save energy consumption.
TROUBLESHOOTING
If the mouse and keyboard stop working please try the following:
- Check the polarity (+/-) on the batteries, maybe they are not inserted correctly.
- Change batteries for new ones if necessary.
- If you are mouse is not working well, try to use it on the mouse pad.
- Make sure the USB Receiver is plugged into a USB and the computer is on.
- Connect the receiver to the USB port and press the mouse’s middle & right buttons for about 5 seconds and release. The mouse will move the onscreen cursor to indicate a successful connection.
- Press the ESC+ = keys on the keyboard for another 5 seconds. The battery low indicator will flash to indicate a connection.
Cautions:
- Read all instructions carefully and keep this manual for future reference. Please install the appliance with the instruction guide to use.
- Risk of explosion if the battery is replaced by an incorrect type and the used batteries are according to the instructions.
- Do not use water, detergents, abrasive cleaning liquids, or chemical agents to clean the appliance.
- Before you clean the appliance, take the battery out.
- If the appliance is not used for a long time, please take the battery out.