THE GALLEY IWA-4-S-TT-WA Ideal ThinTop WashStation 4S Instructions

THE GALLEY IWA-4-S-TT-WA Ideal ThinTop WashStation 4S

Ideal ThinTopTM WashStationTM 4S

Specifications

• Model: IWA-4-S-TT-WA
• Material: American Black Walnut / Graphite Resin+
• Single bowl
• Users: 1
• Wash Tools included: Four
• Galley Tap recommended: One
• Outside dimensions: 45 1/2 x 19 1/2 x 11 1/16
• Interior dimensions: 44 x 18 x 10 3/4
• Countertop cutout: 44 x 18
• Basin area: 44 x 16
• Minimum cabinet size: 48 or 120cm

Basin (KSO-4-S-TT-SS)

• Material: 16GA 316L stainless steel
• Indoor/outdoor use
• SilentArmorTM sound reduction technology
• Angel finish
• Three tier design
• StarTM groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified
• cUPCTM certified

Wash Tools included (WKT-4T)

• Upper Tier Drying Rack 9 1/4 x 18 DR-09-U-xx
• Lower Tier Wash Caddy 6 x 17 WC-06-L-xx
• Lower Tier Wash Bowl 12 x 17 WB-12-L-xx
• Upper Tier Utensil Caddy 6 x 18 UC-06-U-xx
• Cover set UD-4-2P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin

Customize Your Galley

• Add 7-12 length
• Add 1-6 length
• Add 18 DryDock
• Add 12 DryDock
• Apron front
• 9 depth
• Center drain
• WorkTopTM
• *Color coded labels available

Specifications | Right Hand Drain Orientation

• Tap Hole Specifications
• Outside Dimension: 45 1/2
• Cutout Dimension: 44
• Inside Dimension: 18

Suggested Galley Tap Placement Guide

• Suggested maximum inside corner radius of countertop cutout: 3/8 T
• Galley Tap 1 3/8 min to 1 1/2 max hole diameter
• Center Tap hole diameters 2 behind cutout
• Note: Galley Hot & Cold Tap requires a minimum 8 clearance to center if installed to the right of the Galley Tap
• Note: Tap Placements are for right hand or left hand drain orientation

Countertop Cutout Plan

• C.O. 44 (1118 mm)
• I.D. 44 (1118 mm)
• CABINETS ARE TYPICALLY CUSTOM MADE FOR GALLEY DIMENSIONS. FOR EXISTING CABINETS, TRIM INTERIOR BULKHEADS APPROX. 11 (280 mm) TO CLEAR SINK DEPTH.
• 48 (1219 mm) (CABINET LENGTH)

Stainless Steel Compliance

• ASME A112.19.3-2008/CSA B45.4-08
• WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER IS ACCEPTED.
• DWG and DXF templates available on our website: TheGalley.com/specification-library
• Questions? For additional assistance, please contact The Galley’s Customer Care Department at 800.375.4255

FAQ

• Q: Can this product be used outdoors?
  A: Yes, the basin is made from 16GA 316L stainless steel and is suitable for indoor and outdoor use.

• Q: What is the warranty on the basin?
  A: The basin comes with a Limited Lifetime Warranty.

• Q: Are there different color options available?
  A: Yes, the product is available in American Black Walnut, Graphite Resin+, Graphite Wood Composite, Natural Golden Bamboo, Exclusive Gray Resin, and Designer White Resin.

• Q: Can I customize the galley?
  A: Yes, you can customize the galley by adding length, adding a DryDock, or opting for an apron front. Color coded labels are also available.

