THE GALLEY IAG1MSS Ideal Air Gap Installation Guide
- June 12, 2024
- THE GALLEY
Table of Contents
THE GALLEY IAG1MSS Ideal Air Gap
Product Information
The Air Gap (IAG-1) is a device used in plumbing to prevent wastewater from siphoning back into the dishwasher. It is a safety feature required by most plumbing codes. The Air Gap is made up of three main parts: the Air Gap top, Mounting washer, and Bottom Clamp nut. It also includes a Threaded Air Gap Piping Body that connects to the dishwasher drain hose and the sink drain. The Air Gap is designed to fit countertops with a maximum thickness of 1-1/4 inches, and requires a 1-3/8 inch diameter hole for installation.
The Galley Tap comes with a Limited Lifetime Mechanical Warranty. The warranty covers manufacturing defects in materials and workmanship under normal usage for the useful life of the product. The warranty is subject to certain conditions and limitations.
Product Usage Instructions
- Before installation, ensure that you have all the necessary parts included in the package.
- Using an adjustable wrench, attach the Bottom Clamp nut to the Threaded Air Gap Piping Body.
- Place the Mounting washer on top of the Air Gap top.
- Insert the Threaded Air Gap Piping Body through the hole in the sink and place the Mounting washer and Air Gap top on top of the sink.
- Tighten the Bottom Clamp nut until the Air Gap is secure and does not move.
- Connect the dishwasher drain hose to the Threaded Air Gap Piping Body.
- Connect the sink drain to the Threaded Air Gap Piping Body.
- Ensure that all connections are tight and secure.
- Refer to The Galley website for care and maintenance instructions.
If you have any issues with the Air Gap, please refer to the warranty information provided. For warranty claims, contact your Galley Dealer or write to The Galley, LLC at the address provided.
Parts Included
- A. Air Gap top
- B. Mounting washer
- C. Bottom Clamp nut
- D. Threaded Air Gap Piping Body
Required Tool
ADJUSTABLE WRENCH
Installation
Warranty
The Galley Tap – Limited Lifetime Warranty
GALLEY TAP LIMITED LIFETIME MECHANICAL WARRANTY —
Seller provides a Limited Lifetime Mechanical Warranty. Seller warrants its
products, installed in a residential application, to be free from
manufacturing defects in materials and workmanship under normal usage for the
useful life of the product. This Limited Lifetime Mechanical Warranty is
subject to the warranty conditions and limitations as set forth below.
GALLEY TAP LIMITED LIFETIME FINISH WARRANTY —
Seller provides a Limited Lifetime Finish Warranty. For the following
Finishes: Polished Stainless Steel, Matte Stainless Steel, PVD Satin Black
Stainless Steel, PVD Gun Metal Gray™ Stainless Steel, PVD Polished Rose Gold
Stainless Steel and PVD Brushed Gold Stainless Steel, seller warrants its
finishes, installed in a residential application, to be free from
manufacturing defects in materials or workmanship for the useful life of the
product. Please refer to the Seller’s Care Instructions for the proper
maintenance of Seller’s finishes. This Limited Lifetime Finish Warranty is
subject to the warranty conditions and limitations as set forth below.
WARRANTY CONDITIONS AND LIMITATIONS —
Seller’s Mechanical and Finish warranties are non-transferable and are
strictly limited to products correctly installed using our installation
instructions and used in a residential environment. Mechanical or finish
problems which result from abuse, misuse, improper installation, improper
maintenance, (including not properly winterizing the Tap in outdoor
installations), improper cleaning, proximity to bodies of saltwater, or
accidental damage such as scuffs and scratches are not covered by this
warranty. Seller does not assume liability for labor charges, removal and
reinstallation expenses, freight or postage charges, or injuries resulting
from a defective product. This warranty does not allow recovery of incidental
or consequential damages such as loss of use, property damage, or any other
consequential damage and Seller accepts no liability for such damage. Seller
does not assume any responsibility other than to repair or replace the
defective part(s) after Seller, upon its examination, has determined the
product to be defective and the defective part(s) are covered by the Limited
Lifetime Warranty expressed in this warranty. Whether to repair or replace the
product shall be at the sole election of the Seller. In no event shall the
liability of The Galley exceed the purchase price of the Tap. The use of
Plumber’s Putty will void this warranty. A non-corrosive epoxy silicone
sealing compound may be used. Seller hereby disclaims all other warranties,
expressed or implied, other than those set forth in this warranty. Some states
do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you. This
warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
CARE AND MAINTENANCE —
For care and maintenance instructions of all Galley products, please refer to
the Use and Care section on thegalley.com.
WARRANTY CLAIMS —
These warranties are in effect for Seller’s Products purchased on January 1st,
2017 and thereafter. For warranty claims, please contact your Galley Dealer,
or you may write to:
- The Galley, LLC.
- Attn: Warranty Claims
- 12626 South Memorial Drive
- Bixby, OK 74008
Please include the original receipt with a description of the problem, model number, store, date of purchase, your name, address and telephone number.
The Galley, LLC.
12626 South Memorial Drive, Bixby, OK 74008
800.375.4255 | thegalley.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>