WALI 1330LM-ES Mount for Echo Show 15 Instruction Manual
- June 16, 2024
- WALI
Table of Contents
WALI 1330LM-ES Mount for Echo Show 15
UNPACKING INSTRUCTIONS
- Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
- Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged . Do not use damaged or defective parts .
- Carefully read all instructions before attempting installation .
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before beginning the installation , and carefully follow all instructions contained herein. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
- If you don’t understand these directions or have any doubts about the safety of the installation.
- If you are uncertain about the nature of your wall , consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction . We hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect mounting , or incorrect use of this product.
Supplied Parts List
-
(1) Wall Plate & Articulating Arms-a
-
(1) VESA Plate-b
-
(1) Wrench-c
-
(2) M4x6 Bolt-d
-
(4) M4 Spacer-e
-
(4) M4x12 Bolt-f
-
(4) M4x30 Bolt-g
-
(2) Bolt Cover-h
-
(2) Lag Bolt Washer-i
-
(2) Lag Bolt-j
-
(2) Concrete Anchor-k
-
(3) Cable Tie-l
-
(1) Allen Key-m
WARNING
CAUTION!
This wall mount bracket must be securely attached to the vertical wall. If the mount is not properly installed it may fall, resulting in possible injury and/or damage.
Tools Required
- 4mm Drill Bit
- Phillips Screwdriver
- 10mm Masonry Bit
- Carpenter’s Level
Note: The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting hardware for the application.
Installation Instructions
Step 1 Install the Wall Plate to the Wall
Brick Mount
Wood Mount
Step 2 Attach VESA Plate to the Mounting Hole
Step 3 Attach VESA Plate to the Socket on the Articulating Arm
Step 4 Adjust the Tilting Angle and Attach the Bolt Cover
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>