ITS13WC Spigen OneTap Pro 3 Cryomax Wireless Car Charger User Manual
- June 16, 2024
- Spigen
Table of Contents
**ITS13WC Spigen OneTap Pro 3 Cryomax Wireless Car Charger User Manual
**
Product Contents
- Charging Pad
- Locking Bolt
- Vent Clip
- Only compatible with Massif Compatible iPhones
- Please use Massif case if you choose to use a case
Installation Guide
-
Install
-
Charging
Caution
- For optimal charging, pair with the 20.0W or higher USB-C Power Adapter (sold separately).
- Remove all metal plates or credit cards during wireless charging.
Note
- B Class Equipment (Equipment for home use)
- This product is mainly for home use with radio wave acceptability registration; therefore, it can be used in all areas.
Specifications
- Model : ITS13WC
- Input : 5V⎓2.0A, 9V⎓1.67A
- Output : 5.0W, 7.5W
- Dimensions : 76.00 x 83.10 x 96.20mm / 2.99 x 3.27 x 3.78in
- Weight : 145.80g / 5.14oz
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the
following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuitdierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipmen
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
The following importer is the responsible party (for FCC matters only).
SpigenHQ Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B) This device complies with Industry Canada license ICES-003. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
CAN RSS-216 / CNR-216
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 10cm between the
radiator and your body.
Declaration of Conformity
Hereby, SpigenHQ Korea Co., Ltd declares that the product
type “SpigenHQ Onita Pro 3 Croma Wireless Car Charger Ardent Hook ITS13WC” is
in compliance with Directive 2014/30/EU & 2014/53/EU & 2011/65/EU &
2014/35/EU.
SpigenHQ Korea Co, Ltd. SpigenHQ A Dong, 446, Bongeunsa-ro, Gangnam-gu, Seoul, 06153, Rep. of KOREA
UK
This device can be used in Europe. This device was tested for uncontrolled
environment operations. To comply with RF exposure requirements, a minimum
separation distance of 20cm must be maintained between the user’s body and the
produce
Declaration of Conformity
Hereby, SpigenHQ Korea Co., Ltd. declares that the product type ITS13WC is in
compliance with following Directives: Radio Equipment Regulations 2017,
Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the UK declaration of conformity is
available at the following internet address :
https://www.spigen.com/
| Radiated H-Field | 3.1 dBuA/m(@10m) |
|---|---|
| TX/RX Frequency Range | 110-148kHz(Only for EU&UK |
US and Canada Customers Only
Distributed by SpigenHQ, Inc. in Irvine, CA 92618, USA
EU Customer Only
Authorized Representative : OBELIS S.A Bd. General Wahid, 53 1030 Brussels,
Belgium +3227325954
UK Customer Only
Authorized Representative for UK : JNMUK LIMITED Address : V307 Vox Studios,
1-45 Durham Street Vauxhall, London, SE11 5JH Tel : +44 20 8176 0793
Germany Customer Only (Prods)
Contact : HH Compliance Limited Block 3, Harcourt Centre, Harcourt Road,
Dublin 2, Ireland.
Manufacturer : Manufactured for SpigenHQ Korea by Shenzhen Power QI
Technology Co., Ltd
Address : 2nd Floor, Building A4, Block A, Flanging Science & Tech. Park,
No.13 of Boann Road, Longing District, Shenzhen, China.
for your purchase !
If you have any issues or concerns, let us know at
US,EU & Others: spigen.support@spigen.com KR: spigen119@spigen.com
We are Prepared and Ready to Solve Your Problems!
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>