OPT7 Redline F150 Easy Connect Expansion Adapter User Manual

OPT7 Redline F150 Easy Connect Expansion Adapter

Redline Expansion Adapter
Specifications:

• Compatible with 2019+ Silverado/Sierra 1500 models
• Plug-and-play style for easy installation
• No cutting or splicing of factory harnesses required
• Dimensions: 11.81″ x 23.62″ x 47.24″

Installation

1. Step 1:
   Locate your vehicle’s OEM wiring harnesses #L and #R, which are located behind the rear bumper and near the spare tire. Refer to Figure 1 for visual guidance.

2. Step 2:
   Lightly press the latch on the connector to release the OEM wiring harness. See Figure 2 for reference.

3. Step 3:
   Read the wiring instructions below carefully to identify the signal locations represented by the Connector/Wiring.

   • ODM WIRING HARNESS G – Right Passenger Side
   • ODM WIRING HARNESS Y – Left Driver’s Side
   • White = Hard Wire into Redline Tailgate Light Bar
   • Green = Right Turn & Brake
   • Yellow = Left Turn & Brake
   • Brown = Tail Lights
   • White = Ground

4. Step 4:
   Connect the Redline Easy Connect Expansion Adapter Harness to the male and female connectors of the vehicle, as shown in Figure 4. Repeat this step for the other side.

5. Step 5:
   Use zip ties to secure the flat 4PIN trailer connector and reverse wire in place along the inner bumper.

6. Step 6:
   Finally, connect the available tailgate light bar to the 4PIN trailer connector. Hardwire the reverse wire on the light bar directly into the reverse tail lights for full functionality.

FAQ:

1. Q: Is this expansion adapter compatible with other truck models?
   A: No, this expansion adapter is specifically designed for use with 2019+ Silverado/Sierra 1500 models.

2. Q: Do I need to cut or splice my factory harnesses during installation?
   A: No, the Redline Easy Connect Expansion Adapter Harness provides a plug-and- play style installation without the need for cutting or splicing.

REDLINE EASY CONNECT EXPANSION ADAPTER

FOR 2019+ SILVERADO/SIERRA 1500
Hello Fellow OPT7-ites, Introducing the Redline Easy Connect Harness to Flat 4-Pin Extension Adapter Harness The OPT7 Redline Easy Connect Expansion Adapter Harness is purpose-built to be used as a trailer accessory for 2019+ Silverado/Sierra 1500 models. It provides a plug-and-play style that allows you to quickly ,seamlessly and virtually hidden installation without cutting or splicing your factory harnesses.

Installation

1. Step 1
   First, locate your vehicle’s OEM wiring harnesses #L,#R (located behind the rear bumper and near the spare tire) as shown in Figure 1.

2. Step 2
   Then lightly press the latch on the connector to release the OEM wiring harness as shown in Figure 2.

3. Step 3
   To make it easier for you to identify the signal location represented by the Connector/Wining. Please read the wiring instructions below carefully before commencing any work.

4. Step 4
   Grab the Redline Easy Connect Expansion Adapter Harness and connect it to the male and female(see fig. 1) connectors of the vehicle as shown in Figure 4 . Then repeat the same steps for the other side.

5. Step 5
   Use some zip ties to secure the flat 4PIN trailer connector and reverse wire in place along the inner bumper.

6. Step 6
   Finally, connect the available tailgate light bar to the 4PIN trailer connector and the reverse wire on the light bar to hardwire directly into the reverse tail lights for full functionality.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>