Ideal ThinTop™ WashStation™ 4S SPECIFICATIONS

• IWA-4-S-TT-WA
  • American Black Walnut / Graphite Resin+
• IWA-4-S-TT-GT
  • Graphite Wood Composite / Graphite Resin+
• IWA-4-S-TT-BA
  • Natural Golden Bamboo / Exclusive Gray Resin+
• IWA-4-S-TT-GR
  • Exclusive Gray Resin* / Resin+
• IWA-4-S-TT-WH
  • Designer White Resin* / Resin+

Wash Tools included (WKT-4T)

• (1) Upper Tier Drying Rack 9 1/4″ x 18″ DR-09-U-xx
• (1) Lower Tier Wash Caddy 6″ x 17″ WC-06-L-xx
• (1) Lower Tier Wash Bowl 12″ x 17″ WB-12-L-xx
• (1) Upper Tier Utensil Caddy 6″ x 18″ UC-06-U-xx

Specifications

• Single bowl
• Users: 1
• Wash Tools included: Four
• Galley Tap recommended: One
• Outside dimensions: 45 1/2” x 19 1/2” x 11 1/16”
• Interior dimensions: 44” x 18” x 10 3/4”
• Countertop cutout: 44” x 18”
• Basin area: 44” x 16″
• Minimum cabinet size: 48” or 120cm

Basin (KSO-4-S-TT-SS)

• 16GA 316L stainless steel indoor/outdoor SilentArmor™ sound reduction technology Angel finish
• Three tier design
• Star™ groove pattern
• Reversible side drain
• Drain cover included
• Limited Lifetime Warranty
• Made in the USA
• ASME A112.19.3/CSA B45.4 certified cUPC™ certified

Customize Your Galley

• Add 7-12” length
• Add 1-6” length
• Add 18″ DryDock
• Add 12″ DryDock
• Apron front
• 9” depth
• Center drain
• WorkTop™
• *Color coded labels available

Upper Deck®

• Cover set UD-4-2P-WA/GT/BA/GR/WH Walnut, Graphite, Bamboo, Gray or White Resin
• Sections Walnut, Graphite, Bamboo, Gray or White Resin

Recommended Basin Accessories & citrine®

• Bottom Grate set BG-4-S-2-SS Stainless Steel

• Strainer M-DRN-MSS
  Angel Finish 304 Stainless Steel

• Disposal Strainer G-DRN-MSS
  Angel Finish 304 Stainless Steel

• Auto Strainer Angel Finish 304 Stainless Steel with Polished or Matte knob

Ideal ThinTop™ WashStation™ 4S
SPECIFICATIONS | Right Hand Drain Orientation

Tap Hole Specifications

SUGGESTED GALLEY TAP PLACEMENT GUIDE

• Suggested maximum inside corner radius of countertop cutout 3/8”
• Galley Tap 1 3/8” min to 1 1/2″ max hole diameter
• Center Tap hole diameters 2” behind cutout
• Note: Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap
• Note: Tap Placements are for right hand or left hand drain orientation

Call 800.375.4255 or email [email protected] for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08

• WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN WAIVED AT THE TIME THE ORDER IS ACCEPTED.
• DWG and DXF templates available on our website:
  • TheGalley.com/specification-library
• Questions? For additional assistance, please contact
  The Galley’s Customer Care Department at 800.375.4255

Ideal ThinTop™ WashStation™ 4S
SPECIFICATIONS | Left Hand Drain Orientation

Tap Hole Specifications

SUGGESTED GALLEY TAP PLACEMENT GUIDE

• Suggested maximum inside corner radius of countertop cutout 3/8”
• Galley Tap 1 3/8” min to 1 1/2″ max hole diameter
• Center Tap hole diameters 2” behind cutout
• Note: Galley Hot & Cold Tap requires a minimum 8″ clearance to center if installed to the right of the Galley Tap
• Note: Tap Placements are for right hand or left hand drain orientation

Call 800.375.4255 or email [email protected] for additional guidance on Tap and Tap Accessory placements

Countertop Cutout Plan

STAINLESS STEEL COMPLIANCE ASME A112. 19.3-2008/CSA B45.4-08

• WE RESERVE THE RIGHT TO MAKE REVISIONS WITHOUT NOTICE IN THE DESIGN OF PRODUCTS OR IN PACKAGING UNLESS THIS RIGHT HAS SPECIFICALLY BEEN
• WAIVED AT THE TIME THE ORDER IS ACCEPTED.
• DWG and DXF templates available on our website:
  • TheGalley.com/specification-library
• Questions? For additional assistance, please contact
  The Galley’s Customer Care Department at 800.375.4255

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>