spigen ArcField PF2201 Flex Wireless Charger User Manual
- June 9, 2024
- Spigen
Table of Contents
spigen ArcField PF2201 Flex Wireless Charger
INSTRUCTION
CHARGING
LED Indicator Display
- Status: LED
- Initial Power-on Red: Green Off
- On Standby Turn off
- While Charging: Red turn on
- When Foreign Material: Red Flash
- (Metal) Is Detected: Input Power Error
- Red Flash: (Low Voltage, Overvoltage)
When foreign material (metal) is detected
Check to see if there is any foreign material (metal) stuck between the
smartphane and the wireless charging pad.
Important Safety Instructions
-
Do not exert excess force on the product.
Do not disassemble the product or let it come into direct contact with heat or water. -
Be careful when using the product in a hot or humid environment as it may damage the circuit.
-
A magnet may cause the product to break or malfunction; do not place magnetic chip card (eg. ID cards, credit cards) near the product.
-
Medical devices (eg. pulse measuring device, hearing aid) may indirectly interfere With the product; keep them at least 20cm away from the product.
-
Keep away from children.
- Ihe prOduct image herein is provided as an example and user s guide for the portable high-speed wireless charger and may difter from the actual product.
- For smartphones that do not support wireless charging, you need to use a separate wireless charging patch or wireless charging case.
Note
Class Equipment (Equipment for home use) This product is mainly for home use
with radio wave acceptability registration; therefore, it can be used in all
areas.
SPECIFICATION
- Model: PF2201
- Input: 9V 2.77A
- Output: 5.0W/7.5W/ 10.0W/15.0W
- Dimension: 143.5 x 70.5 x 18.Omm 5.65 x 2.78 x 0.71in
- Weight: 165.0g/5.8202
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:
- Reoriernt or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dlifferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The following importer is the responsible party (for FCC matters only). Spigen Inc. 9975 Toledo Way #10O, IIvine, CA 92618 USA E-mail: Spigen.support@spigencom
Declaration of Conformity
Hereby, Spigen Korea Co., Ltd declares that the product type “Spigen ArcField Flex Wireless Charger PF2201” is in compliance with Directive 2014/30/EU & 2014/53/EU & 2011/65/EU &2014/35/EU. Spigen Korea Co., Ltd. 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Korea Hiermit erklärt die Spigen Korea Co., Ltd, dass das Produkt Typ “Spigen ArcField Flex Wireless Charger PF2201’mit den Richtlinien 2014/30/EU & 2014/53/EU & 201/65/EU & 2014/35/EU konform ist Spigen Korea Co, Ltd. 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Korea
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative: OBELIS S.A Bd. Général Wahis, 53 1030 Brussels,
Belgium +3227325954
UK Customer Only
Authorized Representative for UK: JNMUK LIMITED
Address: V307 Vox Studios, 1-45 Durham Street Vauxhall, London,
SEl1 5JH Tel: +44 20 8176 0793
Germany Customer Only (ProdS6)
Contact HH Compliance Limited Block 3, Harcourt Centre, Harcourt Road, Dublin
2, Ireland.